外军皮肤防护器材化学防护性能测试与评价用标准物质研究进展

本文简迷了皮肤防护器材--化学防护服(衣)化学防护性能试验与评价用标准物质的重要性,系统地概述了外军化学防护服(衣)化学防护性能试验与评价用标准物质的研究现状,并提出了我国化学防护服(衣)防护性能试验与评价用标准物质研制过程中应注意的一些问题.     

Sample storage and extraction efficiencies in determination of polycyclic and nitro musks in sewage sludge

Analytical technology is continuously improving, developing better methods for isolating and concentrating trace compounds in environmental samples. Polycyclic and nitro musks (PNMs) are one group of emerging trace compounds detected in municipal wastewater. Differences in sample storage, preparation, and extraction methods for their measurement have led to variability in results. We analyzed 11 PNMs by GC/MS and compared the results of different storage times and extraction methods (supercritical fluid (SFE) or microwave-assisted (MAE)) for 202 samples of primary sludge, waste activated sludge (WAS), raw sludge, and aerobically/anaerobically digested biosolids collected from Canadian municipal wastewater treatment plants. Sixty-three air-dried samples were extracted by SFE, and 139 air-dried, centrifuged, or filtered samples were extracted by MAE. The mean surrogate recoveries were 89% (standard deviation (SD)=11%) for d(10)-anthracene by SFE and 88% (SD=14%) for d(10)-phenanthrene by MAE. Storage study results showed that PNM concentrations changed by a mean of 7% and 9% for primary sludge and WAS respectively after four weeks and decreased up to 25% after 13.5 months of storage in amber glass containers at -18 degrees C. Air-drying of sludge at room temperature caused losses of about 50% of PNM concentrations compared to centrifugation. The proportions of PNMs present in the liquid phase of sludge samples were less than 5% compared to proportions in the sludge solids. The most complete liquid-solid separation was achieved by filtration of frozen/thawed sludge samples, producing a liquid phase that contained less than 1% of the total musk content of the sample.     

Remobilization of polycyclic aromatic hydrocarbons during the resuspension of Yangtze River sediments using a particle entrainment simulator

Remobilization of 16 polycyclic aromatic hydrocarbons (PAHs) during sediment resuspension was investigated using a particle entrainment simulator at shear stress from 0.2 to 0.5Nm(-2), typical of the energy levels present in many tidally driven aquatic environments. The results suggested that desorption from the entrained particles was the primary source of dissolved PAHs. summation operatorPAHs concentrations in particles on volume normalization increased about four times. However, on mass weight basis, summation operatorPAHs concentrations decreased from 6039.74+/-138.28microgkg(-1) to 1665.39+/-112.26microgkg(-1). The same trend was observed for individual PAHs. Dissolved concentrations of PAHs demonstrated significant differences depending on molecular weight and applied shear. The distribution of PAHs between particle and water phase suggested that for three-ring PAHs, the amounts of PAHs in particles were higher than the predicted values during our experiments. This might be due to presence of another active sorbent.     

Influence of start-up on PCDD/F emission of incinerators

This study aims to evaluate the influence of start-up on polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) concentration in the stack flue gas of incinerators and its contributing PCDD/F emission. The PCDD/F emission of the first sample among three consecutive stack flue gas samples of five intermittent incinerators, which sampled at a stable combustion condition after start-up, is 2-3 times higher than the mean of the others. For verifying the PCDD/F characteristics of incinerators during start-up, one continuous MSWI was investigated for two years. The elevated PCDD/F emissions of the MSWI during start-up could reach 96.9 ng I-TEQN m(-3) and still maintained a high PCDD/F emission (40 times higher than the Taiwan emission limit) even 18 h after the injection of activated carbon, indicating the memory effect. Taking the MSWI for example, which consists of four incinerators, the estimated annual PCDD/F emission from normal operational conditions was 0.112 g I-TEQ. However, one start-up procedure can generate approximately 60% of the PCDD/F emissions for one whole year of normal operations. And the PCDD/F emission, which is the result of the start-ups of four incinerators, was at least two times larger than that of a whole year's normal operations, without consideration for the PCDD/F emission contributed by the long lasting memory effect.     

Bioavailability to grains of rice of aged and fresh DDD and DDE in soils

DDT had been widely used around the world before 1980s and is still under production and use for non-agricultural purposes in China. Because of their special physicochemical properties, p,p'-DDT and its main metabolites, p,p'-DDD and p,p'-DDE, accumulated and persisted in the environment, presenting potential menace on biota. A green-house study was conducted to determine the bioavailability of p,p'-DDD and p,p'-DDE to grains of rice and the influences of traditional Chinese farming practices on their bioaccumulation. Paddy rice and dry rice were grown in submerged paddy soils and non-submerged upland soils, respectively. Two types of soil, Hydragric Anthrosols (An) and Hydragric Acrisols (Ac), were employed. Bioaccumulation factors (BAFs) of DDE ranged from 0.67 for rice grown in non-submerged An to 0.84 in submerged An in the control group, whilst BAFs were all below 0.04 in experimental groups. BAFs of DDD varied from 1.39 for submerged An to 2.26 for submerged Ac in original soils. In contrast, BAFs were between 0.05 for non-submerged Ac and 0.08 for submerged An in DDD-contaminated soils. Flooding seemed to have two contradictory effects on the DDE/DDD accumulation by rice: on one hand, it made the pollutants more mobile and bioavailable; while on the other hand, it enhanced the degradation and binding of POPs. Adding rice straw to the soils protected DDE from being taken up yet promoted DDD accumulation by rice. Furthermore, the distinct inorganic component of the soils might also play an important role in the environmental activities of POPs.     

锰掺杂WO3-TiO2复合光催化剂的制备及其性能研究

溶胶-凝胶和浸渍相结合的方法制备锰掺杂WO3-TiO2复合光催化剂,RXD表征,考察WO3和Mn2+掺入量、焙烧温度、焙烧时间及催化剂用量对光催化降解甲基橙的影响。结果表明,500℃焙烧2h,掺杂量n（Mn2+）∶n（WO3）∶n（TiO2）＝0.8∶1∶100时,光催化活性最高,光催化降解甲基橙溶液,120min后,降解率达90%, 比单纯 TiO2的光催化活性提高81%。     

预处理后的活性污泥对锌吸附的研究

剩余活性污泥处理是当今的热点问题,从活性污泥资源化的角度出发,将活性污泥加工成为锌离子的生物吸附剂,比较了8种方法预处理后的活性污泥对锌的吸附效果,分析了这8种方法对污泥吸附能力的影响机理.对经过NaOH和H2O2处理的污泥的吸附特性和影响因素进行了研究,结果表明该吸附过程符合Psemio-seconal Order吸附动力学模型及Freunomch吸附等温模型,低pH不利于吸附,适当提高温度可以增强吸附效果,增加污泥吸附剂浓度可以增加金属离子去除率,但是单位质量吸附剂吸附金属离子的量减小.用红外光谱对比的手段对吸附机理进行了探讨,结果表明污泥颗粒表面一些含氮氧的基团对zn.'的络合作用是主要的吸附机理.该研究在污泥资源化和废水中锌离子的去除方面有重要意义.     

活性红M-3BE脱色真菌的筛选及脱色性能研究

从自然环境中分离到2株对染料活性红M-3BE具有明显脱色效果的真菌,经形态学和26S rDNA序列分析,将其鉴定为Fusarium oxysporum和Geosmithia viridis.采用初始浓度50 mg/L M-3BE的液体培养基同步脱色培养,F.oxysporum在24 h内对M-3BE的脱色率为96%,G.viridis在36 h内的脱色率为82%.对脱色酶系的检测结果表明,脱色过程中F.oxysporum能产生LiP和MnP,G.viridis则仅产生LiP.此外,F.oxysporu和G.viridis对另外7种染料的脱色率也可分别达到16%～100%和83.3%～100%.     

填埋垃圾腐殖质组成在填埋场稳定度表征中的应用

通过对上海老港生活垃圾填埋场1991-2004年封场单元填埋垃圾腐殖质组成的分析,考察了填埋垃圾中腐殖质组成随填埋龄的变化规律.研究结果表明,填埋垃圾腐殖质的总可提取率和胡敏酸(HA)与富里酸(FA)比值(HA/FA)分别随填埋龄呈线性下降和上升趋势.因此,填埋垃圾总可提取率和HA/FA可用来有效表征填埋场和填埋垃圾稳定度.     

海洋柴油溢油油水快速分离的应用研究

针对海洋柴油溢油,采用破乳剂对油水快速分离进行了研究.分别对油水比、温度、破乳剂量及存在Ca2 、Mg2 的影响因素,进行了系列油水快速分离试验,并测定了破乳剂作用下乳液的界面张力.试验结果表明,柴油溢油形成的乳液稳定性较差,油水分离较容易,但分离后的水中含油量较高.加入聚醚类非离子型破乳剂FA、FB、FC和FD,可达到油水低温、快速分离的目的,且分离后的水中含油量较低.随着破乳剂浓度的增加,界面张力降低,当破乳剂浓度达到临界胶束浓度(CMC)时,界面张力最小,脱水效果最好.Ca2 、Mg2 对聚醚类非离子型破乳剂的影响很小.