连锁控制的A2/O-MBR工艺处理石化社区生活污水

采用连锁控制的A2/O-MBR工艺处理石化社区低浓度的生活污水并回用,处理规模520 m3/h。工程运行监测结果表明,该工艺对低浓度生活污水处理效果良好,出水水质达到了《城镇污水处理厂污染物排放标准》(GB18918-2002)的一级B标准和《污水再生利用工程设计规范》(GB50335-2002)标准要求。通过连锁控制,系统运行稳定,具有较强的耐冲击负荷能力,实现了污水处理厂正常运行。     

Ceramic tiles with black pigment made from stainless steel plant dust: Physical properties and long-term leaching behavior of heavy metals

Stainless steel plant dust is a hazardous by-product of the stainless steelmaking industry. It contains large amounts of Fe, Cr, and Ni, and can be potentially recycled as a raw material of inorganic black pigment in the ceramic industry to reduce environmental contamination and produce value-added products. In this paper, ceramic tiles prepared with black pigment through recycling of stainless steel plant dust were characterized in terms of physical properties, such as bulk density, water absorption, apparent porosity, and volume shrinkage ratio, as well as the long-term leaching behavior of heavy metals (Cr, Ni, Pb, Cd, and Zn). The results show that good physical properties of ceramic tiles can be obtained with 8% pigments addition, sample preparation pressure of 25 MPa, and sintering at 1200 ºC for 30 min. The major controlling leaching mechanism for Cr and Pb from the ceramic tiles is initial surface wash-off, while the leaching behavior of Cd, Ni, and Zn from the stabilized product is mainly controlled by matrix diffusion. The reutilization process is safe and effective to immobilize the heavy metals in the stainless steel plant dust.

Implications: Stainless steel plant dust is considered as a hazardous material, and it can be potentially recycled for black pigment preparation in the ceramic industry. This paper provides the characteristics of the ceramic tiles with black pigment through recycling stainless steel plant dust, and the long-term leaching behavior and controlling leaching mechanisms of heavy metals from the ceramic tile. The effectiveness of the treatment process is also evaluated.     

广西龙江底栖硅藻水质生物监测方法

2013年9月份龙江流域设20个采样点,综合采用硅藻多样指数法、硅藻指数法、硅藻生态类群评价法以及理化指标验证法,结合GIS技术对龙江水质进行评价,并提出了基于硅藻指数的水质比较评价的DIR法。结果表明,9月份,龙江流域水质总体处于中偏好水质标准;河流水体上游水质好于下游,支流好于干流;其中,下板六水电站、环江水文站、刘三姐乡、下江坝村、安马乡水质很好,而三岔镇、拉浪乡和大湾村水体水质很差。发现多样性指数法不适合龙江水质的评价,各种评价方法各有特点,为了研究的科学性和实用性,各种水质评价方法的联合采用是必要的。     

TiO2光催化耦合SO4-·体系对硝基苯酚的降解性能及动力学

利用溶胶-凝胶法在改性的ZSM-5分子筛上负载TiO2制备复合光催化剂TiO2/ZSM-5m,采用扫描电镜、N2吸附-脱附等温线和X射线衍射对材料进行表征。通过耦合Fe2+/S2O82-产硫酸根自由基SO4-·体系,以对硝基苯酚(pNP)为目标污染物,系统考察了初始pH、TiO2/ZSM-5m投加量、FeSO4、Na2S2O8浓度和初始浓度对pNP降解性能的影响。结果表明,在TiO2/ZSM-5m投加量为0.8 g/L,pH为4.0,FeSO4为0.4 g/L,Na2S2O8为2.4 g/L,常温下反应240 min的优化条件下,对pNP(初始浓度50 mg/L)去除率达到99.31%,光催化降解动力学符合Langmuir-Hinshelwood模型,UV-vis图谱推测对硝基苯酚分子结构发生改变,被有效降解。     

Nutrient leaching in extensive green roof substrate layers with different configurations

Environmental Science and Pollution Research - Due to substrate layers with different substrate configurations, extensive green roofs (EGRs) exhibit different rainfall runoff retention and...     

杭州城市大气消光系数和能见度的影响因子研究

为了解杭州市能见度下降与大气污染之间的关系，在2001年5月至2002年5月对不同粒径的颗粒物（PM10、PM2.5）的质量浓度进行了观测，结合晴天天气条件下的大气能见度，推算污染物和水汽分子对大气的消光散射，发现细微颗粒物的散射消光特性对杭州市能见度下降起主要作用，并得到能见度与细微颗粒物浓度比值（PM2．5／PM10）的关系；分析了大气能见度和消光系数与PM2．5／PM10和相对湿度的相关系数。     

Ultrasound enhanced heterogeneous activation of peroxydisulfate by bimetallic Fe-Co/GAC catalyst for the degradation of Acid Orange 7 in water

Bimetallic Fe-Co/GAC （granular activated carbon） was prepared and used as heterogeneous catalyst in the ultrasound enhanced heterogeneous activation of peroxydisulfate （PS, S2O8 2-） process. The effect of initial pH, PS concentration, catalyst addition and stirring rate on the decolorization of Acid Orange 7 （AO7） was investigated. The results showed that the decolorization efficiency increased with an increase in PS concentration from 0.3 to 0.5 g/L and an increase in catalyst amount from 0.5 to 0.8 g/L. But further increase in PS concentration and catalyst addition would result in an unpronounced increase in decolorization efficiency. In the range of 300 to 900 r/min, stirring rate had little effect on AO7 decolorization. The catalyst stability was evaluated by measuring decolorization efficiency for four successive cycles.     

Pressure-assisted chelation extraction of lead from contaminated soil

Soil contamination by metallic elements including lead occurs frequently. Contaminant metals in soil pose a serious risk to public health and groundwater supplies. Extraction using chelants is seen as a remediation option; however, it is often hampered by access to the contaminants that are shielded by the soil matrix. We have developed a novel extraction technique that utilizes a mildly elevated pressure in consecutive cycles of compression and decompression along with a chelating agent for the soil slurry. Complete extraction of 3300 mg/kg of Pb from soil was achieved by 100 mM of EDTA (ethylenediaminetetraacetic acid) in 10 min using 20 pressure cycles at 150 psi (10 atm). Extraction was studied according to pressure, number of pressure cycles, chelant concentration, solid content, pH, agitation, and use of consecutive washings. Heightened extraction is attributed to fracturing of the soil particles that leads to enhanced contaminant exposure to the chelating agent.     

Dynamic changes in functional gene copy numbers and microbial communities during degradation of pyrene in soils

This study investigates the dynamics of pyrene degradation rates, microbial communities, and functional gene copy numbers during the incubation of pyrene-spiked soils. Spiking pyrene to the soil was found to have negligible effects on the bacterial community present. Our results demonstrated that there was a significant difference in nidA gene copy numbers between sampling dates in QZ soil. Mycobacterium 16S rDNA clone libraries showed that more than 90% mycobacteria detected were closely related to fast-growing PAH-degrading Mycobacterium in pyrene-spiked soil, while other sequences related to slow-growing Mycobacterium were only detected in the control soil. It is suggested that nidA gene copy number and fast-growing PAH-degrading Mycobacterium could be used as indicators to predict pyrene contamination and its degradation activity in soils.     

各种影响因子对电解法预处理医药废水的影响研究

探讨了电解法预处理医药废水时停留时间、电解电压、废水初始浓度、温度和废水pH值等影响因子对去除色度、COD和提高废水可生化性等处理效果的影响,并考察了其应用于工业实际废水处理的可行性.实验结果表明:电解法更适合高浓度医药废水的处理,色度的去除率可达到90%以上;电解时间宜控制在40～60 min;电解电压越高,废水COD和色度去除效果越好;在实验温度范围内,温度对色度和COD去除率的影响不大;废水pH值为7.5时电解效果最佳,工程运用宜控制在6～9之间.