Use of sequential extraction to assess the influence of sewage sludge amendment on metal mobility in Chilean soils

In Chile, the increasing number of plants for the treatment of wastewater has brought about an increase in the generation of sludge. One way of sludge disposal is its application on land; this, however involves some problems, some of them being heavy metal accumulation and the increase in organic matter and other components from sewage sludge which may change the distribution and mobility of heavy metals. The purpose of the present study was to determine the effect of sewage sludge application on the distribution of Cr, Ni, Cu, Zn and Pb in agricultural soils in Chile. Three different soils, two Mollisols and one Alfisol, were sampled from an agricultural area in Central Chile. The soils were treated with sewage sludge at the rates of 0 and 30 ton ha(-1), and were incubated at 25 degrees C for 45 days. Before and after incubation, the soils were sequentially extracted to obtain labile (exchangeable and sodium acetate-soluble), potentially labile (soluble in moderately reducing conditions, K4P2O7-soluble and soluble in reducing conditions) and inert (soluble in strong acid oxidizing conditions) fractions. A two-level factored design was used to assess the effect of sludge application rate, incubation time and their interaction on the mobility of the elements under study. Among the metals determined in the sludge, zinc has the highest concentration. However, with the exception of Ni, the total content of metals was lower than the recommended limit values in sewage sludge as stated by Chilean regulations. Although 23% of zinc in sludge was in more mobile forms, the residual fraction of all metals was the predominant form in soils and sludge. The content of zinc only was significantly increased in two of the soils by sewage sludge application. On the other hand, with the exception of copper, the metals were redistributed in the first four fractions of amended soils. The effect of sludge application rate, incubation time and their interaction depended on the metal or soil type. In most cases an increase in more mobile forms of metals in soils was observed as the final effect.     

SEC-ICP-MS studies for elements binding to different molecular weight fractions of humic substances in compost extract obtained from urban solid waste

In this work, the speciation of elements in compost was studied with emphasis on their binding to humic substances. In order to assess the distribution of As, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, U, Th and Zn among molecular weight fractions of humic substances, the compost extract (extracted by 0.1 mol l(-1) sodium pyrophosphate) was analyzed by size exclusion chromatography coupled on-line with UV-Vis spectrophotometric and ICP-MS detection. Similar chromatograms were obtained for standard humic acid (Fluka) and for compost extract (254 nm, 400 nm) and three size fractions were operationally defined that corresponded to the apparent molecular weight ranges > 15 kDa, 1-15 kDa and < 1 kDa. The percentage of total element content in compost that was leached to the extract ranged from 30% up to 100% for different elements. The elution profiles of Co, Cr, Cu, Ni and Pb (ICP-MS) followed that of humic substances, while for other elements the bulk elution peak matched the retention time observed for the element in the absence of compost extract. Spiking experiments were carried out to confirm elements' binding and to estimate the affinity of individual elements for humic substances derived from compost. The results obtained indicated the following order of decreasing affinity: Cu > Ni > Co > Pb > Cd > (Cr, U, Th) > (As, Mn, Mo, Zn). After standard addition, further binding of Cu, Ni and Co with the two molecular weight fractions of humic substances was observed, indicating that humic substances derived from compost were not saturated with these elements.     

Pilot-scale application of a single-stage hybrid airlift BioCAST bioreactor for treatment of ammonium from nitrite-limited wastewater by a partial nitrification/anammox process

Environmental Science and Pollution Research - This paper presents the treatment of a nitrite-limited wastewater by partial nitrification/anammox process under different dissolved oxygen (DO)...     

Key factors in levels of public satisfaction with urban waste collection in a northern Spain city

Journal of Material Cycles and Waste Management - Levels of public satisfaction among the inhabitants of Burgos with their urban waste collection service are analyzed by comparing satisfaction...     

Variability in the primary emissions and secondary gas and particle formation from vehicles using bioethanol mixtures

Bioethanol for use in vehicles is becoming a substantial part of global energy infrastructure because it is renewable and some emissions are reduced. Carbon monoxide (CO) emissions and total hydrocarbons (THC) are reduced, but there is still controversy regarding emissions of nitrogen oxides (NO_x), aldehydes, and ethanol; this may be a concern because all these compounds are precursors of ozone and secondary organic aerosol (SOA). The amount of emissions depends on the ethanol content, but it also may depend on the engine quality and ethanol origin. Thus, a photochemical chamber was used to study secondary gas and aerosol formation from two flex-fueled vehicles using different ethanol blends in gasoline. One vehicle and the fuel used were made in the United States, and the others were made in Brazil. Primary emissions of THC, CO, carbon dioxide (CO₂), and nonmethane hydrocarbons (NMHC) from both vehicles decreased as the amount of ethanol in gasoline increased. NO_x emissions in the U.S. and Brazilian cars decreased with ethanol content. However, emissions of THC, CO, and NO_x from the Brazilian car were markedly higher than those from the U.S. car, showing high variability between vehicle technologies. In the Brazilian car, formation of secondary nitrogen dioxide (NO₂) and ozone (O₃) was lower for higher ethanol content in the fuel. In the U.S. car, NO₂ and O₃ had a small increase. Secondary particle (particulate matter [PM]) formation in the chamber decreased for both vehicles as the fraction of ethanol in fuel increased, consistent with previous studies. Secondary to primary PM ratios for pure gasoline is 11, also consistent with previous studies. In addition, the time required to form secondary PM is longer for higher ethanol blends. These results indicate that using higher ethanol blends may have a positive impact on air quality.

Implications: The use of bioethanol can significantly reduce petroleum use and greenhouse gas emissions worldwide. Given the extent of its use, it is important to understand its effect on urban pollution. There is a controversy on whether there is a reduction or increase in PM emission when using ethanol blends. Primary emissions of THC, CO, CO₂, NO_x, and NMHC for both cars decreased as the fraction of ethanol in gasoline increased. Using a photochemical chamber, the authors have found a decrease in the formation of secondary particles and the time required to form secondary PM is longer when using higher ethanol blends.     

Determination of pesticides of different chemical classes in drinking water of the state of Santa Catarina (Brazil) using solid-phase microextraction coupled to chromatographic determinations

The evaluation of the concentration of pesticides in drinking water presents a real concern. In this study, a simple and rapid method based on solid-phase microextraction (SPME) followed by gas chromatography–mass spectrometry and electron capture detectors was developed aiming at multiclass determination of 23 pesticides regulated by the Brazilian legislation. The extraction was carried out by direct immersion mode (DI-SPME) using DVB/Car/PDMS fiber coating. In order to improve the extraction efficiency, parameters such as temperature, salting-out effect, and extraction time were optimized. The method was evaluated using drinking water samples spiked with the analytes at different concentrations, and it showed good linearity in the range studied. The values obtained for limits of quantification (LOQ) were below the limits established by Brazilian regulations. Accuracy and precision of the method exhibited satisfactory results, providing relative recoveries from 70 to 123.34% at three spiked levels, and the relative standard deviations ranged from 0.53 to 24.8%. The method was applied in 20 drinking water samples from 13 cities in the State of Santa Catarina, Brazil.

     

Towards adequately framing sustainability goals in research projects: the case of land use studies

Sustainability-oriented undertakings employ a multitude of different definitions and understandings of the term sustainable development. Against this background, the question of which sustainability goals to refer to at project level must be posed. This article discusses this question using the example of research on land use issues. It presents a qualitative in-depth empirical analysis of the underlying sustainability understanding of research projects, and identifies crucial characteristics of the ways researchers deal with the respective normative goals. The notions of sustainable development advanced by such projects featured different foci with respect to the overall meaning of the concept and were influenced by diverse actor and stakeholder perspectives. Further, the identified sustainability conceptions were deliberated on to different extents, and also differed with respect to whether they were explicit or contextualized. Most importantly, the projects differed in how they broached the issue of sustainability goals as part of research. The findings were used to develop a set of guidelines that clarifies how research can be related successfully to the societal vision of sustainable development. The guidelines draw conceptually on general requirements for appropriate sustainability conceptions derived from the Brundtland definition. They offer a tool for reflecting on one’s assumptions with respect to sustainability goals at any stage of research, which is crucial for advancing the seminal field of sustainability science.     

A temporal and spatial monitoring of organotin pollution in a harborside region of Brazil by imposex and ecological quality ratio using <Emphasis Type="Italic">Leucozonia nassa</Emphasis>

This study represents the first use of Leucozonia nassa (Mollusca-Gastropoda) in a program of long-term monitoring. Specimens of L. nassa were collected between 2006 and 2014 and analyzed for the occurrence of imposex in two areas in Southeastern Brazil, one control area and another characterized by the presence of many ports and marinas. Imposex was evaluated in nine sites based on the percentage of females exhibiting imposex (I%), relative penis length index and vas deferens sequence index, classical indices to evaluate tributyltin (TBT) impacts. Moreover, this study uses for the first time in a tropical environment the ecological quality ratio (EQR), an approach to verify the imposex levels as an indicator of the impact by organotin compounds according to the EU Water Framework Directive. The results confirm the occurrence of high levels of imposex in L. nassa with all the indices evaluated. Furthermore, the results also indicate that, despite the international ban, antifouling paints based on TBT are still possibly used in Brazil. In addition, this study shows that L. nassa has the characteristics that make it a suitable bioindicator to monitor TBT pollution, and that the use of the EQR may create important data regarding this problem.     

Structuring complexity for tailoring research contributions to sustainable development: a framework

Research aiming at generating effective contributions to sustainable development faces particular complexity related challenges. This article proposes an analytical framework disentangling and structuring complexity issues with which research for sustainable development is confronted. Based on theoretical conceptions from fields like policy sciences and transdisciplinary research as well as on an in-depth analysis of the concept of sustainable development, three meta-perspectives on research for sustainable development are introduced and elaborated. The first perspective focuses on notions of sustainable development, sorting out the problem of unclear or ambiguous interpretations of the general sustainability objectives in specific contexts. The second perspective introduces a broad conception of the policy process representing the way societal change towards sustainable development is brought about. It supports identifying those academic and non-academic actors and stakeholders that are relevant for coming up with effective knowledge contributions. The third perspective identifies different forms of knowledge that are needed to tackle sustainability problems as well as the significance of their mutual interrelations. How the framework perspectives support reflecting on the fundamental complexity issues research for sustainable development is confronted with is illustrated using a case example from natural scientific research in the field of land use. We argue that meeting the complexity inherent in the concept of sustainable development requires joint learning in policy processes, working out shared visions being in line with the core objectives of sustainable development and generating knowledge about empirical, normative and pragmatic aspects.     

Chlorpyrifos degradation in a biomixture of biobed at different maturity stages

The biomixture is a principal element controlling the degradation efficacy of the biobed. The maturity of the biomixture used in the biobed affects its overall performance of the biobed, but this is not well studied yet. The aim of this research was to evaluate the effect of using a typical composition of Swedish biomixture at different maturity stages on the degradation of chlorpyrifos. Tests were made using biomixture at three maturity stages: 0 d (BC0), 15 d (BC15) and 30 d (BC30); chlorpyrifos was added to the biobeds at final concentration of 200, 320 and 480 mg kg⁻¹. Chlorpyrifos degradation in the biomixture was monitored over time. Formation of TCP (3,5,6-trichloro-2-pyrinidol) was also quantified, and hydrolytic and phenoloxidase activities measured. The biomixture efficiently degraded chlorpyrifos (degradation efficiency >50%) in all the evaluated maturity stages. However, chlorpyrifos degradation decreased with increasing concentrations of the pesticide. TCP formation occurred in all biomixtures, but a major accumulation was observed in BC30. Significant differences were found in both phenoloxidase and hydrolytic activities in the three maturity stages of biomixture evaluated. Also, these two biological activities were affected by the increase in pesticide concentration. In conclusion, our results demonstrated that chlorpyrifos can be degraded efficiently in all the evaluated maturity stages.