Climate adaptation of food value chains: the implications of varying consumer acceptance

Despite there being considerable research and knowledge surrounding the risks of climate change on agricultural productivity, fewer studies have examined risks from a whole-of-chain perspective (i.e. from producer to consumer) and the perceptions of consumers about the climate adaptation strategies of food businesses. This paper presents the findings of a survey of 1532 Australian consumers and how they might respond to a food company’s climate adaptation strategy. Three respondent archetypes, ‘Eco-warriors’ (n = 557), ‘Undecideds’ (n = 600) and ‘Abdicators’ (n = 375), were identified based on their perceptions of risks associated with climate change and their attitudes towards climate adaptation. Further analysis was carried out to understand how each group of respondents would respond to adaptation strategies employed by food companies. Based on the findings of this study, two main challenges are presented for food value chains: (1) translating consumer needs and preferences to niche opportunities arising from adaptation and (2) understanding how best to communicate adaptation benefits based on varying attitudes and information needs. By addressing these challenges, synergies between adaptation goals and competitive strategies in food value chains may be achieved.     

Characterization of gaseous pollutant and particulate matter emission rates from a commercial broiler operation part II: Correlated emission rates

Emission rates of ammonia, acid gases, inorganic aerosols, methane, and size fractionated particulate matter were measured from a commercial broiler facility. This paper discusses the statistically influential parameters on numerous pollutants’ emission from a broiler chicken facility and generates emission correlations to fill data gaps and develop averaged emission factors.Live mass of the birds was commonly a significant variable to each pollutant’s emission. Some variables significantly impacted the pollutants’ emissions, such as litter moisture content, but were measured discretely and cannot be used for filling in data gaps.House parameter correlations were, therefore, developed using parameters measured at the facility, such as indoor temperature, relative humidity, and the live mass of the birds, and relied on the mutual behaviour of discretely measured explanatory parameters and continuously monitored confounding variables. The live mass and the difference in the indoor temperature and the house set-point temperature were the most significant variables in each pollutant’s correlation.The correlations predicted each pollutants emission to within 20% (total mass basis) over most broiler production cycles. Their validation on independent datasets also successfully estimated the flocks’ emissions to within 3%.Emission factors (EFs) were developed for methane, ammonia, and size fractionated particulate matter using measured data and correlated emissions to fill in data gaps. PM₁₀ (particulate matter ≤10 microns) EFs were estimated to be 4.6 and 5.9 g d^?1 [Animal Unit, AU]^?1 for five and six week production cycles, respectively. PM_2.5 (PM ≤ 2.5 microns) EFs were 0.8 and 1.4 g d^?1 AU^?1 for five and six week cycles, respectively. Ammonia and methane emission factors were estimated at 120.8 and 197.0 g d^?1 AU^?1, respectively for a five week production cycle.     

The impact of size on the fate and toxicity of nanoparticulate silver in aquatic systems

The increased use of silver nanomaterials presents a risk to aquatic systems due to the high toxicity of silver. The stability, dissolution rates and toxicity of citrate- and polyvinylpyrrolidone-coated silver nanoparticles (AgNPs) were investigated in synthetic freshwater and natural seawater media, with the effects of natural organic matter investigated in freshwater. When sterically stabilised by the large PVP molecules, AgNPs were more stable than when charge-stabilised using citrate, and were even relatively stable in seawater. In freshwater and seawater, citrate-coated AgNPs (Ag–Cit) had a faster rate of dissolution than PVP-coated AgNPs (Ag–PVP), while micron-sized silver exhibited the slowest dissolution rate. However, similar dissolved silver was measured for both AgNPs after 72 h in freshwater (500–600 μg L⁻¹) and seawater (1300–1500 μg L⁻¹), with higher concentrations in seawater attributed to chloride complexation. When determined on a mass basis, the 72-h IC50 (inhibitory concentration giving 50% reduction in algal growth rate) for Pseudokirchneriella subcapitata and Phaeodactylum tricornutum and the 48-h LC50 for Ceriodaphnia dubia exposure to Ag⁺ (1.1, 400 and 0.11 μg L⁻¹, respectively), Ag–Cit (3.0, 2380 and 0.15 μg L⁻¹, respectively) and Ag–PVP (19.5, 3690 and 2.0 μg L⁻¹, respectively) varied widely, with toxicity in the order Ag⁺ > Ag–Cit > Ag–PVP. Micron-sized silver treatments elicited much lower toxicity than ionic Ag⁺ or AgNP to P. subcapitata. However, when related to the dissolved silver released from the nanoparticles the toxicities were similar to ionic silver treatments. The presence of natural organic matter stabilised the particles and reduced toxicity in freshwater. These results indicate that dissolved silver was responsible for the toxicity and highlight the need to account for matrix components such as chloride and organic matter in natural waters that influence AgNP fate and mitigate toxicity.     

Emissions of Trace Products of Incomplete Combustion from a Pilot-Scale Incinerator Secondary Combustion Chamber

Abstract

Experiments were performed on a 73 kW rotary kiln incinerator simulator equipped with a 73 kW secondary combustion chamber (SCC) to examine emissions of products of incomplete combustion (PICs) resulting from incineration of carbon tetrachloride (CC14) and dichloromethane (CH2C12). Species were measured using an on-line gas chromatograph (GC) system capable of measuring concentrations of eight species of volatile organic compounds (VOCs) in a near-realtime fashion. Samples were taken at several points within the SCC, to generate species profiles with respect to system residence time. For the experiments, the afterburner on the SCC was operated at conditions ranging from fuel-rich to fuellean, while the kiln was operated at a constant set of conditions. Results indicate that combustion of CH2C12 produces higher levels of measured PICs than combustion of CC14, particularly 1, 2 dichlorobenzene, and to a lesser extent, monochlorobenzene. Benzene emissions were predominantly affected by the afterburner air/fuel ratio regardless of whether or not a surrogate waste was being fed.     

Aerosol Entrainment from a Sparged Non-Newtonian Slurry

Abstract

Previous bench-scale experiments have provided data necessary for the development of empirical models that describe aerosol entrainment from bubble bursting. However, previous work has not been extended to non-Newtonian liquid slurries. Design of a waste treatment plant on the Hanford Site in Washington required an evaluation of the applicability of these models outside of their intended range. For this evaluation, aerosol measurements were conducted above an air-sparged mixing tank filled with simulated waste slurry possessing Bingham plastic rheological properties. Three aerosol-size fractions were measured at three sampling heights and for three different sparging rates. The measured entrainment was compared with entrainment models. One model developed based on bench-scale air-water experiments agreed well with measured entrainment. Another model did not agree well with the measured entrainment. It appeared that the source of discrepancy between measured and modeled entrainment stemmed from application beyond the range of data used to develop the model. A possible separation in entrainment coefficients between air-water and steam-water systems was identified. A third entrainment model was adapted to match experimental conditions and fit a posteri to the experimental data, resulting in a modified version that resulted in estimated entrainment rates similar to the first model.     

Use of Stable Isotopes to Identify Sources of Mercury in Sediments: A Review and Uncertainty Analysis

Mass-dependent and mass-independent mercury isotope fractionation potentially generates unique source signatures that can be used to apportion contributions to sediment contamination. This article reviews findings from previous investigations that have used mercury isotopes to identify sources. It also discusses a mass balance mercury isotope fractionation model that simulates changes in isotopic source signatures in aquatic systems caused by natural biogeochemical cycling. According to the model, the extent of source signature alteration depends on chemical speciation, with more labile forms exhibiting greater isotopic fractionation. Apportionment is tractable when differences between δ²⁰²Hg of sources are larger than potential changes in isotopic signatures following the release of mercury into the environment.     

Predator-prey interactions between Synbranchus marmoratus (Teleostei: Synbranchidae) and Hypsiboas pulchellus tadpoles (Amphibia: Hylidae): importance of lateral line in nocturnal predation and effects of fenitrothion exposure

Environmental contaminants can disrupt interactions between aquatic species by altering community structure. We explored predator-prey interactions between marbled swamp juvenile eels (Synbranchus marmoratus; predator) and anuran tadpoles (Hypsiboas pulchellus; prey) in relation to two aspects: the importance of lateral line in the predator and whether the absence of light modifies predation rates; and the effect of a sub-lethal concentration of fenitrothion on both predator and prey. Eels were tested under two sensory conditions (lateral line intact and lateral line blocked by cobalt chloride) in dark conditions. Predation rates were evaluated using different treatments that combined predator and prey exposed or not to insecticide. Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) activities were also measured in muscle samples of eels and tadpoles to explore whether fenitrothion affects predator and prey differentially. Marbled swamp eels were more efficient in feeding on tadpoles during the night than during the day, showing that lateral line makes an important contribution to prey detection and capture. Regarding pesticide effects, short-term (6 h) exposure to an ecologically relevant fenitrothion dose of 2.5 mg L(-1) altered the predator-prey relationship by changing prey behaviour, reducing prey detection and therefore increasing tadpole survival. At this concentration, the outcome of the predator-prey relationship appears biased in favor of the exposed tadpoles, which were released from predation risk, despite their altered behaviour and the higher inhibition percentages of tail BChE (70%) and AChE (51%) than in control individuals. Our study involving these model species and agrochemicals demonstrates that fenitrothion affected the outcome of a predator-prey relationship. Further studies are needed, in these species and other native amphibians, to investigate the nature of the mechanisms responsible for the adverse effects of pesticides on antipredator behaviour and predation efficiency.     

Treatment of mercury‐contaminated soils with activated carbon: A laboratory,field, and modeling study

A series of laboratory batch leaching tests was conducted to evaluate the performance of different activated carbons in stabilizing mercury in soils. Based on the results of these experiments, an amendment application rate of 5 percent powdered activated carbon (PAC) was selected for in situ field application at a former industrial facility. A geochemical model was also developed to simulate the interactions between mercury and activated carbon in vadose‐zone soils. Modeling was used to (1) better understand possible mercury sequestration mechanisms and (2) predict the in situ performance of PAC. Model results indicate dissolved mercury concentrations observed in batch tests are consistent with equilibrium partitioning of mercury between dissolved organic matter, soil organic matter, and PAC. Activated carbon is predicted to reduce dissolved mercury concentrations via two mechanisms: (1) the formation of stable mercury complexes on PAC surfaces and (2) the direct adsorption of dissolved organic matter that would otherwise be available for mercury dissolution. Study results demonstrate PAC effectiveness for site soils with mercury concentrations below 200 mg/kg. © 2010 Wiley Periodicals, Inc.