Bioventing Feasibility Assessment and System Design Using Subsurface Oxygen Sensors

Abstract

Vadose zone oxygen sensors can be effectively used to improve bioventing remediation design and monitoring. The capacity of the oxygen sensors for continuously monitoring oxygen concentrations unattended offers an improved approach for bioventing feasibility evaluation and respiration measurements. A new in-situ technique has been developed using these sensors for evaluating respiration rate at the startup of air injection or vapor extraction. This dynamic method imposes little restriction on the flowrate and soil conditions when the oxygen sensors are within the radius of influence, whereas a traditional in-situ oxygen uptake respiration test assumes a static condition. Oxygen uptake respiration tests measure a localized respiration rate. The dynamic method determines a spatially averaged respiration rate in the air flow path between injection point and a sensing point in air injection setup, or within the capture zone of a vapor extraction setup. Because respiration measurements can be made using the new technique at the startup of a remediation process, whether it is air injection or vapor extraction, it allows the process to run without interruption. Using the subsurface oxygen sensor, the dynamic method also allows the respiration rate to be continuously monitored. A case study at a site in Palm Springs, California is used to document the application of this new technique and its advantages. In addition to directly monitoring the radius of influence, the subsurface oxygen sensor can also provide necessary parameters to calculate a radius of influence for a given air injection rate. The Palm Springs case study demonstrates the application, as well as the limitation, of the radius of influence calculation.     

Valorization of winery waste vs. the costs of not recycling

Wine production generates huge amounts of waste. Before the 1990s, the most economical option for waste removal was the payment of a disposal fee usually being of around 3000 Euros. However, in recent years the disposal fee and fines for unauthorized discharges have increased considerably, often reaching 30,000–40,000 Euros, and a prison sentence is sometimes also imposed. Some environmental friendly technologies have been proposed for the valorization of winery waste products. Fermentation of grape marc, trimming vine shoot or vinification lees has been reported to produce lactic acid, biosurfactants, xylitol, ethanol and other compounds. Furthermore, grape marc and seeds are rich in phenolic compounds, which have antioxidants properties, and vinasse contains tartaric acid that can be extracted and commercialized. Companies must therefore invest in new technologies to decrease the impact of agro-industrial residues on the environment and to establish new processes that will provide additional sources of income.     

Differential partitioning and speciation of Hg in wet FGD facilities of two Spanish PCC power plants

This paper evaluates the speciation and partitioning of mercury in two Spanish pulverised coal combustion power plants (PP1 and PP2), equipped with wet limestone-based flue gas desulphurisation facilities (FGD) operating with forced oxidation and re-circulation of FGD water streams. These plants are fed with coal (PP1) and coal/pet-coke blends (PP2) with different mercury contents. The behaviour, partitioning and speciation of Hg were found to be similar during the combustion processes but different in the FGD systems of the two power plants. A high proportion (86-88%) of Hg escaped the electrostatic precipitator in gaseous form, Hg²⁺ being the predominant mercury species (68-86%) to enter the FGD. At this point, a relatively high total Hg retention (72% and 65%) was achieved in the PP1 and PP2 (2007) FGD facilities respectively. However, during the second sampling campaign for PP2 (2008), the mercury removal achieved by the FGD was much lower (26%). Lab-scale tests point to liquid/gas ratio as the main parameter affecting oxidised mercury capture in the scrubber. The partitioning of the gaseous mercury reaching the FGD system in the wastes and by-products differed. In the low mercury input power plant (PP1) most of the mercury (67%) was associated with the FGD gypsum. Moreover in PP2 a significant proportion of the gaseous mercury reaching the FGD system remained in the aqueous phase (45%) in the 2007 sampling campaign while most of it escaped in 2008 (74%). This may be attributed to the scrubber operating conditions and the different composition and chemistry of the scrubber solution probably due to the use of an additive.     

Characterization of alkali-activated thermally treated incinerator bottom ash

The fine fraction (<14mm) of incinerator bottom ash (IBA) obtained from a UK energy from waste plant has been milled and thermally treated at 600, 700, 800 and 880 degrees C. Treated materials have been activated with Ca(OH)(2) (10wt%) and the setting times and compressive strengths at different curing times measured. In addition to decomposition of CaCO(3) to CaO, thermal treatment increases the content of gehlenite (Ca(2)Al(2)SiO(7)), wollastonite (CaSiO(3)) and mayenite (Ca(12)Al(14)O(33)). Thermally treated samples were significantly more reactive than milled IBA and heating to 700 degrees C produced a material which rapidly set. Silica, gehlenite and wollastonite were the main crystalline phases present in hydrated samples and a mixed sulphate-carbonate AFm-type phase (Ca(4)Al(2)O(6)(CO(3))(0.67)(SO(3))(0.33).11H(2)O) formed. Significant volumes of gas were generated during curing and this produced a macro-porous microstructure that limited strength to 2.8MPa. The new materials may have potential for use as controlled low-strength materials.     

Baseline concentrations and spatial distribution of trace metals in surface soils of Guangdong province, China

A total of 260 surface soil samples were collected to investigate the spatial distribution of trace metals in Guangdong province, one of the fast developing regions in China. The results show that the upper baseline concentrations of Cu, Pb, Zn, Cd, Ni, Cr, and Hg were 28.7, 57.6, 77.8, 0.13, 23.5, 87.0, and 0.15 mg kg(-1), respectively. Regional parent materials and pedogenesis are the primary factors influencing the concentrations of trace metals, and various anthropogenic activities are the second most important factors. The spatial distribution of trace metals is correlated to the geological characters with high concentrations of trace metals always located in regional fault areas, basins, and the Pearl River Delta alluvial plain and to the low concentrations associated with the other areas in Guangdong province.     

Removal of organic compounds during treating printing and dyeing wastewater of different process units

Wastewater in Shaoxing wastewater treatment plant (SWWTP) is composed of more than 90% dyeing and printing wastewater with high pH and sulfate. Through a combination process of anaerobic acidogenic [hydraulic retention time (HRT) of 15h], aerobic (HRT of 20h) and flocculation-precipitation, the total COD removal efficiency was up to 91%. But COD removal efficiency in anaerobic acidogenic unit was only 4%. As a comparison, the COD removal efficiency was up to 35% in the pilot-scale upflow anaerobic sludge bed (UASB) reactor (HRT of 15h). GC-MS analysis showed that the response abundance of these wastewater samples decreased with their removal of COD. A main component of the raw influent was long-chain n-alkanes. The final effluent of SWWTP had only four types of alkanes. After anaerobic unit at SWWTP, the mass percentage of total alkanes to total organic compounds was slightly decreased while its categories increased. But in the UASB, alkanes categories could be removed by 75%. Caffeine as a chemical marker could be detected only in the effluent of the aerobic process. Quantitative analysis was given. These results demonstrated that GC-MS analysis could provide an insight to the measurement of organic compounds removal.     

N-doped SiO2/TiO2 mesoporous nanoparticles with enhanced photocatalytic activity under visible-light irradiation

Mesoporous nanocrystalline N-doped SiO2/TiO2 visible-light photocatalysts were prepared by treating SiO2/TiO2 xerogels in a flow of nitrogen gas bubbled through concentrated ammonia solution. Structural characterization and performance analysis results revealed that the addition of SiO2 remarkably altered the phase composition, specific surface area, microstructure, as well as the photocatalytic activity of N-doped TiO2. The presence of SiO2 in N-doped TiO2 particles suppressed the formation of rutile phase and the crystal growth of N-doped TiO2 particles during thermal calcinations. When weight ratio of SiO2/TiO2 was in 0.05-0.20, the N-doped SiO2/TiO2 exhibited higher photocatalytic activity than the N-doped TiO2, and optimum ratio was found to be 0.05. The enhanced photocatalytic activity could be attributed to the higher specific area, larger pore volume, and more surface hydroxyl groups in the catalyst.     

Trace element mobility in soils seven years after the Aznalcóllar mine spill

The long-term influence of the Aznalcóllar mine spill on soils was studied seven years after the accident in the area of Vado del Quema. Soils where the pyritic sludge was not removed after the cleaning operations and soils where this process was accomplished successfully were sampled and studied in detail. Sludge and soil horizons were characterised, determining their physico-chemical parameters, mineralogy and the total concentrations of major and trace elements. Moreover, leaching studies were performed using batch tests. The main mineralogical changes detected in the soil beneath the weathered sludge are the neo-formation of jarosite, gypsum and sainfeldite, together with the almost total depletion of calcite. An important acidification of soil has been also produced, especially in the uppermost soil layers. These two factors show to be the main responsible for the vertical distribution and leachability displayed by trace elements. Critical total concentrations were found for most trace elements in the soil still affected by the sludge weathering. Furthermore, the Cd and Zn leachable contents showed to be extremely high. Therefore, in those areas affected by the mine spill where the removal of sludge was not accomplished properly, special care should be paid to trace elements highly mobile in acidic conditions. Additional restoration measures should be undertaken to avoid further pollutant dispersion.     

Review of the complexation of tetravalent actinides by ISA and gluconate under alkaline to hyperalkaline conditions

Isosaccharinic (ISA) and gluconic acids (GLU) are polyhydroxy carboxylic compounds showing a high affinity to metal complexation. Both organic ligands are expected in the cementitious environments usually considered for the disposal of low- and intermediate-level radioactive wastes. The hyperalkaline conditions imposed by cementitious materials contribute to the formation of ISA through cellulose degradation, whereas GLU is commonly used as a concrete additive. Despite the high stability attributed to ISA/GLU complexes of tetravalent actinides, the number and reliability of available experimental studies is still limited. This work aims at providing a general and comprehensive overview of the state of the art regarding Th, U(IV), Np(IV), and Pu(IV) complexes with ISA and GLU.In the presence of ISA/GLU concentrations in the range 10^− 5–10^− 2 M and absence of calcium, An(IV)(OH)_x(L)_y complexes (An(IV) = Th, U(IV), Np(IV), Pu(IV); L = ISA, GLU) are expected to dominate the aqueous speciation of tetravalent actinides in the alkaline pH range. There is a moderate agreement among their stability, although the stoichiometry of certain An(IV)-GLU complexes is still ill-defined. Under hyperalkaline conditions and presence of calcium, the species CaTh(OH)₄(L)₂(aq) has been described for both ISA and GLU, and similar complexes may be expected to form with other tetravalent actinides.In the present work, the available thermodynamic data for An(IV)–ISA/GLU complexes have been reviewed and re-calculated to ensure the internal consistency of the stability constants assessed. Further modelling exercises, estimations based on Linear Free-Energy Relationships (LFER) among tetravalent actinides, as well as direct analogies between ISA and GLU complexes have also been performed. This approach has led to the definition of a speciation scheme for the complexes of Th, U(IV), Np(IV) and Pu(IV) with ISA and GLU forming in alkaline to hyperalkaline pH conditions, both in the absence and presence of calcium.