火电站污水处理厂最佳投药量优化试验研究

火电厂污水水质和水量变化较大,絮凝剂和助凝剂投药量准确与否决定去除效率和运行成本,本研究针对火电厂实际运行情况,通过静态和动态实验,比较去除效率。根据水质和水量的变化,找到最佳投药量,为污水处理厂的最佳运行提供了参考依据。     

白腐菌应用于堆肥处理含木质素废物的研究

白腐菌对木质素具有较强的降解能力。通过在含大量木质素的模拟垃圾堆肥中采取添加白腐菌菌剂与不添加该菌剂2组实验对比,在相同堆肥处理条件下,接种菌剂的堆肥中木质素总量由274988mg降至15438mg,降解率达4386%,远高于未接种菌剂的堆肥中木质素的降解率,表明白腐菌可有效用于含木质素废弃物的堆肥处理,并有望于加速堆肥腐熟,提高堆肥效率。     

餐厨垃圾暗-光耦联发酵制氢研究

文章以餐厨垃圾为底物进行暗-光耦联发酵两步法制氢研究.探讨物料比、起始pH对暗发酵产氢的影响;温度、起始pH对光合发酵产氢的影响,得到如下结论.在暗发酵阶段,以餐厨垃圾为底物,在合适条件下产氢量可达25.18 mL/gVS.在光合发酵阶段,以暗发酵液为底物,在合适条件下产氢量可达34.62 mL/gVS.以餐厨垃圾为底物,两步联合制氢可达59.80 mL/gVS,为仅暗发酵产氢量的2.37倍.     

萍乡市土壤中重金属离子含量、空间分布及其变化趋势研究

以江西省萍乡地区土壤为研究对象,分析研究了萍乡市土壤中重金属离子的含量及空间分布特征,并初步估算了重金属离子累积现速率和加速度.结果表明:萍乡市土壤整体环境质量较好,但随着社会经济的快速发展,工农业生产等人为活动对土壤的影响越来越大.从空间分布来看,在全市5个县区布置的52个采样点中,共有24个测点的重金属离子含量超标.其中上栗县有10个测点的重金属离子含量超标,明显多于其他县区,出现了与其他县区不同的污染特征.     

固定化微生物脱氮技术

在废水生物脱氮中 ,利用载体固定、形成颗粒污泥等固定化微生物技术可在增加生物脱氮速度、节省碳源、减少后曝气等方面提供有效的方法 ,并实现单级生物脱氮     

基于可调二极管激光技术的汽车尾气遥感监测系统

汽车尾气排放已成为最主要的城市污染源之一。汽车尾气的遥感监测系统作为一种高效实时监测汽车正常运行状况下的尾气排放方法已越来越受到人们的广泛关注。本文主要介绍基于可调二极管激光(TDL)技术的汽车尾气遥感监测系统。首先介绍遥感监测系统的产生与发展以及TDL技术的基本原理,其次阐述遥感监测系统的组成、关键技术以及系统的优点,并分析遥感监测系统在国内外的应用现状,最后提出目前应用中尚待解决的若干关键技术问题。     

微生物絮凝剂与聚合氯化铝复配处理涂料废水的响应面优化

采用响应面分析法对聚合氯化铝(PAC)与污泥生产的微生物絮凝剂复配处理涂料废水的过程进行了优化,设定的响应值为COD和色度去除率。实验分别拟合了关于COD去除率和色度去除率的二次模型,根据响应值的分布情况,确定涂料废水的最佳絮凝条件为微生物絮凝剂浓度47 mg/L,PAC浓度39 mg/L,pH为8.2,CaCl2浓度0.38 g/L,搅拌速度210 r/min。最佳絮凝条件下,微生物絮凝剂对涂料废水中COD和色度的去除率分别达到77.6%和68.9%。     

Changes of organic acid exudation and rhizosphere pH in rice plants under chromium stress.

The effect of chromium (Cr) stress on the changes of rhizosphere pH, organic acid exudation, and Cr accumulation in plants was studied using two rice genotypes differing in grain Cr accumulation. The results showed that rhizosphere pH increased with increasing level of Cr in the culture solution and with an extended time of Cr exposure. Among the six organic acids examined in this experiment, oxalic and malic acid contents were relatively higher, and had a significant positive correlation with the rhizosphere pH, indicating that they play an important role in changing rhizosphere pH. The Cr content in roots was significantly higher than that in stems and leaves. Cr accumulation in plants was significantly and positively correlated with rhizosphere pH, and the exudation of oxalic, malic and citric acids, suggesting that an increase in rhizosphere pH, and exudation of oxalic, malic and citric acid enhances Cr accumulation in rice plants.     

A review of gas-phase chemical mechanisms commonly used in atmospheric chemistry modelling

The atmospheric chemical mechanism is an essential component of airshed models used for investigating the chemical behaviors and impacts of species. Since the first tropospheric chemical mechanism was proposed in the 1960s, various mechanisms including Master Chemical Mechanism (MCM), Carbon Bond Mechanism (CBM), Statewide Air Pollution Research Center (SAPRC) and Regional Atmospheric Chemistry Mechanism (RACM) have been developed for different research purposes. This work summarizes the development and applications of these mechanisms, introduces their compositions and lumping methods, and compares the ways the mechanisms treat radicals with box model simulations. CBM can reproduce urban pollution events with relatively low cost compared to SAPRC and RACM, whereas the chemical behaviors of radicals and the photochemical production of ozone are described in detail in RACM. The photolysis rates of some oxygenated compounds are low in SAPRC07, which may result in underestimation of radical levels. As an explicit chemical mechanism, MCM describes the chemical processes of primary pollutants and their oxidation products in detail. MCM can be used to investigate certain chemical processes; however, due to its large size, it is rarely used in regional model simulations. A box model case study showed that the chemical behavior of OH and HO₂ radicals and the production of ozone were well described by all mechanisms. CBM and SAPRC underestimated the radical levels for different chemical treatments, leading to low ozone production values in both cases. MCM and RACM are widely used in box model studies, while CBM and SAPRC are often selected in regional simulations.     

酸胁迫对铜藻早期生长阶段的影响

为探究低pH胁迫对大型藻类早期生长的影响,以铜藻 Sargassum horneri 为研究对象,设置pH=3.5、4.5、5.5、6.5处理组和自然海水对照组,以不同处理时间分别对铜藻孢子和幼体进行胁迫实验。孢子实验中,于铜藻孢子附着前、后对其进行15、30、60、120 min的酸胁迫,以附着率和脱落率表征低pH对孢子附着的影响;幼体实验中,持续将铜藻幼体暴露于酸性条件下,以脱落死亡率表征pH对幼体的致死效应。结果显示,在短时间酸胁迫下,酸度对铜藻孢子附着的影响显著,附着率随pH值的下降而降低;胁迫时间对孢子的附着影响显著,附着率随胁迫时间的延长而降低,pH值与胁迫时间无交互作用;而当孢子已充分附着后,短期酸胁迫并没有显著影响孢子体的存活。在长时间酸胁迫下,与对照组相比,所有处理组铜藻幼体的存活率均显著降低。研究表明,低pH会对铜藻孢子、幼体的存活生长产生不利影响,并且这种影响在铜藻早期发育的不同阶段有所不同。