Evidence for the contribution of methane in the formation of aromatics and soot in fuel-rich pre-mixed combustion

Experimental results from an isothermal laminar flow reactor at atmospheric pressure are presented on the chemical composition in the post-oxidative region of two sooting fuel-rich pre-mixed mixtures diluted in nitrogen. A base case composed of n-heptane and O2 in N2 at 1425 K with a C/O of 2.85 was perturbed by substituting 10% of the carbon in n-heptane with carbon as CH4. While these changes would intuitively reduce aromatics and soot formation by increasing H2 and decreasing C2H2 concentrations, we observe the opposite. The concentrations of individual aromatic species are observed to actually increase by up to 50% and the soot yield increases by 80%.     

Predicting future invasion risk of three widespread malignant weeds on Qinghai-Tibet Plateau,using multi-algorithm ensemble models北大核心CSCD

农田恶性杂草相比普通杂草的传播更为迅速且难以有效防治,对农业生产危害严重.明确典型恶性杂草当前潜在分布面积及未来气候变化下对耕地的潜在入侵风险对农业生产管理具有重要意义.以广泛分布于青藏高原农田中的3种常见恶性杂草,即野燕麦(Avena fatua L.)、一年生早熟禾(Poa annua L.)和狗尾草[Setaria viridis(L.)P.Beauv.]为研究对象,利用广义增强模型(GBM)、广义线性模型(GLM)、人工神经网络(ANN)、最大熵(MaxEnt)、随机森林(RF)及多元自适应回归样条(MARS)算法集合预测上述3种杂草在青藏高原的潜在地理分布以及驱动其变化的关键因子,以评估其对耕地的入侵风险.未来气候场景采用最新的第六次国际耦合模式比较计划(CMIP6)框架下2050年的4种共享经济路线(SSP1-2.6、2-4.5、3-7.0、5-8.5).结果显示:野燕麦适宜分布区面积约为3.5912×10^(5) km^(2),主要分布于四川西南部及青海东部,零星分布于甘肃、西藏和新疆;一年生早熟禾和狗尾草的适宜分布区面积约为4.3046×10^(5) km^(2)和2.0036×10^(5) km^(2),均主要分布于四川西南部和西藏东南部,零星分布于青海东部和甘肃南部.年均温是3种杂草分布的最主要驱动因子.此外,人类足迹和土壤有效氮是影响野燕麦分布的相对重要因子;土壤酸碱度、最暖季降水量是影响一年生早熟禾分布的重要因子;温度季节性、最暖季降水量是影响狗尾草分布的重要因子.预计至2050年,3种杂草在4种情境下均会出现不同程度的扩张,狗尾草的扩张面积表现出随辐射强迫的增强呈先升高后趋于稳定的趋势,而另两种杂草则呈先升后降的趋势.预计3种杂草的潜在分布面积在耕地中的占比与扩张面积的变化趋势一致,且在主产区的占比高于非主产区.模拟结果表明,未来气候变化下,随着3种恶性杂草的适宜分布区面积的扩张,其对青藏高原耕地的入侵风险将增加,尤其是粮食主产区所面临威胁更为严峻,建议应重点关注青藏高原粮食主产区恶性杂草的生理生态、迁移扩散和防治技术研究.(图6表2参61)     

Effects of bio-organic fertilizers on pineapple heart rot and bacterial community structure北大核心CSCD

Heart rot is a common soil-borne disease in the pineapple industry, but the situation can be alleviated by the application of bio-fertilizers with beneficial microbiomes. Clarifying the controlling mechanism of bio-organic fertilizer on the high incidence of heart rot is critical in monocultural pineapple cropping patterns. In our study, the soil of continuous cropping pineapple orchards was collected. Three types of carriers (rapeseed cake, peat soil, and coconut bran), biocontrol strains (Bacillus subtilis HL2 and Streptomyces strain HL3), and organic fertilizer (YJ) were composted into different bio-fertilizers (KC, KN, KY, LC, LN, and LY), which were used in pot experiments. The controlling effect of the bio-fertilizer was determined based on the response of pineapple heart rot and bacterial communities to different fertilizing methods. Our results revealed that the incidence of heart rot in bio-fertilizer KC was the lowest, which decreased by 20% and 13.3%, respectively, compared to HF (chemical fertilizer, 16-16-16) and YJ (organic fertilizer). The richness and diversity of soil bacterial communities in all biofertilized treatments (KC, KN, KY, LC, LN, and LY) were significantly higher than those in HF. However, the α-diversity indices of the bio-fertilizers (KC, KN, and KY) were higher than those of LC, LN, and LY, and the bacterial community composition was significantly different. The bacteria GP4, GP6, Bacillus, and Azohydromonas were enriched in KC, KN, and KY, while the relative abundance of Streptomyces increased significantly in LC, LN, and LY. Furthermore, Spearman correlation analysis showed that the relative abundance of these bacterial groups was significantly negatively correlated with the incidence of pineapple heart rot. In summary, the application of bio-organic fertilizers can decrease the incidence of pineapple heart rot by altering the soil bacterial community structure and stimulating beneficial soil microorganisms, which is important for reconstructing the ecological balance in continuous pineapple orchards. © 2022 Authors. All rights reserved.     

Effect of different pearling times on the quality of hull-less barley rice北大核心CSCD

Hull-less barley is a special food crop rich in various nutrients in Qinghai-Tibet Plateau. Six-pearling is often used to produce commercial hull-less barley rice in order to improve its rough taste and inferior cooking quality. This study evaluated the differences in the nutritional, cooking, sensory, and storage qualities of hull-less barley rice with different pearling times to obtain suitable processing conditions for the production of high-quality hull-less barley rice. With increasing pearling time, the contents of vitamin B6, vitamin E, dietary fiber, iron, zinc, phenols, and flavonoids significantly decreased to a large extent, protein and vitamin B3 decreased slightly, the contents of total starch and β-glucan increased significantly, and γ-aminobutyric acid (GABA) initially increased and then decreased. The peak, trough, and final viscosity of whole grain barley were 1 860.50 cP, 914.50 cP, and 2 150.00 cP, respectively, and increased after six-pearling to 4 219.00 cP, 2 628.00 cP, and 5 074.00 cP, respectively. At the same time, the water absorption and volume expansion of the pearled hull-less barley increased significantly. The hardness of pearled hull-less barley reduced from 4 708.50 g to 2 282.00 g, its adhesiveness increased from 0.00 to -7.33, and its taste and sensory quality exhibited better. The activities of α-amylase, polyphenol oxidase, lipase, and catalase in pearled hull-less barley slightly decreased. Hull-less bran flour is rich in a variety of nutritional components and could be a potential resource with great developmental value. In general, hull-less barley rice obtained from three-pearling has high nutritional value, high cooking quality, low enzyme activity, and low energy consumption; therefore, it can be used to produce high-quality barley rice. This study provides important information for high-quality pearled hull-less barley and further utilization of barley bran flour. © 2022 Science Press. All rights reserved.     

Quantity and activity of ammonia-oxidizing archaea and bacteria and their contribution to ammonia oxidation in farmland soil of Qinghai-Tibet Plateau北大核心CSCD

Ammonia oxidation, the first and rate-limiting step of nitrification, is mainly performed by ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB). However, the activities of AOA and AOB in soil and their relative contribution to ammonia oxidation are unclear, and whether there is a significant correlation between the quantity of AOA and AOB and the ammonia oxidation rate is also controversial. In this study, quantitative PCR combined with acetylene (C2H2) and 1-octyne inhibition methods were used to determine the quantity and activity of AOA and AOB in wheat, highland barley, and oilseed rape soils in Nyingchi, Lhatse, Sangzhuzi, and Sangri counties on the Qinghai-Tibet Plateau. The results showed that the quantity of AOB ((2.34 ± 0.84) ×105 - (2.65 ± 1.07) ×106 copies g-1 dry soil) was significantly higher than that of AOA ((0.20 ± 0.10) ×104 - (4.02 ± 0.39) ×104 copies g-1 dry soil) in all the soil samples. Soil pH was the key factor affecting the quantity of AOB, and the total phosphorus and ammonium nitrogen in soil were the key factors affecting the quantity of AOA. The rates of ammonia oxidation in the farmland soils of Lhatse (2.42 ± 0.73 mg kg-1 d-1) and Sangzhuzi (3.24 ± 1.15 mg kg-1 d-1) were significantly higher than those in the soils of Nyingchi (1.17 ± 0.43 mg kg-1 d-1) and Sangri counties (0.88 ± 0.57 mg kg-1 d-1). The rates of ammonia oxidation in the farmland soils of Lhatse and Sangzhuzi were dominated by AOB, while those in the farmland soils of Nyingchi and Sangri counties were dominated by AOA. For crops, the ammonia oxidation rates of wheat and oilseed rape soils in all four regions were significantly higher than those of highland barley soil, whereas the activity of AOA and AOB was not influenced by crops. The ratio of nitrogen to phosphorus was the key factor influencing AOA activity, whereas soil pH and total carbon were the main factors influencing AOB activity. Additionally, the quantities of AOA and AOB were not significantly correlated with the total ammonia oxidation rates and AOA and AOB activity. Overall, our study suggests that both AOA and AOB play important roles in ammonia oxidation in farmland soils of the Qinghai-Tibet Plateau. Moreover, it is unreliable to predict the activity of AOA and AOB and their relative contribution to ammonia oxidation directly based on their number of amoA genes, and the activity of AOA and AOB should be directly and accurately measured. These results are important for understanding ammonia nitrogen removal processes, slowing nitrate loss, and reducing the emission of the greenhouse gas nitrous oxide in the farmland ecosystem of the Qinghai-Tibet Plateau. © 2022 Science Press. All rights reserved.     

Plastic waste as a valuable resource: strategy to remove heavy metals from wastewater in bench scale application

Environmental Science and Pollution Research - Single-use plastic waste is gradually considered a potential material for circular economy. Ion exchange resin obtained from polystyrene waste by...     

Biozide in Gebäudefassaden – ökotoxikologische Effekte, Auswaschung und Belastungsabschätzung für Gewässer

Background, aim and scope Sources of organic micropollutants occuring in surface waters are often unknown. Regarding environmental risk assessments for surface waters, construction materials have as till now, not been given much consideration, although biocides used as preservatives are known to reach urban storm water runoff. The study focused on biocides for facades coatings and aimed (1) to determine ecotoxicological effect values, (2) to quantify the leaching behaviour and (3) to assess the environmental risk for surface waters using a dynamic transport model. Materials and methods Eight biocides used in resin based facade coatings were investigated. Some biocides are substances known as pesticides for agricultural purposes like diuron, carbendazim and terbutryn. Ecotoxicological effect values for aquatic organisms were determined for every biocide. Leaching of four biocides from a render under UV-irradiation has been investigated in the laboratory including the influence of varying temperatures. Using 80 irrigation intervals over 28 days, facade runoff was sampled and followed by biocide chemical analysis. The total losses were calculated based on the concentration patterns. These data were used for modelling the transport of cybutryn from facades to surface waters. Biocide specific effect values and leaching characteristics have been taken into consideration. Results Acute and chronic effect values as well as predicted no effect concentrations for the investigated biocides indicate their high potential to affect aquatic organisms. The leaching of four biocides (diuron, terbutryn, cybutryn, carbendazim) from the facade render under the experimental conditions delivers high concentrations in the beginning followed by an exponential decrease. Rising temperature increased the concentration of biocides in the runoff. The total losses were between 7?% and 29?% depending on the substances. More than half of the losses occur in the runoff within the first 15 min of runoff from a 60 min irrigation cycle. The modelling result for cybutryn underlines its high environmental risk for small surface waters. Discussion The leaching of the biocides, their potential ecotoxic effects and persistence show clearly that the environmental risk for surface waters and soils seems to be high for certain biocides; whereas for others the risk seems to be significantly lower. With respect water quality criteria, polluted facades runoff has to be diluted before runoff can enter the discharge. Diuron and carbendazim are however also used as pesticides and preservatives for other materials and cybutryn is also used as an antifouling agent. All pathways have to be evaluated in order to identify relevant sources and to act more efficiently with respect to water and soil protection. Conclusions Concentrations with high environmental risk are expected at new facades, especially at facades with thermal insulation. With the given low predicted no effect concentrations in a range of a few ng/L and large amounts of biocides applied in paints and renders, the environmental risk for common biocides used in facade coatings has to be investigated in laboratory and field scale. It seems plausible that source control measures as the most efficient and sustainable precautionary principle need to be evaluated. Recommendations and perspectives Biocides and additives applied in construction materials have to be taken into consideration as relevant sources when evaluating the quality of storm water runoff, discharge into urban areas and the impact to soil and surface waters. A sustainable construction material management and storm water management are required. It is expected that ongoing laboratory and field studies with exterior paints, renders and flat sheets for waterproofing containing biocides and additives will give further insight into their environmental impact.     

Optimising the preparation of activated carbon from digested sewage sludge and coconut husk.

Preparation of activated carbon from sewage sludge is a promising way to dispose of sewage sludge as well as to produce a low-cost adsorbent for pollutant removal. This research work aimed to optimise the condition for activated carbon preparation from anaerobically digested sewage sludge with the additive coconut husk. The sewage sludge sample was mixed with the additive coconut husk. The preparation condition variables investigated involved the concentration of the ZnCl2 solutions, heating temperature, dwell time and heating rate in pyrolysis and the mixing ratio of coconut husk to sewage sludge. Surface area, pore size distribution, aqueous phenol adsorption capacity and the production yield of the final products were determined and compared. Experimental results revealed that low concentrations of ZnCl2 solution tended to improve the microporosity of the final product. Heating temperature had a considerable impact on the surface area, pore size distribution and phenol adsorption capacity of the final products, whereas dwell time and heating rate performed comparatively insignificantly. The effect of increasing the mixing ratio of coconut husk to sewage sludge was principally to increase the microporosity of the final products. The activated carbon with the highest BET surface area was produced with the activation of 5 M ZnCl2 solution and, thereafter, pyrolysis at a heating temperature of 500 degrees C for 2 h with a heating rate of 10 degrees C/min. The mixing ratio of 1:4 in terms of coconut husk to sewage sludge based on their dried weights was found to be most cost effective.     

多配位基螯合离子交换纤维的研究及其进展

离子交换纤锥作为具有高吸附佐的吸附材料，在金属离子的分离、富集、回收等方面，以及在水净处理净化处理领域得到了迅速的发展及应用，引起了人们的极大兴趣。本文对近十几年来离子交换纤维的合成方法路线、性能研究以及在痕量元素的分离、富集和水处理方面的应用进行了综述，并对目前离子交换纤维的研究中存在的问题提出了一些看法。