Mechanisms of electron acceptor utilization: implications for simulating anaerobic biodegradation

Simulation of biodegradation reactions within a reactive transport framework requires information on mechanisms of terminal electron acceptor processes (TEAPs). In initial modeling efforts, TEAPs were approximated as occurring sequentially, with the highest energy-yielding electron acceptors (e.g. oxygen) consumed before those that yield less energy (e.g., sulfate). Within this framework in a steady state plume, sequential electron acceptor utilization would theoretically produce methane at an organic-rich source and Fe(II) further downgradient, resulting in a limited zone of Fe(II) and methane overlap. However, contaminant plumes often display much more extensive zones of overlapping Fe(II) and methane. The extensive overlap could be caused by several abiotic and biotic processes including vertical mixing of byproducts in long-screened monitoring wells, adsorption of Fe(II) onto aquifer solids, or microscale heterogeneity in Fe(III) concentrations. Alternatively, the overlap could be due to simultaneous utilization of terminal electron acceptors. Because biodegradation rates are controlled by TEAPs, evaluating the mechanisms of electron acceptor utilization is critical for improving prediction of contaminant mass losses due to biodegradation. Using BioRedox-MT3DMS, a three-dimensional, multi-species reactive transport code, we simulated the current configurations of a BTEX plume and TEAP zones at a petroleum-contaminated field site in Wisconsin. Simulation results suggest that BTEX mass loss due to biodegradation is greatest under oxygen-reducing conditions, with smaller but similar contributions to mass loss from biodegradation under Fe(III)-reducing, sulfate-reducing, and methanogenic conditions. Results of sensitivity calculations document that BTEX losses due to biodegradation are most sensitive to the age of the plume, while the shape of the BTEX plume is most sensitive to effective porosity and rate constants for biodegradation under Fe(III)-reducing and methanogenic conditions. Using this transport model, we had limited success in simulating overlap of redox products using reasonable ranges of parameters within a strictly sequential electron acceptor utilization framework. Simulation results indicate that overlap of redox products cannot be accurately simulated using the constructed model, suggesting either that Fe(III) reduction and methanogenesis are occurring simultaneously in the source area, or that heterogeneities in Fe(III) concentration and/or mineral type cause the observed overlap. Additional field, experimental, and modeling studies will be needed to address these questions.     

Trends in ambient concentrations of agrochemicals in humans and the environment of the United States

Uses of pesticides and related agrochemicals have been regulated in the United States since 1948. The United States government has supported human and environmental monitoring for pesticides and selected toxic chemicals for the past 15 yr. The initial ambient monitoring systems were designed to determine average concentrations of pesticides and related chemicals in human and environmental media on a nationwide basis and determine changes in these concentrations over time. The results of these surveys showed that almost all of the general human population and various environmental components contained low concentrations of chlorinated pesticides. As the Environmental Protection Agency (EPA) restricted many uses of the chlorinated pesticides, the organophosphorous and carbamate pesticides which replaced them were not as easily monitored by ambient surveys. Special monitoring studies had to be done more frequently to produce data on these compounds which were not as persistent or accumulative in the environment. Currently, a re-evalution has begun to determine pesticide monitoring data needs for the next 5 to 10 yr, modify existing ambient surveys, and plan needed short-term studies to efficiently meet regulatory data needs. Ambient monitoring for trends in chemical levels in humans and the environment will continue in the United States at a reduced level, and many exposure data needs will be met with use-specific monitoring studies.Presented at the International Conference on Environmental Hazards of Agrochemicals in Developing Countries, 8–12 November, 1983 in Alexandria, Egypt.     

Cross-sectional biomonitoring study of pesticide exposures in Queensland,Australia, using pooled urine samples

A range of pesticides are available in Australia for use in agricultural and domestic settings to control pests, including organophosphate and pyrethroid insecticides, herbicides, and insect repellents, such as N,N-diethyl-meta-toluamide (DEET). The aim of this study was to provide a cost-effective preliminary assessment of background exposure to a range of pesticides among a convenience sample of Australian residents. De-identified urine specimens stratified by age and sex were obtained from a community-based pathology laboratory and pooled (n = 24 pools of 100 specimens). Concentrations of urinary pesticide biomarkers were quantified using solid-phase extraction coupled with isotope dilution high-performance liquid chromatography–tandem mass spectrometry. Geometric mean biomarker concentrations ranged from <0.1 to 36.8 ng/mL for organophosphate insecticides, <0.1 to 5.5 ng/mL for pyrethroid insecticides, and <0.1 to 8.51 ng/mL for all other biomarkers with the exception of the DEET metabolite 3-diethylcarbamoyl benzoic acid (4.23 to 850 ng/mL). We observed no association between age and concentration for most biomarkers measured but noted a “U-shaped” trend for five organophosphate metabolites, with the highest concentrations observed in the youngest and oldest age strata, perhaps related to age-specific differences in behavior or physiology. The fact that concentrations of specific and non-specific metabolites of the organophosphate insecticide chlorpyrifos were higher than reported in USA and Canada may relate to differences in registered applications among countries. Additional biomonitoring programs of the general population and focusing on vulnerable populations would improve the exposure assessment and the monitoring of temporal exposure trends as usage patterns of pesticide products in Australia change over time.     

The Caged Chicken or the Free-Range Egg? The Regulatory and Market Dynamics of Layer-Hen Welfare in the UK,Australia and the USA

Since the 1990s there have been a number of government and market led initiatives to improve the welfare of layer hens in the United Kingdom, Australia and the USA. The focus of these regulatory and market initiatives has been a shift away from the dominant battery-cage system to enriched cages, barn/aviary and free-range production systems. Government regulations have played an important role in setting some minimum welfare standards and the banning of battery cages in the UK and in some US states. However the commodification and market segmentation of higher welfare standards has also seen the growth in production and demand of cage-free and free-range eggs in all three countries. This paper maps and compares the developments in government regulation and market segmentation of layer-hen welfare in the UK, Australia and the USA. The role of labelling and certification in facilitating commodification and market segmentation will be examined, including the public controversies and legal conflicts over egg labelling. The key state, market and civil society actors in each country will also be identified, and their role in driving or resisting higher standards examined, including the increasingly influential role of animal welfare organizations and food corporations.     

Experimental investigation of wellbore integrity and CO2–brine flow along the casing–cement microannulus

Wellbore integrity is one of the key performance criteria in the geological storage of CO₂. It is significant in any proposed storage site but may be critical to the suitability of depleted oil and gas reservoirs that may have 10’s to 1000’s of abandoned wells. Much previous work has focused on Portland cement which is the primary material used to seal wellbore systems. This work has emphasized the potential dissolution of Portland cement. However, an increasing number of field studies (e.g., Carey et al., 2007), experimental studies (e.g., Kutchko et al., 2006) and theoretical considerations indicate that the most significant leakage mechanism is likely to be flow of CO₂ along the casing–cement microannulus, cement–cement fractures, or the cement–caprock interface.In this study, we investigate the casing–cement microannulus through core-flood experiments. The experiments were conducted on a synthetic wellbore system consisting of a 5-cm diameter sample of cement that was cured with an embedded rectangular length of steel casing that had grooves to accommodate fluid flow. The experiments were conducted at 40 $°$ C and 14 MPa pore pressure for 394 h. During the experiment, 6.2 l of a 50:50 mixture of supercritical CO₂ and 30,000 ppm NaCl-rich brine flowed through 10-cm of limestone before flowing through the 6-cm length cement–casing wellbore system. Approximately 59,000 pore volumes of fluid moved through the casing–cement grooves. Scanning electron microscopy revealed that the CO₂–brine mixture impacted both the casing and the cement. The Portland cement was carbonated to depths of 50–250 $\mu$m by a diffusion-dominated process. There was very little evidence for mass loss or erosion of the Portland cement. By contrast, the steel casing reacted to form abundant precipitates of mixed calcium and iron carbonate that lined the channels and in one case almost completely filled a channel. The depth of steel corroded was estimated at 25– $30\mu$m and was similar in value to results obtained with a simplified corrosion model.The experimental results were applied to field observations of carbonated wellbore cement by Carey et al. (2007) and Crow et al. (2009) to show that carbonation of the field samples was not accompanied by significant CO₂–brine flow at the casing–cement interface. The sensitivity of standard-grade steel casing to corrosion suggests that relatively straight-forward wireline logging of external casing corrosion could be used as a useful indicator of flow behind casing. These experiments also reinforce other studies that indicate rates of Portland cement deterioration are slow, even in the high-flux CO₂–brine experiments reported here.     

Limitations of reverse polyethylene samplers (RePES) for evaluating toxicity of field contaminated sediments

Passive samplers are used to measure dissolved nonionic organic contaminants (NOCs) in environmental media. More recently, reverse polyethylene samplers (RePES) have been used with spiked sediments to recreate interstitial water exposure concentrations and observed toxicity. In the present study, RePES were used with field contaminated sediments. The RePES was not capable of recreating the pattern of toxicity with the amphipod and mysid observed with intact field sediments. Decreased survival in the RePES exposures as compared to the whole sediment exposures was most likely caused by an overexposure to NOCs due to a lack of surrogate black carbon in the RePES system. As an alternative, aqueous phase studies were performed in which polyethylene was allowed to equilibrate with slurries of intact sediments for 3 weeks. Three weeks was found to be an insufficient amount of time for the polyethylene to equilibrate with the sediment. An additional study demonstrated 3 months was sufficient for lower contaminant concentrations, but might not be an adequate amount of time for more highly contaminated sediments. The aqueous phase transfer approach may be useful if equilibration is sufficiently long, although this length of time may be impractical for use in certain applications, such as toxicity identification evaluations (TIEs).     

Production of lightweight aggregate from industrial waste and carbon dioxide

The concomitant recycling of waste and carbon dioxide emissions is the subject of developing technology designed to close the industrial process loop and facilitate the bulk-re-use of waste in, for example, construction. The present work discusses a treatment step that employs accelerated carbonation to convert gaseous carbon dioxide into solid calcium carbonate through a reaction with industrial thermal residues. Treatment by accelerated carbonation enabled a synthetic aggregate to be made from thermal residues and waste quarry fines. The aggregates produced had a bulk density below 1000 kg/m³ and a high water absorption capacity. Aggregate crushing strengths were between 30% and 90% stronger than the proprietary lightweight expanded clay aggregate available in the UK. Cast concrete blocks containing the carbonated aggregate achieve compressive strengths of 24 MPa, making them suitable for use with concrete exposed to non-aggressive service environments. The energy intensive firing and sintering processes traditionally required to produce lightweight aggregates can now be augmented by a cold-bonding, low energy method that contributes to the reduction of green house gases to the atmosphere.     

Survey of arsenic and its speciation in rice products such as breakfast cereals, rice crackers and Japanese rice condiments

Rice has been demonstrated to be one of the major contributors to arsenic (As) in human diets in addition to drinking water, but little is known about rice products as an additional source of As exposure. Rice products were analyzed for total As and a subset of samples were measured for arsenic speciation using high performance liquid chromatography interfaced with inductively coupled plasma-mass spectrometry (HPLC-ICP-MS). A wide range of rice products had total and inorganic arsenic levels that typified those found in rice grain including, crisped rice, puffed rice, rice crackers, rice noodles and a range of Japanese rice condiments as well as rice products targeted at the macrobiotic, vegan, lactose intolerant and gluten intolerance food market. Most As in rice products are inorganic As (75.2-90.1%). This study provides a wider appreciation of how inorganic arsenic derived from rice products enters the human diet.     

夏季长三角地区臭氧非线性响应曲面模型的建立及应用

2013年8月上旬,长三角地区发生了一次大范围高浓度臭氧污染事件.本研究基于WRF-CMAQ空气质量模型系统,结合长三角地区大气污染物排放清单,构建了臭氧与其前体物之间的非线性响应曲面模型(Response surface modeling,RSM).基于RSM探讨了长三角地区O_3化学的敏感性特征,分析了上海市O_3的来源并预测不同情景下O_3的变化,提出O_3污染的最优控制方案.研究结果表明,长三角地区夏季O3主控因素区域差别较大,上海环科院、杭州卧龙桥、南京玄武湖等城区点位属于VOC控制型;徐州铜山、合肥肥西、丽水青田等郊区属于NOx控制型.O_3的敏感性特征在不同浓度水平下也呈现较大差异,随着O_3浓度水平的升高,各地区NOx敏感性均有所增加.从区域来源来看,远距离传输对平日上海O_3贡献较大,占50%以上;而在O_3污染日,本地及区域贡献为72.1%,而远距离传输贡献下降至27.9%.快速预测了110组减排情景,表明在本地及区域前体物均减排70%的情况下,2013年8月上海O_3浓度能完全达标.