Combustion characteristics of Malaysian municipal solid waste and predictions of air flow in a rotary kiln incinerator

Malaysia is in dire need of alternatives to landfilling for solid waste management. Recently, landfills have faced the problems of overfilling, overflowing of leachates leading to pollution of water resources, and uncontrolled dust emissions adversely affecting the local environment. With the rising cost of urbanization coupled with the high rate of waste generation, one possible method of waste treatment that is receiving particular attention by the government is incineration. Incineration of solid waste is rather new in Malaysia, with limited usage in handling small sources of waste generation such as the municipal solid waste (MSW) of resort islands; however, its potential in ameliorating the problems associated with solid waste treatment may make it an attractive alternative to landfill. This article presents the results of test runs conducted to investigate the performance of a locally designed and manufactured rotary kiln incinerator (RKI). The test runs were conducted using MSW collected from the Shah Alam municipality. The combustion efficiency was analyzed by looking at the temperature profiles and chemical species concentrations. To complement the combustion characteristics measurements, predictions of the air flow in the incinerator during the process were also investigated. The overall performance of the RKI suggests that it is suitable for treating MSW.     

Processing and Properties of Mixtures of PHB-V with Post-consumer LDPE

Mixtures of poly-β-(hydroxybutyrate-co-valerate) PHB-V with virgin and post-consumer low density polyethylene (LDPE) were prepared by melt mixing in proportions of 100/0, 90/10, 80/20, 70/30 and 0/100 (wt/wt%). The mixtures were analysed by infrared spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), melting flow index (MFI), tensile tests, scanning electron microscopy (SEM) and biodegradation in simulated soil. The DMTA and DSC curves of post-consumer LDPE suggested that this polymer was a mixture of LDPE and linear low density polyethylene (LLDPE). Virgin and post-consumer LDPE had lower MFI than PHB-V, but the blends showed higher index as the content of LDPE increased. The addition of LDPE reduced the tensile strength and Young’s modulus of the mixtures compared with PHB-V. SEM indicated poor interfacial adhesion between PHB-V and LDPE. PHB-V degraded slow and gradually, while both LDPE showed virtually no degradation under the conditions studied. The biodegradability of the blends depended on their composition and of the type of LDPE. LDPE improved the biodegradability of the mixtures.     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.

Relationships between street characteristics and perceived attractiveness for walking reported by elderly people

Walking is important for the health of elderly people. Previous studies have found a relationship between neighbourhood characteristics, physical activity and related health aspects. The multivariate linear regression model presented here describes the relationships between the perceived attractiveness of streets for walking along and (physical) street characteristics. Two hundred and eighty-eight independently living elderly people (between 55 and 80 years old) participated in the study. Street characteristics were assessed along homogeneous street subsections defined as ‘links’. Positively related to perceived attractiveness of links were the following street characteristics: slopes and/or stairs, zebra crossings, trees along the route, front gardens, bus and tram stops, shops, business buildings, catering establishments, passing through parks or the city centre, and traffic volume. Litter on the street, high-rise buildings, and neighbourhood density of dwellings were negatively related to perceived link attractiveness. Overall, the results suggest that three main aspects affect perceived attractiveness of streets for walking, namely tidiness of the street, its scenic value and the presence of activity or other people along the street. The results are discussed within the context of these three aspects.     

Goals and remedial strategies for water quality and wildlife management in a coastal lagoon--a case-study of Ringkøbing Fjord, Denmark

The aim of this work is (1) to discuss approaches and tools to set management goals using operational indicators for coastal management (i.e., indicators that are easy to measure, understand and predict) and validated predictive models and (2) to discuss remedial strategies for sustainable coastal management regarding water quality and the abundance of fish, waterfowl and large aquatic plants. These approaches are exemplified using data from Ringkøbing Fjord, Denmark, which has undergone two major regime shifts during the last decades. This work discusses the changes taken place during the period from 1980 to 2004 (when there are good empirical data). For Ringkøbing Fjord, which is a very shallow, well-oxygenated lagoon dominated by resuspension processes, we have targeted on the following operational indicators, which are meant to reflect seasonal median values for the entire defined coastal area (the ecosystem scale) and not conditions at individual sites or data from shorter time periods: Secchi depth (as a standard measure of water clarity) and chlorophyll-a concentrations (as a key measure of algal biomass). The operational indicators are regulated by a set of standard abiotic factors, such as salinity, suspended particulate matter (SPM), nutrient concentrations (N and P), coastal morphometry and water exchange. Such relationships are quantified using well-tested, general quantitative models, which illustrate how these indicators are interrelated and how they reflect fundamental aspects of coastal ecosystems. We demonstrate that the regime shift in the lagoon can be modelled and quantitatively explained and is related to changes in salinity and nutrient inflow. A very important threshold is linked to increased salinities in the lagoon. For example, when the mean annual salinity is higher than about 9.5‰, large numbers of saltwater species of clams can survive and influence the structure and function of the ecosystem in profound ways. The model also illustrates the dynamic response to changes in nutrient loading. We have presented several management strategies with the goal of keeping the Secchi depth at 2 m, which would stimulate the growth of higher aquatic plants, which are fundamental for fish production and bird abundance in the lagoon. Given the fact that the Secchi depth depends on many variable factors (temperature, TP-inflow from land, salinity, changes in biomasses of macrophytes and clams, which are accounted for in these simulations), our results indicate that in practice it will likely be very difficult to reach that goal. However, it would be realistic to maintain a Secchi depth of 1.5 m if the variability in salinity is minimized and the mean salinity is kept at about 10.2‰.     

Sustainable construction--the role of environmental assessment tools

Construction has been accused of causing environmental problems ranging from excessive consumption of global resources both in terms of construction and building operation to the pollution of the surrounding environment, and research on green building design and using building materials to minimise environmental impact is already underway. However, relying on the design of a project to achieve the goal of sustainable development, or to minimise impacts through appropriate management on site, is not sufficient to handle the current problem. The aim for sustainability assessment goes even further than at the design stage of a project to consider its importance at an early stage, before any detailed design or even before a commitment is made to go ahead with a development. However, little or no concern has been given to the importance of selecting more environmentally friendly designs during the project appraisal stage; the stage when environmental matters are best incorporated. The main objectives of this paper are to examine the development, role and limitations of current environmental building assessment methods in ascertaining building sustainability used in different countries which leads to discuss the concept of developing a. sustainability model for project appraisal based on a multi-dimensional approach, that will allow alternatives to be ranked is discussed in detail in the paper.     

A paradigm of an integrated transboundary environmental education,training, and technology transfer project

The Rodopi mountain range is located between Greece and Bulgaria and constitutes a natural and political boundary whose crest delimits the frontier between the two countries. However, these two neighboring countries have significant differences: Greece is one of the oldest members of the European Union (EU) while Bulgaria has just recently entered the European family. As a result, the existing financial and political differences between the two nations are also reflected in issues concerning the environmental know-how, education, and training, since Greece seems to have a small lead in these fields. On the other hand, given that Bulgaria possesses exceptional scientific personnel, it has made significant progress in all aspects of environmental policy during the last decade by absorbing up-to-date knowledge and putting it into practice; thus, catching up with the other EU countries in environmental issues is just a matter of time. Taking these factors into account, the Department of Forestry and Natural Environment Management of the Technological Educational Institute of Kavala (Greece) and the Department of Geography-Ecology and Natural History (Bulgaria) prepared a joint proposal which was approved and financed by the European Union Initiative ΙNTERREG IIIΑ/PHARE CBC GREECE-BULGARIA. The proposal concerns the Rodopi mountains and focuses on integrated environmental education, technology exchange, and transfer between the two institutions. The Rodopi complex constitutes a very important ecosystem of particular ecological and biological interest for both countries. This paper reveals the cooperation possibilities on environmental education and know-how exchange with regard to the shared natural resources of these contiguous countries.     

Particle fluxes above forests: observations, methodological considerations and method comparisons

This paper reports a study designed to test, evaluate and compare micro-meteorological methods for determining the particle number flux above forest canopies. Half-hour average particle number fluxes above a representative broad-leaved forest in Denmark derived using eddy covariance range from -7x10(7) m(-2) s(-1) (1st percentile) to 5x10(7) m(-2) s(-1) (99th percentile), and have a median value of -1.6x10(6) m(-2) s(-1). The statistical uncertainties associated with the particle number flux estimates are larger than those for momentum fluxes and imply that in this data set approximately half of the particle number fluxes are not statistically different to zero. Particle number fluxes from relaxed eddy accumulation (REA) and eddy covariance are highly correlated and of almost identical magnitude. Flux estimates from the co-spectral and dissipation methods are also correlated with those from eddy covariance but exhibit higher absolute magnitude of fluxes.     

Initial Changes in Refilled Lysimeters Built with Metal Polluted Topsoil and Acidic or Calcareous Subsoils as Indicated by Changes in Drainage Water Composition

Soil translocation for recultivation of soil removed from construction sites and for the preparation of refilled lysimeters inevitably involves disturbance of soil structure, and, if intermediate storage is included, also drying and rewetting of the soil. We report on an experiment with model forest ecosystems, where uncontaminated forest subsoils were covered with non-contaminated or freshly heavy metal (mainly Zn and Cu) contaminated topsoil in large lysimeters. Monitoring of the chemical composition of the drainage water revealed two distinct soil conditioning phases. During an initial phase of about a year strongly elevated nitrate and sulfate concentrations occurred that were attributed to a mineralisation flush caused by the increased accessability of mineralisable nitrogen and sulfur in destroyed aggregates. These effects were significantly larger in lysimeters with calcareous subsoil than in those with acidic subsoil. The second phase was characterised by a gradual decrease in dissolved organic carbon and sulfate concentrations, in particular in the acidic subsoil. This decrease may be attributed to the depletion of pools made accessible during aggregate destruction or the formation of new aggregates. These chemical changes had only little effects on the concentrations of copper and zinc in the drainage water. Based on our results, it can be concluded that large refilled lysimeters can be used for many purposes without risk of compromised results, if a conditioning phase of about 1 year with sufficiently moist soil conditions is respected. Nevertheless, gradual changes in soil chemical characteristics still occur after this initial phase. Implications for the recultivation of sites using relocated soils are discussed.