Study on Biodegradable Starch/OMMT Nanocomposites for Packaging Applications

The thermoplastic starch (TPS) and nanocomposite(TPS/OMMT) was prepared with 15% carbamide, 15% ethanolamine and different contents of organic activated montmorillonite (OMMT) by twin-screw extruder with a 130 °C barrel temperature. Fourier transforms infrared spectroscopy and wide angle X-ray diffraction shown that the alkylamine in dodecyl benzyl dimethyl ammonium bromide could react with MMT via cation exchange reaction. After treated, the d(001)space distance of MMT increased from 1.5 to 1.7 nm. Scanning electron microscope revealed that the lower contents of OMMT could disperse well in the matrixes of TPS. The carbamide, ethanolamine and the OMMT could destroy the crystallization behavior of starch, but only the OMMT restrained this behavior for long-term storing. Mechanical properties investigation indicated that the tensile strength and modulus of TPS/OMMT nanocomposites were better than those of TPS, while the elongation at break was descended with the increasing of OMMT contents. When the content of OMMT was 4%, the tensile strength and modulus of TPS was improved from 4.2 and 42 MPa to 6.0 and 76 MPa, respectively.     

Cascade-based attack vulnerability on the US power grid

The vulnerability of real-life networks subject to intentional attacks has been one of the outstanding challenges in the study of the network safety. Applying the real data of the US power grid, we compare the effects of two different attacks for the network robustness against cascading failures, i.e., removal by either the descending or ascending orders of the loads. Adopting the initial load of a node j to be L_j=[k_j(Σ_mΓjk_m)]^α with k_j and Γ_j being the degree of the node j and the set of its neighboring nodes, respectively, where α is a tunable parameter and governs the strength of the initial load of a node, we investigate the response of the US power grid under two attacks during the cascading propagation. In the case of α<0.7, our investigation by the numerical simulations leads to a counterintuitive finding on the US power grid that the attack on the nodes with the lowest loads is more harmful than the attack on the ones with the highest loads. In addition, the almost same effect of two attacks in the case of α=0.7 may be useful in furthering studies on the control and defense of cascading failures in the US power grid.     

Modification of Fe–Mn mixed oxide COS removal sorbent by rare-earth oxides addition

In order to develop highly active sorbent for COS removal, Fe–Mn mixed oxides doped with CeO₂, La₂O₃ or Sm₂O₃ were studied. The effects of these promoters on the structural properties of Fe–Mn oxides were investigated by XRD, BET, TPR and TEM techniques. XRD results revealed that the degree of crystallinity of Fe–Mn oxide phase decreased due to the addition of rare-earth oxides. Doping with CeO₂, La₂O₃ or Sm₂O₃ led to an increase in BET surface area of the sample. TPR studies showed that the reactivity of the reduction of doped samples increased in the temperature range of 300–450 °C. In addition, the desulfurization test was performed at 325 °C with a gas hourly space velocity of 1000 h⁻¹. It was found that the addition of 3% La₂O₃ greatly improved the absorption sulfur capacity of the sorbent, while the sorbent doped 3% CeO₂ achieved a sufficiently high purifying degree before breakthrough.     

基于MATLAB平台的凝聚相爆炸模型的分析与程序实现

主要利用MATLAB程序,实现凝聚相爆炸事故(CPE)的模型分析与计算,通过对凝聚相爆炸模型的分析和后果模拟,得出死亡、重伤的区域半径,为安全评价及分析的定量评价提供技术支撑.     

城市网格化管理与安全社区建设

社区是城市的基本组成单元,社区安全是保障城市平稳、安全、有序运行的基础。随着我国经济的迅速发展和改革的不断深化,社区在城市管理中的基础地位和作用日益突出,安全社区的建设也越来越引起国内外专家、学者的广泛关注。     

企业员工不安全行为的产生原因

1企业员工不安全行为的产生原因 企业员工不安全行为的产生原因较为复杂,是多方面因素综合作用的结果。其中有个体内在因素：如生理因素、心理因素、知识和技能因素等;有外在客观因素：如环境因素、管理因素等。     

CN-测定中显色剂配制方法的选择与保存时间

对2种氰化物显色剂配制方法进行了对比,发现用无水乙醇配制的显色剂具有方便,经济,实用,无毒且显色剂保存期长等优势。     

塔山水库蓝藻暴发的成因及控制

简述了塔山水库蓝藻暴发的过程及成因。指出 ,由于水库的营养物质增多、水质恶化 ,在不利的水文、气象 (高温、光照充足、微风 )等条件下 ,导致蓝藻暴发。提出了相应的控制对策     

Characteristics of atmospheric carbonyls and VOCs in Forest Park in South China

The diurnal variation of atmospheric carbonyls and VOCs in a forest in south China were studied in summer 2004. Twenty kinds of carbonyls and eight kinds of VOCs were identified and quantified. Formaldehyde and acetaldehyde were the two most abundant carbonyls, while the most abundant VOCs were isoprene, followed by o-xylene. Most C₃-C₁₀ carbonyls had higher concentrations from 09:00 to 15:00, and their levels were lower during night-time and often reached the lowest in early morning. Formaldehyde and acetaldehyde, however, showed two high levels in their diurnal patterns partly due to their different sources and sinks. The VOCs had different diurnal patterns compared to most carbonyls. The highest concentrations were observed from 03:00 to 06:00 for 1-butene, from 06:00 to 12:00 for isoprene, and from 12:00 to 15:00 for α-pinene. The highest levels for aromatic hydrocarbons occurred during midnight and the lowest in late afternoon. According to the study, emissions from vegetation and photo-oxidation of gas-phase hydrocarbons were the main sources for some carbonyls and VOCs in this region. Other compounds, such as formaldehyde, acetaldehyde and BTEX, showed anthropogenic sources.