Factor Biases and Promoting Sustainable Development: Adaptation to Drought in the Senegal River Basin

The ongoing drought in the Sahel region of West Africa highlights the vulnerability of food-producing systems to climate change and variability. Adaptation to climate should therefore increase the sustainability of agriculture under a long-term drought. Progress towards sustainability and adaptation in the the Senegal River Basin is hampered by an existing set of social and ecological relationships that define the control over the means of production and how people interact with their environment. These relationships are sensitive to the technological inputs and the administration of food production, or the factor bias in the different policy alternatives for rural development. One option is based on state-controlled, irrigated plantations to provide rice (Oryza) for the capital, Dakar. This policy emphasizes a top-down management approach, mechanized agriculture and a reliance on external inputs which strengthens the relationships introduced during the colonial period. A time series decomposition of the annual flow in the Senegal River at Bakel in Senegal suggests that water resources availability has been substantially curtailed since 1960, and a review of the water resources budget or availability in the basin suggests that this policy's food production system is not sustainable under the current climate of the basin. Under these conditions, this program is exacerbating existing problems of landscape degradation and desertification, which increases rural poverty. A natural resource management policy offers two adaptation strategies that favour decentralized management and a reduction of external inputs. The first alternative, “Les Perimetres Irrigués”, emphasizes village-scale irrigation, low water consumption cereal crops and traditional socio-political structures. The second alternative emphasizes farm-level irrigation and agro-forestry projects to redress the primary effects of desertification.     

Agricultural pesticide residues in farm ditches of the Lower Fraser Valley, British Columbia, Canada

Transient and permanent farm ditches flowing to the Lower Fraser River tributary fish streams of British Columbia, Canada, were sampled at several locations in 2003-2004 to determine the occurrence and concentration of residues of selected pesticides, their transformation products, and soluble/extractable Cu++ ions. Of the 43 compounds analyzed, 28 and 22 pesticides were detected in transient farm ditch water and sediments, respectively. About 34% fewer pesticides, however, were found in both matrices of permanent farm ditches. Average concentrations (microg L(-1)) of those most frequently detected in permanent farm ditch water were atrazine (0.20), alpha -chlordane (0.06), desethylatrazine (0.13), diazinon (0.55), dieldrin (0.28), endosulfan sulfate (0.16), glyphosate (6), metalaxyl (0.27); and soluble Cu++ ions (25). Those most often found in ditch sediments (microg kg(-1)) were aminomethylphosphonic acid (AMPA) (2,300), 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)ethane (DDT) (250), endosulfan sulfate (500), glyphosate (1,225); and extractable Cu++ ions (58,000). The risk potential of these pesticide residues to non-target aquatic organisms inhabiting Fraser River tributary fish streams contiguous to permanent farm ditches is evaluated and discussed.     

Effect of specimen planar area on electromagnetic flanging

The specimen parameter that is often mentioned with respect to the ability to achieve electromagnetic forming (EMF) is the specimen thickness. If the skin depth is small compared to this parameter, efficient forming will be achieved. However, another parameter that may affect the ability to achieve efficient forming is the specimen's planar area, i.e., the length and width of the specimen. This would particularly become an important factor if EMF is used to fabricate meso/microscale components. In this research, a flat spiral coil was used to flange 0.508 mm thickness, CuZn30 specimens of varying widths (i.e., 10, 14, 18, 22, 35, and 47 mm). These widths were varied in order to modify the projected area of the coil over the specimen. Results showed that a decrease in the specimen width was generally associated with a decrease in forming (i.e., lower flanging angle) due to edge effects in induced eddy currents. Since the magnetic field distribution from the flat spiral coil is asymmetric, material was overhung on both sides of the die. This yielded an extra half turn on the left side of the specimen, and increased forming. The die was also translated to assess differences in flanging generated. In order to achieve meso/microforming with EMF, attention to the interaction between coil design and specimen dimensions is required.     

Muscle tetanus and loading condition effects on the elastic and viscous characteristics of the thorax

Thoracic deformation under an applied load is an established indicator of injury risk, but the force required to achieve an injurious level of deformation currently is not understood adequately. This article evaluates how two potentially important factors, loading condition and muscle tensing, affect the structural response of the dynamically loaded thorax. Structural models of two human cadaver thoraxes and two porcine thoraxes were used to quantify the effects. The human cadavers, which represent anthropometric extremes, were subjected to anterior loading from (1) a 5.1-cm-wide belt oriented diagonally (i.e., seatbelt-like loading), (2) a 15.2-cm-diameter rigid hub, and (3) a 20.3-cm-wide belt oriented laterally (i.e., a distributed load). A structural model having the mathematical formulation of a quasilinear viscoelastic material model was used to model the elastic and viscous response, with ramp-hold tests used to determine the model coefficients. The effect of thoracic musculature was assessed using similar ramp-hold tests on the porcine subjects, each with and without forced muscle contraction. Even maximally contracted thoracic musculature is shown to have a minimal effect on the response, with similar elastic and viscous characteristics exhibited by each subject regardless of muscle tone. The elastic response is shown to be approximately a factor of three stiffer for diagonal belt loading and for this distributed loading condition than for the hub loading, indicating that the response is influenced most by the particular anatomical structures that are engaged and, secondarily, by the area of load application. Specifically, shoulder involvement is shown to have a strong influence. The force relaxation is found to be pronounced, but insensitive to the loading condition, with long-time force relaxation coefficients (G( infinity )) in the range of 0.1 to 0.3. The findings of this study provide restraint-specific guidelines for the force-deflection characteristics of both physical and computational thoracic models.     

Watershed Management and Organizational Dynamics: Nationwide Findings and Regional Variation

Recent attention has focused on resource management initiatives at the watershed scale with emphasis on collaborative, locally driven, and decentralized institutional arrangements. Existing literature on limited selections of well-established watershed-based organizations has provided valuable insights. The current research extends this focus by including a broad survey of watershed organizations from across the United States as a means to estimate a national portrait. Organizational characteristics include year of formation, membership size and composition, budget, guiding principles, and mechanisms of decision-making. These characteristics and the issue concerns of organizations are expected to vary with respect to location. Because this research focuses on organizations that are place based and stakeholder driven, the forces driving them are expected to differ across regions of the country. On this basis of location, we suggest basic elements for a regional assessment of watershed organizations to channel future research and to better approximate the organizational dynamics, issue concerns, and information needs unique to organizations across the country. At the broadest level, the identification of regional patterns or organizational similarities may facilitate the linkage among organizations to coordinate their actions at the much broader river basin or ecosystem scale.     

A methodology for assessing blast protection in explosive ordnance disposal bomb suits.

To reduce human casualties associated with explosive ordnance disposal, a wide range of protective wear has been designed to shield against the blast effects of improvised explosive devices and munitions. In this study, 4 commercially available bomb suits, representing a range of materials and armor masses, were evaluated against 0.227 and 0.567 kg of spherical C-4 explosives to determine the level of protection offered to the head, neck, and thorax. A Hybrid III dummy, an instrumented human surrogate [1], was tested with and without protection from the 4 commercially available bomb suits. 20 tests with the dummy torso mounted to simulate a kneeling position were performed to confirm repeatability and robustness of the dummies, as well as to evaluate the 4 suits. Correlations between injury risk assessments based on past human or animal injury model data and various parameters such as bomb suit mass, projected area, and dummy coverage area were drawn.     

Improvements in Fluvial Stability Associated with Two‐Stage Ditch Construction in Mower County,Minnesota

Water quality and stream habitat in agricultural watersheds are under greater scrutiny as hydrologic pathways are altered to increase crop production. Agricultural drainage ditches function to remove water quickly from farmed landscapes. Conventional ditch designs lack the form and function of natural stream systems and tend to be unstable and provide inadequate habitat. In October of 2009, 1.89 km of a conventional drainage ditch in Mower County, Minnesota, was converted to an alternative system with a two‐stage channel to investigate the improvements in water quality, stability, and habitat. Longitudinal surveys show a 12‐fold increase in the pool‐riffle formation. Cross‐sectional surveys show an average increase in bankfull width of approximately 10% and may be associated to an increased frequency in large storm events. The average increase in bankfull depth was estimated as 18% but is largely influenced by pool formation. Rosgen Stability Analyses show the channel to be highly stable and the banks at a low risk of erosion. The average bankfull recurrence interval was estimated to be approximately 0.30 years. Overall, the two‐stage ditch design demonstrates an increase in fluvial stability, creating a more consistent sediment budget, and increasing the frequency of important instream habitat features, making this best management practice a viable option for addressing issues of erosion, sediment imbalance, and poor habitat in agricultural drainage systems.