A tribute to Trevor Kletz: What we are doing and why we are doing it

The goal of my tribute to Trevor Kletz is to show a view of his overall influence on many of the elements of process safety: how he helped establish a strong foundation on which we are building our future process safety risk reduction efforts.     

Laboratory and Field Evaluation of the Controlled Condensation System for S03 Measurements in Flue Gas Streams

The study reported by this paper involves the use of the Controlled Condensation System (Goksoyr/Ross Coil) for flue gas S0₃ measurements in both the laboratory and the field, under low and high mass loadings. The Controlled Condensation System cools the flue gas to below the dewpoint of H₂S0₄ but above the H₂0 dewpoint. The resulting aerosol is collected either on the coil walls or on the back-up glass frit. The laboratory recovery of the H₂S0₄ in streams of varying S0₂, H₂0, and H₂S0₄ content was found to be 95 ± 6%. A new quartz filter holder was designed to meet the filtration problems encountered in collecting S0₃ from particle laden flue gas streams. This quartz system, when heated to above 250°C, quantitatively passed the H₂S0₄ into the condensation coil. Later studies with this filter system preloaded with fly ash equivalent to a mass loading of 1.3 g/m³ yielded a 80-85% recovery of H₂S0₄. The laboratory system was simultaneously tested at a 150 megawatt, pulverized coal-fired power plant prior to and after a wet limestone FGD. The inlet grain loading to the FGD ranged from 0.06 g/m³ to 11.4 g/m³ with S0₂ concentrations as high as 4000 ppm. The average inlet H₂S0₄ value was 8.3 ppm and the outlet from the FGD was 3.1 ppm. The source fluctuation value was determined to be ±65%.     

Acid Rain Emission Allowances and Future Capacity Growth in the Electric Utility Industry

While the new source emission offset provision contained in recent acid rain proposals would result in increasing utility costs over time, the demand for emission offsets from new powerplant units should be satisfied even under conditions of high future growth in electrical generating capacity. This is because the amount of emissions from new generating units will be small relative to the quantity of offsets that could be made available in the emission “allowance” market.

Under the President’s July 1989 proposal, most utilities would be able to reduce their emissions well below their allowance levels via fuel switching, the installation of control technology, or the use of other emission reduction techniques, in order to create more “headroom” for the construction of new generating units. Retirements and decreasing utilization of existing power plants over time would liberate other emission allowances for use by new units. Industrial sources could “opt in” to the acid rain program and provide allowances for new generating units as well. A number of provisions in the recently passed Senate and House bills would make still further sources of allowances available to offset emissions from new generating capacity.

Hoarding of allowances by utilities is unlikely to be a problem since allowances would be distributed to at least 88 utilities in 34 states, and many of these utilities would have the ability to cost-effectively free up more allowances through “overcontrol” than they would need to cover their own future growth. Even a relatively small number of utilities in a limited number of states would have the ability to supply all of the allowances needed to cover new capacity growth from those entities that could not otherwise provide their own offsets. At projected prices of up to $800/ton, the incentives for utilities to sell allowances would be considerable. Moreover, if hoarding did begin to occur, the price of allowances would respond by rising to higher levels and the incentives for utilities to sell allowances would become even more compelling, as greater opportunities would develop for reducing costs (and electricity rates).     

summary of the California aerosol characterization experiment

This report gives a brief summary of the experimental plan and the early results of field observations from the California Aerosol Characterization Experiment (ACHEX). The objectives of the program center on questions of the sources and evolution of aerosols in urban air, as they are superimposed on a natural background, particularly as they relate to visibilitydegradation. The project initially nvolved the use of an elaborately instrumented mobile laboratory combined with a fixed station in San Jose, in Pasadena, and in Riverside, and later incorporated several satellite monitoring stations in the Los Angeles Basin. Intensive field observationswere taken from July 1972 to November 1972 in several urban and nonurban locations between the San Francisco Bay area and the South Coast Basin, covering the Los Angeles area. In a second phase of the ACHEX, aerosols accompanying photochemical smog were studied intensively in the Los Angeles Basin during the period between July and October of 1973. The observations cover a wide variety of parameters including physical and chemical properties of aerosols, pollutant gas concentrations, and meteorological variables. The initial results show the great importance of sulfate, nitrate, noncarbonate carbon, and liquid water to the mass concentration of airborne particles and their relation to reduction in visibility. The anthropogenic contribution to atmospheric aerosols is consistently found to be allocated primarily to the submicron or fine particle size range.     

A land use regression model for predicting ambient concentrations of nitrogen dioxide in Hamilton, Ontario, Canada

This paper reports on the development of a land use regression (LUR) model for predicting the intraurban variation of traffic-related air pollution in Hamilton, Ontario, Canada, an industrial city at the western end of Lake Ontario. Although land use regression has been increasingly used to characterize exposure gradients within cities, research to date has yet to test whether this method can produce reliable estimates in an industrialized location. Ambient concentrations of nitrogen dioxide (NO2) were measured for a 2-week period in October 2002 at > 100 locations across the city and subsequently at 30 of these locations in May 2004 to assess seasonal effects. Predictor variables were derived for land use types, transportation, demography, and physical geography using geographic information systems. The LUR model explained 76% of the variation in NO2. Traffic density, proximity to a highway, and industrial land use were all positively correlated with NO2 concentrations, whereas open land use and distance from the lake were negatively correlated with NO2. Locations downwind of a major highway resulted in higher NO2 levels. Cross-validation of the results confirmed model stability over different seasons. Our findings demonstrate that land use regression can effectively predict NO2 variation at the intraurban scale in an industrial setting. Models predicting exposure within smaller areas may lead to improved detection of health effects in epidemiologic studies.     

Validation of three new methods for determination of metal emissions using a modified Environmental Protection Agency Method 301

Three new methods applicable to the determination of hazardous metal concentrations in stationary source emissions were developed and evaluated for use in U.S. Environmental Protection Agency (EPA) compliance applications. Two of the three independent methods, a continuous emissions monitor-based method (Xact) and an X-ray-based filter method (XFM), are used to measure metal emissions. The third method involves a quantitative aerosol generator (QAG), which produces a reference aerosol used to evaluate the measurement methods. A modification of EPA Method 301 was used to validate the three methods for As, Cd, Cr, Pb, and Hg, representing three hazardous waste combustor Maximum Achievable Control Technology (MACT) metal categories (low volatile, semivolatile, and volatile). The modified procedure tested the methods using more stringent criteria than EPA Method 301; these criteria included accuracy, precision, and linearity. The aerosol generation method was evaluated in the laboratory by comparing actual with theoretical aerosol concentrations. The measurement methods were evaluated at a hazardous waste combustor (HWC) by comparing measured with reference aerosol concentrations. The QAG, Xact, and XFM met the modified Method 301 validation criteria. All three of the methods demonstrated precisions and accuracies on the order of 5%. In addition, correlation coefficients for each method were on the order of 0.99, confirming the methods' linear response and high precision over a wide range of concentrations. The measurement methods should be applicable to emissions from a wide range of sources, and the reference aerosol generator should be applicable to additional analytes. EPA recently approved an alternative monitoring petition for an HWC at Eli Lilly's Tippecanoe site in Lafayette, IN, in which the Xact is used for demonstrating compliance with the HWC MACT metal emissions (low volatile, semivolatile, and volatile). The QAG reference aerosol generator was approved as a method for providing a quantitative reference aerosol, which is required for certification and continuing quality assurance of the Xact.     

Application of Harvey-Garabedian model for describing bacterial removal in Sand Abstraction Systems associated with ephemeral rivers

There have been concerted efforts to find alternative sources of water for small rural communities in the Southern Africa region, and one such initiative is Sand Abstraction Systems (SAS) or infiltration galleries. The sand formation of the riverbed of an ephemeral river is utilised as a natural filter giving potable water of high quality, but is prone to pathogenic contamination. The main objective of our study was to test the suitability of Harvey and Garabedian model for describing bacterial removal in SAS. The Harvey and Garabedian model with some modifications was adopted due to the few parameters required in applying the model. The coefficients and media properties were established from laboratory experiments and field studies. The implicit finite difference method was applied to solve the numerical model equation and to simulate the aquifer response to Escherichia coli for Nkayi SAS. The results of the bacterial simulation from the model fitted well with measured field data and with a small margin of error between the field results and the model (+/-5 coliform count/100 ml).     

Metabolic activity and elemental composition of krill and other zooplankton from Prydz Bay,Antarctica, during early summer (November–December)

Oxygen uptake and ammonia excretion rates, and body carbon and nitrogen contents were measured in krill (Euphausia superba) and eight other zooplankton species collected during November–December 1982 in the Prydz Bay, Antarctica. From these data, metabolic O:N ratios (by atoms), body C:N ratios (by weight) and daily metabolic losses of body carbon and nitrogen were calculated as a basis from which to evaluate seasonal differences in metabolism and nutritional condition. Comparison of the present data with mid-summer (January) data revealed that early-summer E. superba were characterized by higher metabolic O:N ratios (58.7 to 103, compared with 15.9 to 17.5 for mid-summer individuals). Higher O:N ratios of early-summer E. superba resulted largely from reduced ammonia excretion rates and, to a lesser degree, from slightly increased oxygen uptake rates. Body C:N ratios of E. superba were low in early-summer (3.8 to 4.2) compared with mid-summer krill (4.1 to 4.7) due to lowered body-carbon contents in the former (42.6 to 43.6% compared with 43.2 to 47.5% dry weight of midsummer individuals); gravid females formed an exception, since no seasonal differences in body elemental composition were detected for these. No significant changes in water content (75.3 to 81.4% wet wt) and nitrogen content (9.9 to 11.1% dry wt) in E. superba were evident between the two seasons. Seasonal differences in metabolic rates and elemental composition were less pronounced in a salp (Salpa thompsoni), but a higher metabolic O:N ratio occurred in early-summer individuals. Interspecific comparison of the seven remaining zooplankton species studied with twelve species from mid-summer zooplankton investigated in an earlier study indicated that higher metabolic O:N ratios in early-summer are characteristic not only of herbivore/filter-feeders, but also of some carnivores/omnivores. No relationship between metabolic O:N ratios and body C:N ratios was apparent either intraspecifically or interspecifically, within or between early-summer and mid-summer seasons.     

Measurement of organic compound emission using small test chambers

Organic compounds emitted from a variety of indoor materials have been measured using small (166 L) environmental test chambers. The paper discusses: a) factors to be considered in small chamber testing; b) parameters to be controlled; c) the types of results obtained. The following types of materials have been tested: adhesives, caulks, pressed wood products, floor waxes, paints, and solid insecticides. Selected data are presented. For each material, chamber concentrations of organic compounds have been determined for a range of environmental conditions (e.g., air exchange rate, temperature and relative humidity). Emission rates for individual organic compounds, as well as total measured organics, were calculated. The effects of environmental variables on emission rates have been evaluated. Models are used to evaluate the effect of chamber walls and concentration on emission rates.