电解锰渣基方沸石的制备及其对Pb2+的吸附性能

以电解锰渣为原料,经过"弱酸除杂-碱融活化-室温陈化-晶化"水热合成反应体系,在分别外加铝源和硅源的条件下制备方沸石ANA-A及ANA-S,运用XRF、XRD、SEM-EDS和BET等表征手段对2种方沸石的化学组成、晶相结构、微观形貌和比表面积进行分析。结果表明:在煅烧温度750℃、合成温度180℃、水热反应时间8 h的条件下,外加铝源和硅源均可合成方沸石。进一步研究2种沸石对水溶液中Pb2+的静态吸附性能,其所合成的电解锰渣基ANA-A及ANA-S方沸石均可以很好地用Langmuir等温模型拟合,属于单分子层吸附,饱和吸附量分别为161.29,185.19 mg/g,对初始浓度为100 mg/L的Pb2+去除率分别为93.69%和95.47%,且均符合Lagergren准二级动力学模型,属于化学吸附;两者中ANA-S的吸附效果更好。     

Dynamic nano-Ag colloids cytotoxicity to and accumulation by Escherichia coli: Effects of Fe3+, ionic strength and humic acid

Released Ag ions or/and Ag particles are believed to contribute to the cytotoxicity of Ag nanomaterials, and thus, the cytotoxicity and mechanism of Ag nanomaterials should be dynamic in water due to unfixed Ag particle:Ag⁺ ratios. Our recent research found that the cytotoxicity of PVP-Ag nanoparticles is attributable to Ag particles alone in 3 hr bioassays, and shifts to both Ag particles and released Ag⁺ in 48 hr bioassays. Herein, as a continued study, the cytotoxicity and accumulation of 50 and 100 nm Ag colloids in Escherichia coli were determined dynamically. The cytotoxicity and mechanisms of nano-Ag colloids are dynamic throughout exposure and are derived from both Ag ions and particles. Ag accumulation by E. coli is derived mainly from extracellular Ag particles during the initial 12 hr of exposure, and thereafter mainly from intracellular Ag ions. Fe³⁺ accelerates the oxidative dissolution of nano-Ag colloids, which results in decreasing amounts of Ag particles and particle-related toxicity. Na⁺ stabilizes nano-Ag colloids, thereby decreasing the bioavailability of Ag particles and particle-related toxicity. Humic acid (HA) binds Ag⁺ to form Ag⁺-HA, decreasing ion-related toxicity and binding to the E. coli surface, decreasing particle-related toxicity. HA in complex conditions showed a stronger relative contribution to toxicity and accumulation than Na⁺ or Fe³⁺. The results highlighted the cytotoxicity and mechanism of nano-Ag colloids are dynamic and affected by environmental factors, and therefore exposure duration and water chemistry should be seriously considered in environmental and health risk assessments.     

Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

Investigation to meet China II emission legislation for marine diesel engine with diesel methanol compound combustion technology

In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time, the use of clean and renewable alternative fuel for marine engines is a promising option. In this study, a marine diesel engine, which was modified to run in diesel methanol compound combustion (DMCC) mode, was investigated. After the diesel injection parameters were calibrated, and combined with a sample after-treatment device DOC (diesel oxidation catalyst), the engine could meet the requirements of China II legislation. The overall MSP (methanol substitute percent) reached 54.1%. The value of each pollutant emission was much lower than that in China II emission legislation, and there was almost no methanol and formaldehyde emissions. When methanol was injected into the inlet manifold, the intake air temperature decreased a lot, as well as the exhaust gas temperature, which were beneficial to increase engine thermal efficiency and improve engine room environment. Compared with the engine running in pure diesel mode, when the engine ran in diesel/methanol dual fuel mode, the combustion phase was advanced, and the combustion duration became shorter. Therefore, the engine thermal efficiency increased, and fuel consumption decreased significantly.     

生态调控后贵州花溪水库浮游植物群落结构的变化特征及影响因素

为了解生态调控后花溪水库浮游植物功能群变化特征与环境因子的关系,基于浮游植物功能群、NMDS（非度量多维尺度分析）、RDA（冗余分析）、Pearson相关性分析方法,于2017年3月-2018年3月逐月对浮游植物群落结构与水环境指标进行采样分析.结果表明:①生态调控前,花溪水库共鉴定浮游植物4门18种,共归类出10个功能群,且功能群H1占绝对优势,其代表藻种为水华束丝藻（Aphanizomenon flosaquae）;生态调控后,共鉴定浮游植物6门66种,共归类出20个功能群,主要优势功能群为B/Lo,其代表藻种为小环藻（Cyclotella sp.）和多甲藻（Peridinium sp.）.②生态调控后,花溪水库优势功能群结构发生了变化,其变化特征为B/Lo（春季）→D/B/Lo/X2/N/P（夏季）→D/B/Lo/N（秋季）→D/MP/B/Lo/W1/W2（冬季）.功能群B的生物量在春季达到峰值（3 056.3 μg/L）,与其对低营养环境有良好的耐受性有关;功能群Lo的生物量在秋季达到峰值（2 900.9 μg/L）,与组成功能群Lo的甲藻特性有关.③RDA结果表明,生态调控前影响浮游植物生长的环境因子为SD（透明度）、ρ（DIN）（DIN为无机氮）;生态调控后影响浮游植物生长的环境因子为WT（水温）、ρ（DO）、ρ（DIN）.研究显示,生态调控后花溪水库功能群结构发生了明显变化,影响功能群变化的主要环境因子为WT和ρ（DO）.      

基于TMVOC的地下水位波动带苯系物迁移转化模拟

为探究水位波动情况下苯系物的迁移转化规律,提高石油污染场地地下水污染治理精度,以西北某傍河石化场地为研究对象,基于TMVOC模型对特征污染物苯系物开展泄漏模拟,通过情景模拟比较水位波动对苯系物迁移转化的影响,并从污染分布、相间转化等方面,解析地下水位稳定和波动状态下苯系物迁移转化过程差异.结果表明:①TMVOC模型较好地模拟了水位波动状态下苯系物迁移转化过程.②相较于水位稳定状态下,水位波动作用下苯系物污染深度增加0.5 m,污染面积增加25%,总质量增加12 kg.③水位稳定和波动状态下苯系物"气-液-NAPL（Non-Aqueous Phase Liquids）相"占比分别为0.17%、2.03%、97.8%和0.04%、3.69%、96.27%.④NAPL相苯系物饱和度分布与苯系物质量分布呈正相关,水位波动造成NAPL相初始饱和度降低,且初始水位面以下NAPL相饱和度升高.⑤对于苯而言,水位波动状态下非饱和带中苯在液相中的质量是水位稳定状态下的1.11倍,饱和带为10.15倍.研究显示,水位波动显著地影响了苯系物的迁移转化过程,促进了苯系物的溶解,并使更多的苯系物残留在地下介质中.      

某垃圾焚烧厂投产前后周边土壤二英类化合物的分布

为研究垃圾焚烧厂运行对周边土壤二英类化合物（PCDD/Fs）含量的影响,采集了珠三角地区某垃圾焚烧厂投产前和投产后周边土壤样品,分析研究了该垃圾焚烧厂运行对周边土壤中PCDD/Fs含量和组分的变化.结果表明:①2012年（投产前）珠三角地区某垃圾焚烧厂周边土壤PCDD/Fs含量较低,范围为163~591 ng/kg（毒性当量范围为0.198~0.863 ng I-TEQ/kg,I-TEQ为国际毒性当量因子折算的毒性当量值）;2017—2019年（投产后）周边土壤PCDD/Fs含量范围为151~1.75×103 ng/kg（毒性当量范围为0.812~3.88 ng I-TEQ/kg）,与其他研究相比处于较低的水平.②投产后,距该垃圾焚烧厂较近（1.5 km）的采样点（S1）土壤PCDD/Fs含量逐年增长,在较远（5.2 km）但人口较密集的采样点（S3）土壤PCDD/Fs含量整体较高,但呈逐年下降趋势.③投产后,土壤中的17种PCDD/Fs单体组分中,毒性当量贡献率最高的单体为八氯二苯并二英（OCDD）和2,3,4,7,8-五氯二苯并呋喃（2,3,4,7,8-PeCDF）,二者毒性当量贡献率范围为15.7%~45.4%.④在同一采样点土壤PCDD/Fs单体组分年间差异不明显,但同一年份不同采样点差异明显.研究显示,目前该垃圾焚烧厂周边土壤PCDD/Fs含量较低,但仍需要长期监测其可能带来的风险.      

长三角背景点夏季大气PM2.5中水溶性无机离子污染特征及来源解析

为研究长三角背景点夏季PM_2.5污染特征,于2018年5月30日—8月15日在上海市崇明岛对PM_2.5样品进行昼夜采集,并对其中水溶性无机离子(Cl-、NO₃-、SO₄2-、Na+、NH₄+、K+、Mg2+、Ca2+)进行了分析.运用PSCF(潜在源贡献)方法判别污染物排放源区,并结合PCA(主成分分析)和PMF(正交矩阵因子)源解析探究PM_2.5来源.结果表明:①观测期间崇明岛ρ(PM_2.5)平均值为(33±21)μg/m3,低于GB 3095—2012《环境空气质量标准》一级标准限值(35 μg/m3),但在部分时段存在显著超标现象,ρ(PM_2.5)最高值在120 μg/m3以上.②水溶性无机离子质量浓度平均值为(14±9.3)μg/m3,占PM_2.5的42.4%,其中SNA(SO₄2-、NO₃-、NH₄+三者统称)为主要离子,占水溶性离子总质量浓度的85.7%.③n(NH₄+)/n(SO₄2-)(NH₄+与SO₄2-的摩尔浓度比)显示,清洁期〔ρ(PM_2.5) < 15 μg/m3〕呈贫铵状态,过渡期〔15≤ρ(PM_2.5)≤35 μg/m3〕和污染期〔ρ(PM_2.5)>35 μg/m3〕均呈富铵状态;过渡期SNA主要以NH₄HSO₄和NH₄NO₃形式存在,而污染期则主要以(NH₄)₂SO₄和NH₄NO₃形式存在.④通过对两次典型污染事件进行离子相关性分析和PSCF分析发现,E1污染事件(5月30日—6月8日)为局地生物质燃烧型污染事件,E2污染事件(7月23日—8月1日)为区域传输污染事件.源解析结果进一步表明,两次典型污染事件期间气态污染物的二次转化对PM_2.5的贡献最显著,贡献率分别为62.8%和59.8%;其次是生物质燃烧,其贡献率分别为32.5%和20.1%;E2污染事件期间海盐源对崇明岛PM_2.5贡献率较高(16.6%),远超过E1污染事件期间对PM_2.5的贡献率(2.7%).研究显示,区域输送对崇明岛PM_2.5有显著贡献,二次颗粒物累积是崇明岛PM_2.5超标的主要原因.      

新冠肺炎疫情期间我国居民佩戴口罩防护行为研究

口罩作为阻隔病毒传染的物理方式之一,其能阻断病原体经飞沫传播,同时具有双向隔离保护作用.佩戴口罩对于公众防范新型冠状病毒（2019-nCoV）感染的风险和维持人体基本健康具有重要意义.为了解新型冠状病毒肺炎（COVID-19,简称“新冠肺炎”）疫情期间我国居民佩戴口罩的行为模式特征,基于新冠肺炎疫情期间我国人群环境暴露行为模式调查,分析全国31个省（自治区、直辖市）居民在新冠肺炎疫情期间佩戴口罩的行为特征,并探讨不同潜在风险人群佩戴口罩行为模式的差异性.结果表明:①在新冠肺炎疫情期间,我国人群外出佩戴口罩的比例在99%以上,显著高于非疫情期间的口罩佩戴率（16.05%）,其中,医务人员以及与人群广泛接触群体的口罩佩戴率最高（100%）.②居民以仅佩戴医用外科口罩、仅佩戴一次性使用医用口罩以及佩戴医用外科口罩和一次性使用医用口罩3种模式为主,占31种口罩佩戴模式的60%以上.③新冠肺炎疫情期间,不同职业人群、不同所属人群以及不同疫情地区人群佩戴口罩的比例均存在显著差异.④新冠肺炎疫情期间,我国居民佩戴口罩的更换频次多为累计使用时长4 h更换一次和累计使用时长24 h更换一次.⑤人群外出佩戴口罩的比例随新冠肺炎疫情严重程度的升高而增加.尽管新冠肺炎疫情分布特征和管控措施存在差异,但居民佩戴口罩行为均表现良好,其中居住地不存在疑似病例的人群比居住地存在疑似病例的人群的口罩佩戴率更高,说明人群佩戴口罩行为与疫情的发展可能存在一定的相互作用.研究显示,新冠肺炎疫情期间我国人群佩戴口罩这一防护行为总体执行较好.