基于RFPA2D复合局部挠曲岩体数值模拟

为研究复合局部挠曲岩体强度特征以及破坏规律,采用岩石真实破裂软件RFPA^2D,对水平层面挠曲30°,45°,60°,75°的复合岩体进行单轴压缩试验模拟。模拟结果表明:挠曲角为30°,45°,60°,75°的复合岩体破坏面几乎与挠曲段夹层重合,其挠曲端部均产生了垂直于挠曲段夹层的裂纹;复合单斜岩体与复合挠曲岩体破坏面的形成因素大致相同,夹层强度是2种岩体失稳的主要因素;复合挠曲岩体单轴抗压强度随挠曲角增大同样呈“U”型变化,与单斜岩体变化趋势一致;当水平层状岩体发生挠曲后,其单轴抗压强度减小,当挠曲角为60°时,强度降低25.19%,当挠曲角为75°时,强度降低0.17%。;随着均质系数m的增大,复合挠曲岩体单轴抗压强度以及轴向应变均出现逐渐递增的趋势,且不同m值,其岩体裂隙扩展方式具有明显差别。     

基于事故逆向再现的车辆追尾事故仿真分析研究

为认定车辆碰撞事故的性质及责任,动态还原事故发生过程。提出1种逆向事故分析再现方法,经过坐标系旋转后构建确定方程组的车辆碰撞瞬间解析计算模型,并经过实车碰撞实验数据验证其计算精度与三维再现的准确性。利用Crashview软件对1起车辆追尾事故进行仿真分析,解析计算得出车辆碰撞瞬间车速和碰撞前行驶车速,实现事故二维过程重构和三维模拟再现。结果表明:计算分析车速与VDR记录车速误差在5%以内,模拟再现轨迹与事故现场实测痕迹基本吻合,所构建的方法可有效用于车辆追尾碰撞事故辅助分析鉴定,为事故过程分析提供理论依据。     

豆制品加工废水处理工程设计分析

豆制品加工废水有机物和悬浮物浓度较高,水量及水质波动大,且容易发酸发臭。浙江某豆制品生产企业采用化学沉淀+SBR生化工艺对废水进行处理,出水水质达到《污水综合排放标准》GB8978-1996三级标准。该工艺操作简便,运行稳定,处理效率高,适合中小规模豆制品企业废水的处理。     

国内外总量管理制度发展历程对南京市的启示

本文介绍了国内外总量管理制度的发展历程,特别是"十三五"以来我国总量管理工作新的规定,并由此产生的针对南京市主要污染物总量管理工作的几点启示。     

环境污染治理工程管理对策分析

随着环境问题的日益突出,环境保护以及环境治理越来越迫切,由于造成环境污染问题的因素特别多,在对污染原因没有明确了解的情况下,盲目的着手进行环境污染治理工作,将会很难达到预期的治理效果。因此,作者从环境污染治理工程管理入手,进一步探索导致环境污染问题日益严重的根本原因,并详细分析加强环境污染治理工程管理的有效方略,旨在提高我国环境污染治理工程管理水平。     

关于生态环境地质的基本特点与技术分析

地球是一个生态系统,其包含了大气圈、水圈以及生物圈等。各个圈层之间存有的关联性十分密切,促进这些圈层的协调发展,才可以保障生态环境的和谐性。     

二氧化锰基纳米材料对重金属离子的去除及机理研究进展

重金属离子对人类健康和环境安全产生了严重威胁,因此重金属废水高效处理成为了环境领域最具挑战性的热点问题之一.二氧化锰(MnO_2)是一种环境友好型金属氧化物,具有来源广泛、成本低廉、形貌多样、晶型丰富、结构稳定、粒径可控等优异的性质,在重金属离子的去除应用上展现出巨大的潜力.近年来,人们利用MnO_2基纳米材料在重金属离子的有效治理方面开展了大量的研究.本文综述了MnO_2基纳米材料在重金属离子环境修复方面取得的研究进展,包括MnO_2的制备和改性方法,MnO_2基纳米材料在水溶液重金属离子去除中的应用及吸附作用机制,并对研究方向进行了总结和展望,旨在为进一步设计合成对重金属离子的吸附去除具有实际应用价值的MnO_2基纳米材料提供参考.     

Sulfur cycle as an electron mediator between carbon and nitrate in a constructed wetland microcosm

• Fe(III) accepted the most electrons from organics, followed by NO₃^‒, SO₄^2‒, and O₂. • The electrons accepted by SO₄^2‒ could be stored in the solid AVS, FeS₂-S, and S⁰. • The autotrophic denitrification driven by solid S had two-phase characteristics. • A conceptual model involving electron acceptance, storage, and donation was built. • S cycle transferred electrons between organics and NO₃^‒ with an efficiency of 15%. A constructed wetland microcosm was employed to investigate the sulfur cycle-mediated electron transfer between carbon and nitrate. Sulfate accepted electrons from organics at the average rate of 0.84 mol/(m³·d) through sulfate reduction, which accounted for 20.0% of the electron input rate. The remainder of the electrons derived from organics were accepted by dissolved oxygen (2.6%), nitrate (26.8%), and iron(III) (39.9%). The sulfide produced from sulfate reduction was transformed into acid-volatile sulfide, pyrite, and elemental sulfur, which were deposited in the substratum, storing electrons in the microcosm at the average rate of 0.52 mol/(m³·d). In the presence of nitrate, the acid-volatile and elemental sulfur were oxidized to sulfate, donating electrons at the average rate of 0.14 mol/(m³·d) and driving autotrophic denitrification at the average rate of 0.30 g N/(m³·d). The overall electron transfer efficiency of the sulfur cycle for autotrophic denitrification was 15.3%. A mass balance assessment indicated that approximately 50% of the input sulfur was discharged from the microcosm, and the remainder was removed through deposition (49%) and plant uptake (1%). Dominant sulfate-reducing (i.e., Desulfovirga, Desulforhopalus, Desulfatitalea, and Desulfatirhabdium) and sulfur-oxidizing bacteria (i.e., Thiohalobacter, Thiobacillus, Sulfuritalea, and Sulfurisoma), which jointly fulfilled a sustainable sulfur cycle, were identified. These results improved understanding of electron transfers among carbon, nitrogen, and sulfur cycles in constructed wetlands, and are of engineering significance.     

A review of measurement methods for peracetic acid (PAA)

• Physical and chemical properties and application of peracetic acid solution. • Determination method of high concentration peracetic acid. • Determination method of residual peracetic acid (low concentration). Peroxyacetic acid has been widely used in food, medical, and synthetic chemical fields for the past several decades. Recently, peroxyacetic acid has gradually become an effective alternative disinfectant in wastewater disinfection and has strong redox capacity for removing micro-pollutants from drinking water. However, commercial peroxyacetic acid solutions are primarily multi-component mixtures of peroxyacetic acid, acetic acid, hydrogen peroxide, and water. During the process of water treatment, peroxyacetic acid and hydrogen peroxide (H₂O₂) often coexist, which limits further investigation on the properties of peroxyacetic acid. Therefore, analytical methods need to achieve a certain level of selectivity, particularly when peroxyacetic acid and hydrogen peroxide coexist. This review summarizes the measurement and detection methods of peroxyacetic acid, comparing the principle, adaptability, and relative merits of these methods.     

Functional wastepaper-montmorillonite composite aerogel for Cd2+ adsorption

Environmental Science and Pollution Research - In this study, a composite aerogel (WP-MMT) composed of wastepaper (WP) and montmorillonite (MMT) was prepared by ambient pressure drying technology...