Relationships between runoff and land degradation on non-cultivated land in the Middle Hills of Nepal

SUMMARY

Rainfall-surface water runoff relationships have been examined for 912 rainfall events during the 1992 and 1993 monsoon seasons on 15 erosion plots on a variety of non-cultivated land uses in the Middle Hills, Nepal. Vegetation cover and type examined ranged from grassland and relatively undisturbed mixed broadleaf forest to subtropical Sal forest, in various states of degradation, and bare ground. Runoff was frequently generated on most plots and often by relatively small rainfall amounts (less than 5 mm) and low rainfall intensities (3 mm/h). Ground cover and canopy cover were significant factors in determining amounts of runoff. Runoff coefficients ranged from 1–2% under grassland and mixed broadleaf forest to 57–64% on the bare sites. Coefficients for Sal forest were between these two extremes; specific values depended on the level of degradation induced by human activity. The most degraded forest sites experienced runoff coefficients of 33%. Ground cover beneath the trees, especially leaf litter, was more effective in reducing runoff than the amount of canopy cover. Canopy cover was more effective during the less intense storms but was ineffective when the rainfall intensity was high. The results suggest that a minimum ground cover of 60% will keep runoff to within 10% of total rainfall amounts for most normal monsoons in the Middle Hills. This will also reduce the risk of gullying and surface soil erosion. It is the nature of the forest that is important and not its total area. In the study area, although the total area under forest had not changed, some of the forest had become more degraded with a corresponding increase in mean runoff rates. Increased runoff can occur even if the area under forest increases. Estimates of levels of degradation based solely on changing forest areas are likely to be inaccurate.     

Urban fuelwood demand and markets in a small town in South Africa: Livelihood vulnerability and alien plant control

Fuelwood is the primary energy for most households throughout the developing world. With increasing urbanization and declining local availability of fuelwood, a growing proportion of households obtain their fuelwood by purchasing it. These fuelwood markets are the key nexus in supply and demand scenarios and can be potentially significant points for intervention to address energy security amongst the urban poor. This paper reports on the fuelwood demand and marketing in a small town in South Africa. Despite the availability of more modern fuels and state subsidization of electricity, fuelwood was still used by half the households. Annual demand was 1.2 t per household. Over half of the households bought their fuelwood requirements because local stocks were limited. Those households that did collect their own fuelwood were significantly poorer than households that purchased fuelwood, as well as households that did not use fuelwood at all. Fuelwood markets operated through 45-60 vendors who transported fuelwood from further afield. Income from the fuelwood trade was low, but was strongly linked to hours worked. Thus, vendors working a full week did earn a meaningful income, especially in the context of high unemployment in the area. Fuelwood vendors also provided casual employment opportunities for unskilled labour. Most vendors harvested fuelwood from commonage lands, with most of the wood being from alien species. Local stocks of wood are declining in the face of constant transformation of commonage to residential areas, and a national water and biodiversity conservation programme to eradicate alien plants. This decline poses a threat to the financial viability of fuelwood markets. Yet, an opportunity exists to incorporate the vendors into the alien plant clearing programme, since they already perform such a function.     

Benefits and challenges of streamlined life-cycle assessment for SMEs – findings from case studies on climate change impacts

ABSTRACT

Small and medium-sized enterprises (SMEs) have a substantial role in the economy and job creation, but they are a remarkable source of environmental impacts. SMEs often lack skills and resources to compile environmental impact assessments; Streamlined Life Cycle Analysis (LCA) can provide efficient tools for this. An application of streamlined LCA relying heavily on database data, LCA clinic, was developed and tested on 23 SMEs in Finland. The climate change impacts were mainly caused by the production of raw materials, electricity and heating, whereas packaging and transportation were not influential. A significant amount of emissions were indirect, i.e. caused by production of raw materials. Thus, decreasing emissions from raw material production or selecting raw materials with a smaller environmental load could be a more efficient way to decrease emissions than reducing direct emissions such as those from electricity use. Lack of data in the LCA-databases was considered a challenge. An access to regionally customised datasets is important for the implementation of LCA clinics. Company feedback indicated that LCA clinics were useful in climate-friendly product design and increased environmental awareness, but did not lead to immediate actions to reduce emissions because of inadequate investment capabilities. Company managers had limited possibilities to use the results in marketing as comparative assessments would require a full LCA. Many company managers were willing to pay a fee sufficient to cover the costs of an LCA clinic, but some considered that the costs should be covered by external funding sources.     

Sustainability in manufacturing processes: practices performed in metal forming,casting, heat treatment,welding and electrostatic painting

ABSTRACT

This article aims to list the main sustainable practices developed in the processes of metal forming, casting, heat treatment, welding and electrostatic painting. When analysed the literature about sustainable manufacturing, a predominance of studies about machining is observed and the processes mentioned are few explored in academic studies. The research strategy used to reach the objective was systematic literature review, conducted for each process cited. Many sustainable practices were identified with prominence of better materials use and energy efficiency. The authors of this article believe that the information presented here can be useful for researches in their future studies and for industry professionals interested in improving manufacturing processes.     

Trophic transfer of polybrominated diphenyl ethers and polychlorinated biphenyls in a tidal freshwater marsh

The John Heinz National Wildlife Refuge (NWR) at Tinicum Marsh contains one of the last remaining tidal freshwater marsh communities along the Pennsylvania side of the Delaware River Estuary. The marsh receives a significant load of nutrients and sediment-associated contaminants and is hypothesised to act as an effective trap for these chemicals. The goal of this study was to quantify the levels of polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) at various trophic levels at two sites within Tinicum Marsh and assess the factors important in determining their bioaccumulation and trophic transfer. For both PCBs and PBDEs, lipid variation for all species was a large factor in determining contaminant body burden. Also, concentrations in biota increased with increasing trophic level as determined by nitrogen isotope analysis (δ¹⁵N values) at the downstream site within Tinicum Marsh. This trend was less apparent at the upstream site and may be due to differences in feeding behaviours among species between the two sites and/or differences in carbon and nitrogen sources and recycling. These data are valuable in assisting bioaccumulation/trophic transfer studies and serve as benchmarks to which future PCB and PBDE concentrations will be compared.     

Physicochemical properties of non-living water hyacinth (Eichhornia crassipes) and lesser duckweed (Lemna minor) and their influence on the As(V) adsorption processes

Eichhornia crassipes (Ec) and Lemna minor (Lm) are aquatic plants. They are considered as weeds of the water and approach being a scourge in many parts of the world, choking waterways and hindering transport upon them. At the same time they are known to readily remove heavy metal ions from water. This paper considers the use of non-living plants as novel and inexpensive biosorbent for the removal of As(V) from watersheds. In the first place they were conditioned and characterised to determine their physicochemical and surface properties and in the second place their adsorption properties for As(V) from aqueous solution were evaluated considering the toxicity of this metalloid in the environment. It describes the methodology to prepare the non-living biomasses; the physicochemical characterisation by SEM, XRD, FTIR, TGA analyses and surface characterisation of Ec and Lm by specific surface, hydration kinetic, point of zero charge determination by mass titration, active site density and XPS analysis are described. Both studied biomasses were found to be potential bio-sorbents for arsenic ions from aqueous solution. According to their efficiency to remove arsenic, they can be used in a very low cost metalloid ions removal system.     

Impact of heavy metals on bacterial communities from mangrove soils of the Mahanadi Delta (India)

This study aimed to assess soil nutrient status and heavy metal content and their impact on the predominant soil bacterial communities of mangroves of the Mahanadi Delta. Mangrove soil of the Mahanadi Delta is slightly acidic and the levels of soil nutrients such as carbon, nitrogen, phosphorous and potash vary with season and site. The seasonal average concentrations (μg/g) of various heavy metals were in the range: 14 810–63 370 (Fe), 2.8–32.6 (Cu), 13.4–55.7 (Ni), 1.8–7.9 (Cd), 16.6–54.7 (Pb), 24.4–132.5 (Zn) and 13.3–48.2 (Co). Among the different heavy metals analysed, Co, Cu and Cd were above their permissible limits, as prescribed by Indian Standards (Co=17 μg/g, Cu=30 μ g/g, Cd=3–6 μ g/g), indicating pollution in the mangrove soil. A viable plate count revealed the presence of different groups of bacteria in the mangrove soil, i.e. heterotrophs, free-living N₂ fixers, nitrifyers, denitrifyers, phosphate solubilisers, cellulose degraders and sulfur oxidisers. Principal component analysis performed using multivariate statistical methods showed a positive relationship between soil nutrients and microbial load. Whereas metal content such as Cu, Co and Ni showed a negative impact on some of the studied soil bacteria.     

Some aspects of heavy metals contamination remediation and role of biosurfactants

Contamination by heavy metals is the result of different industrial activities. The presence of heavy metals in soil and water causes serious problems, as these materials are not biodegradable and do contaminate both biological systems and the subsoil. Biological surface-active compounds otherwise known as biosurfactants in general and rhamnolipids biosurfactants in particular have been successfully employed in the remediation of environments contaminated with heavy metal ions. The aim of the present review is to highlight potential applications of these tensioactive compounds for use in environmental heavy metals removal and bioremediation and processes involved.     

Characterization of fulvic acids during olive mill waste composting (Elemental,Thermal and fluorescence analyses)

Elemental analysis, fluorescence spectroscopy and differential scanning calorimetry (DSC) were applied to the study of fulvic acids isolated from different stages during olive mill waste composting. The fulvic extracted acids are characterized by a high nitrogen content and O/C ratio values that may result from the high degree of humification and the synthesis of more condensed humic complexes. This was confirmed by fluorescence spectroscopy in the synchronous-scan mode by the decrease of shoulder intensities at intermediate wavelengths indicating the increase of polycondensation and conjugation of unsaturated structures and the greater uniformity of fluorophores. Fluorescence spectra in the emission, excitation and synchronous modes became simpler with compost maturation. This was confirmed by DSC results which proved the high degree of polycondensation of aromatic nuclei of fulvic acid molecules during olive mill waste composting.