Assessment of mining activities on tree species and diversity in hilltop mining areas using Hyperion and Landsat data

Environmental Science and Pollution Research - The tree species and its diversity are two critical components to be monitored for sustainable management of forest as well as biodiversity...     

Impact of dust storm on phytoplankton bloom over the Arabian Sea: a case study during March 2012

Environmental Science and Pollution Research - Dust storms affect the primary productivity of the ocean by providing necessary micronutrients to the surface layer. One such dust storm during March...     

Visible light driven instantaneous photocatalytic degradation of aniline blue (AB) and methyl violet (MV) by strontium ferrite nanoparticles

Toxic organic dyes released into aquatic sources as a result of industrial activities pose a significant threat to the environment. The removal of such dyes from water sources is a challenging task in the context of environmental emergencies. In this present effort, the strontium ferrite nanoparticles were synthesized by coprecipitation followed by a calcination method and is applied for photocatalytic degradation of such organic dyes. The ferrite nanoparticles were characterized by FTIR, XRD, VSM, SEM-EDX, TEM, and HR-TEM studies. In the existence of H₂O₂ under visible light, the catalyst performs efficient degradation of aniline blue (AB) and methyl violet (MV) dyes in a remarkably short interval of time. The superparamagnetic performance of the catalyst was confirmed by VSM, and thus it can be easily recovered from the degraded dye by applying an external magnet. The Fenton mechanism justifies the elevated rate of photo degradation, which generates hydroxyl and perhydroxyl radicals in the progress of the reaction.     

Uptake and accumulation of potentially toxic metals (Zn, Cu and Pb) in soils and plants of Durgapur industrial belt

Uptake and accumulation of metals in crops may cause possible health risks through food chain. A field survey was conducted to investigate the accumulation of potentially toxic metals contamination in soil and plants irrigated with complexed industrial effluents. Concentration of Zn, Cu and Pb was 205-255,101-130,118-177 microg g(-1) in rhizosphere soils and 116-223, 57-102 and 63-95 microg g(-1) d. wt. in root and 95-186, 44-75 and 27-58 microg g(-1) d. wt. in shoot, respectively. The trend in Cu and Pb was in the order: soil > root > shoot > seed while in Zn it was soil > root > seed > shoot. Roots accumulated a larger fraction of soil Cu (70%) > Zn (67%) > Pb (54%). Bioaccumulation coefficient of soil to root ranged from 51-98 for Zn, 54-85 for Cu and 43-63 for Pb.Analysis of variance showed marginal change in bioaccumulation coefficient, noticed between plants (p > 0.05) while it varied significantly (p < 0.01) between tissues and metals. It increased from root to seed/fruit (root > shoot > seed/fruit) while decreased between metals from Zn to Pb (Zn > Cu > Pb). Out of the three, two Cu and Pb accumulated to phyotoxic levels while Zn was within threshold limit of phytotoxicity.     

Cold plasma technology: advanced and sustainable approach for wastewater treatment

Environmental Science and Pollution Research - Cold plasma has been a potent energy-efficient and eco-friendly advanced oxidation technology which has gained attention in recent decades as a...     

Effect of fluid concentration in titanium machining with an atomization-based cutting fluid (ACF) spray system

The aim of this work is to investigate the effect of metal-working fluid (MWF) concentration on the machining responses including tool life and wear, cutting force, friction coefficient, chip morphology, and surface roughness during the machining of titanium with the use of the ACF spray system. Five different concentrations from 5 to 15% of a water-soluble metalworking fluid (MWF) were applied during turning of a titanium alloy, Ti–6Al–4V. The thermo-physical properties such as viscosity, surface tension and thermal conductivity of these concentrations were also measured. The test results demonstrate that the tool life first extends with the increase in MWF concentration and then drops with further increase. At low concentration (e.g., 5%), a lack of the lubrication effect causes to increase in a higher friction at the tool–chip interface resulting in severe chipping and tool nose/flank wear within a short machining time. On the other hand, at high concentration, the cooling effect is less. This increases cutting temperature and a faster thermal softening/chipping/notching of the tool material and higher friction at the tool–chip–workpiece interaction zones resulting in early tool failure. A good balance between the cooling and the lubrication effects seems to be found at the 10% MWF concentration as it offers the best machining performance. However, machining with flood coolant is observed to perform the best in the range of 5–7%.     

Effects of sheep and goat grazing on the species diversity in the alpine meadows of Western Himalaya

This paper deals with effects of sheep and goat grazing on plant species diversity, species richness and species composition in two important conservation areas of the Western Himalaya; the Valley of Flowers (VOF) National Park and the Great Himalayan National Park (GHNP). The VOF is a completely Protected Area as it is devoid of livestock grazing whereas, 20,000 sheep and goats annually graze in GHNP. Both the National Parks possess sub-alpine and alpine vegetation that is distributed in 13 major habitat types. Present investigations indicate that all the habitat types in VOF are higher in plant species diversity and richness compared to habitat types in GHNP. Similarly, all three eco-climatic zones in VOF are higher in species diversity and richness compared to GHNP. Species diversity also decreases with increasing altitude in both the National Parks. The findings of this study are discussed in the light of the management and conservation of alpine meadows of the Western Himalayas.     

Traditional knowledge and biodiversity conservation: a case study from Byans Valley in Kailash Sacred Landscape,India

Ethnobotanical knowledge plays a significant role in plant diversity conservation and the curing of various ailments in remote rural areas of the Indian Himalayan Region (IHR). A total of 53 plant species from 27 families have been documented from the Byans valley and are used traditionally for the treatment of various diseases. Valley inhabitants have maintained a symbiotic relationship between natural resources and their cultural belief system by developing sacred forests/groves which conserve the region's plant diversity pool. Information on sacred natural sites and traditional beliefs was documented in order to understand the environmental and conservationist implications of these rules and practices. The study provides comprehensive information about eroding traditional knowledge and biodiversity conservation practices. This study could be a pilot to strengthen the conservation practices and sustainable utilization of frequently used bioresources by understanding the traditional knowledge system and conservation ethics of tribal communities in the Himalayan region.