Prevalence and severity of dental fluorosis in relation to fluoride in ground water in the villages of Birbhum district, West Bengal, India

In relation to fluoride in ground water, dental fluorosis is studied in seven villages, viz., Nasipur, Vabanandapur, and Deshnabagram under Nalhati I block and Kamdebpur, Chalk Atla, Nowapara, and Junitpur under Rampurhat II block, of Birbhum district, West Bengal, India. Water samples (N = 70) were collected from the tube wells of the mentioned villages in the months of December 2010 to February 2011 and analyzed for fluoride and other water parameters. The study result revealed that the fluoride levels of almost all the water samples (95.7%) were higher than 1.5 mg/L, with mean values of 3.15 and 3.83 mg/L in Nalhati I block and Rampurhat II block, respectively. Dental fluorosis of 490 respondents was visually determined by a competent dentist using Dean’s index (DI) and the tooth surface index of fluorosis (TSIF). According to the DI, the percentage of severely affected respondents was lowest in Chalk Atla (0%) and highest in Deshnabagram (50%). The percentage of severely affected respondents was lowest in Kamdebpur and Chalk Atla (0%) and highest in Nowapara (20%) according to the TSIF score. The age group 10–20 years showed the highest percentage of severe DI (40.8%) and the age group 21–30 years showed the highest percentage of severe TSIF (22.51%) compared to the other age groups in the study. The positive relationship between the fluoride level in water and the severity of dental fluorosis has been proved statistically. The high mean score of dental fluorosis indicates that dental fluorosis is endemic throughout the study area.     

Large-Eddy Simulations of the Atmospheric Boundary Layer Using a New Subgrid-Scale Model – II. Weakly and moderately stable cases

A series of simulations under weakly to moderately stable boundary layers (SBLs) have been performed using the proposed subgrid-scale (SGS) model implemented into the Terminal Area Simulation System (TASS). The proposed SGS model incorporates some aspects of the two-part eddy viscosity SGS model of Sullivan et al. (1994) and further refinements which include the dependence of SGS mixing length on stratification, two-part separation of the SGS eddy diffusivity of heat, and more realistic empirical forms of Monin–Obukhov similarity functions. The potential temperature profiles from simulations clearly show a three-layer structure: a stable surface layer of strong gradients, a middle layer of small gradients, and an inversion layer on the top. The wind speed profiles show the formation of low level jet (LLJ). However, the sub-layer structures under moderately SBLs differ from those under weakly SBLs. Both the momentum and heat fluxes decrease almost linearly in the lower part of the SBL. The near surface values of the normalized turbulent kinetic energy (TKE/u _* ²) in all simulations are about 4 which is much less than the typical value of 5.5 under the neutral condition. The decay of turbulence first occurs in the area with large values of Richardson number (R _i<0.2). Generally, instantaneous values of the TKE and R _i at the various grid points are negatively correlated, but there is not a unique relationship between the two parameters.     

Assessment of phenol infiltration resilience in soil media by HYDRUS-1D transport model for a waste discharge site

The movement of contaminants through soil imparts a variety of geo-environmental problem inclusive of lithospheric pollution. Near-surface aquifers are often vulnerable to contamination from surface source if overlying soil possesses poor resilience or contaminant attenuation capacity. The prediction of contaminant transport through soil is urged to protect groundwater from sources of pollutants. Using field simulation through column experiments and mathematical modeling like HYDRUS-1D, assessment of soil resilience and movement of contaminants through the subsurface to reach aquifers can be predicted. An outfall site of effluents of a coke oven plant comprising of alarming concentration of phenol (4–12.2 mg/L) have been considered for studying groundwater condition and quality, in situ soil characterization, and effluent characterization. Hydrogeological feature suggests the presence of near-surface aquifers at the effluent discharge site. Analysis of groundwater of nearby locality reveals the phenol concentration (0.11–0.75 mg/L) exceeded the prescribed limit of WHO specification (0.002 mg/L). The in situ soil, used in column experiment, possess higher saturated hydraulic conductivity (K _S ?=?5.25?×?10^?4 cm/s). The soil containing 47 % silt, 11 % clay, and 1.54 % organic carbon content was found to be a poor absorber of phenol (24 mg/kg). The linear phenol adsorption isotherm model showed the best fit (R ²?=?0.977, RMSE?=?1.057) to the test results. Column experiments revealed that the phenol removal percent and the length of the mass transfer zone increased with increasing bed heights. The overall phenol adsorption efficiency was found to be 42–49 %. Breakthrough curves (BTCs) predicted by HYDRUS-1D model appears to be close fitting with the BTCs derived from the column experiments. The phenol BTC predicted by the HYDRUS-1D model for 1.2 m depth subsurface soil, i.e., up to the depth of groundwater in the study area, showed that the exhaustion point was reached within 12 days of elapsed time. This clearly demonstrated poor attenuation capacity of the soil to retard migration of phenol to the groundwater from the surface outfall site. Suitable liner, based on these data, may be designed to inhibit subsurface transport of phenol and thereby to protect precious groundwater from contamination.     

Concentrations of microcystins in tissues of several fish species from freshwater reservoirs and ponds

The aim of this study is to summarise the determination of concentrations of microcystins (MCs) in muscle and liver of freshwater fish species caught in stagnant waters of the Czech Republic. Within the years 2007–2009, 351 muscle samples and 291 liver samples of 16 freshwater fish species derived from four fishponds, and four water reservoirs were analysed. MCs were detected in 53 liver samples. The highest concentrations of microcystins were determined in liver samples of carnivorous fish species; 50.3 ng/g of fresh weight (FW) in perch (Perca fluviatilis) and 22.7 ng/g FW in pikeperch (Sander lucioperca). MCs in liver were detected in other five fish species; asp (Aspius aspius), pike (Esox lucius), common carp (Cyprinus carpio), grass carp (Ctenopharyngodon idella) and European eel (Anguilla anguilla). Concentrations of MCs in liver of nine fish species (European bream, whitefish, tench, silver carp, European catfish, roach, chub, crucian carp and rudd) were below the detection limit of 1.2–5.4 ng/g FW for different MC congeners. However, the concentrations of MCs in all muscle samples were below the detection limit. The assessment of MCs concentrations might be influenced by the detection method used. Due to the concentrations of MCs being below the detection limit in muscle samples of all fish species analysed, it seems that there might be a low potential threat for human health in case of fish muscle consumption.     

Heavy Metal Accumulation in Lichens from the Hetauda Industrial Area Narayani Zone Makwanpur District, Nepal

Lichen samples collected in and around Hetauda Industrial area,(HIA) Narayani zone, Makwanpur district, Nepal, were analyzedfor Cr, Ni, Pb, Zn, Ca, Mn, Fe, Si, and Al. The samples fromthe location inside the industrial area have higher levels ofmetal than the outside areas. Pyxine meissnerina growinginside the industrial area accumulated higher levels of all themetals analyzed.     

Graphitic carbon nitride: a sustainable photocatalyst for organic pollutant degradation and antibacterial applications

Environmental Science and Pollution Research - Recently, graphitic carbon nitride (GCN) has been found to be of great interest in various sustainable applications. In this study, a simple...     

Nitric oxide–secreting probiotics as sustainable bio-cleaners for reverse osmosis membrane systems

Environmental Science and Pollution Research - Membrane biofouling in water purification plants is a serious issue of worldwide concern. Various chemical, physical, and biochemical processes are...     

Accumulation of Polyhydroxyalkanoates by Rhizobacteria Underneath Nickel-Hyperaccumulators from Serpentine Ecosystem

Nickel-resistant bacteria isolated from underneath Ni-hyperaccumulators growing on serpentine soils were screened for production of polyhydroxyalkanoates. These rhizobacteria accumulated poly-3-hydroxybutyric acid [P(3HB)] accounting 3.9–67.7% of cell dry weight during growth in gluconate and/or glucose. Cupriavidus pauculus KPS 201 utilized only gluconate and accumulated about 67.7% P(3HB) while, Bacillus firmus AND 408 utilized both carbon sources for polymer synthesis. The isolates being resistant to Ni also accumulated substantial amount of P(3HB) when grown in presence of the heavy metal and this was revealed by transmission electron microscopic studies. Although B. firmus AND 408 produced only P(3HB) at higher concentrations of gluconate, C. pauculus KPS 201 synthesized copolymer of 3-hydroxybutyric acid (3HB) and 3-hydroxyvaleric acid (3HV) [P(3HB-co-3HV)]. In presence of 0.8% gluconate and 4 mM Ni, KPS 201 cells produced PHA amounting 81% CDW, which contained 76 and 24 mol% 3HB and 3HV monomers, respectively.