不同分子量的腐殖酸存在下2种无机砷的生物毒性效应研究

水环境中天然有机质会与砷形成络合物,进而影响砷的迁移、转化和生物毒性。研究利用超滤方法将腐殖酸(humic acid, HA)分为5个不同分子量的组分,以大型溞为受试生物,探究了不同分子量HA存在下砷对大型溞的毒性效应。结果表明,不同分子量的HA均缓解了As(Ⅲ)和As(Ⅴ)对大型溞的氧化应激损伤和细胞膜损伤,并降低了砷对MT的诱导量。其中1～30 k Da的HA对砷的缓解效果最好,1 k Da的HA毒性缓解效果最差,可能的原因是HA与砷的络合增加溶液中络合态砷的含量,而络合态砷难以进入细胞并被生物利用。不同分子量的HA对砷毒性的缓解差异与其跟砷的络合比例不同有关。     

Carbon nanotubes-incorporated MIL-88B-Fe as highly efficient Fenton-like catalyst for degradation of organic pollutants

CNTs were incorporated into MIL-88B-Fe to get a new Fenton-like catalyst (C@M). Fe(II) was introduced in C@M to get a fast initiation of Fenton-like reaction. Fe(II) content in C@M was related with oxygen-containing functional groups on CNTs. C@M shows efficient catalytic degradation of pollutants over a wide pH range. Iron-based metal organic frameworks have been verified to be efficient heterogeneous Fenton catalysts due to their open pore channels and highly uniform distribution of metallic centers. In these catalysts, however, the iron element is mainly in the form of Fe(III), which results in a process required to reduce Fe(III) to Fe(II) to initiate Fenton reaction. To address this problem, carbon nanotubes (CNTs) with electron-rich oxygen-functional groups on the surface were incorporated into the metal organic frameworks (MIL-88B-Fe) to improve Fe(II) content for an enhanced Fenton-like performance. The prepared CNT@MIL-88B-Fe (C@M) showed much stronger catalytic ability toward H₂O₂ than MIL-88B-Fe. The pseudo-first-order kinetic constant for phenol degradation by C@M (0.32 min^–1) was about 7 times that of MIL-88B-Fe, and even higher than or comparable to the values of reported heterogeneous Fenton-like catalysts. Moreover, the Fenton-like system could effectively degrade various kinds of refractory organic pollutants and exhibited excellent catalytic activity over a wide pH range (4–9). XPS analysis confirmed that Fe(II) content of the catalyst gradually increased with CNT loadings. Electron spin resonance analysis showed that the signal intensity (•OH) of C@M was much higher than MIL-88B-Fe, which was consistent with the degradation efficiency of pollutants. Furthermore, the Fe(II) content of the catalyst gradually increased along with the oxygen-functional group content of CNTs. The result demonstrated that oxygen-containing functional groups of CNTs have a significant impact on the enhanced catalytic performance of C@M. This study provides a new insight to enhance Fenton reaction by using nanocarbon materials.     

Comparison of CNT-PVA membrane and commercial polymeric membranes in treatment of emulsified oily wastewater

CNT-PVA membrane was fabricated and compared with polymeric membranes. The separation performance was evaluated by homemade and cutting fluid emulsions. The three membranes show similar oil retention rates. CNT-PVA membranes have higher permeation fluxes compared with polymeric membranes. CNT-PVA membrane shows higher fouling resistance. Membrane separation is an attractive technique for removal of emulsified oily wastewater. However, polymeric membranes which dominate the current market usually suffer from severe membrane fouling. Therefore, membranes with high fouling resistance are imperative to treat emulsified oily wastewater. In this study, carbon nanotube-polyvinyl alcohol (CNT-PVA) membrane was fabricated. And its separation performance for emulsified oily wastewater was compared with two commercial polymeric membranes (PVDF membrane and PES membrane) by filtration of two homemade emulsions and one cutting fluid emulsion. The results show that these membranes have similar oil retention efficiencies for the three emulsions. Whereas, the permeation flux of CNT-PVA membrane is 1.60 to 3.09 times of PVDF membrane and 1.41 to 11.4 times of PES membrane, respectively. Moreover, after five consecutive operation circles of filtration process and back flush, CNT-PVA membrane can recover 62.3% to 72.9% of its initial pure water flux. However, the pure water flux recovery rates are only 24.1% to 35.3% for PVDF membrane and 6.0% to 26.3% for PES membrane, respectively. Therefore, CNT-PVA membrane are more resistant to oil fouling compared with the two polymeric membranes, showing superior potential in treatment of emulsified oily wastewater.     

机动车尾气对人体健康的危害

随着城市机动车保有量的不断增加,机动车尾气已经成为影响我国城市大气环境的主要问题之一。本文以儿童和交通警察两类人群为例,分析了机动车尾气污染给人体呼吸系统、免疫系统、心脑血管系统等造成的危害。结果表明,由于儿童的呼吸带与机动车尾气排放带非常接近,交警在机动车尾气环境中暴露事件太长,导致这两类人群的呼吸系统极易遭到破坏,发生支气管炎等疾病的概率大大增加;而免疫球蛋白水平和血压发生改变导致了抵抗能力的下降。最后建议通过采取发展公共交通、加强城市交通管理、完善检查维修制度等有效措施加强机动车尾气治理,减少对人体健康产生的危害。     

Hexachlorocyclohexane (HCH) as new Stockholm Convention POPs��a global perspective on the management of Lindane and its waste isomers

Purpose

Hexachlorocyclohexane (HCH) isomers (??-, ??- and ??- (Lindane)) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention, and therefore, the legacy of HCH and Lindane production became a contemporary topic of global relevance. This article wants to briefly summarise the outcomes of the Stockholm Convention process and make an estimation of the amount of HCH waste generated and dumped in the former Lindane/HCH-producing countries.

Results

In a preliminary assessment, the countries and the respective amount of HCH residues stored and deposited from Lindane production are estimated. Between 4 and 7 million tonnes of wastes of toxic, persistent and bioaccumulative residues (largely consisting of alpha- (approx. 80%) and beta-HCH) are estimated to have been produced and discarded around the globe during 60 years of Lindane production. For approximately 1.9 million tonnes, information is available regarding deposition. Countries are: Austria, Brazil, China, Czech Republic, France, Germany, Hungary, India, Italy, Japan, Macedonia, Nigeria, Poland, Romania, Slovakia, South Africa, Spain, Switzerland, Turkey, The Netherlands, UK, USA, and former USSR. The paper highlights the environmental relevance of deposited HCH wastes and the related POPs?? contaminated sites and provides suggestions for further steps to address the challenge of the legacy of HCH/Lindane production.

Conclusion

It can be expected that most locations where HCH waste was discarded/stockpiled are not secured and that critical environmental impacts are resulting from leaching and volatilisation. As parties to the Stockholm Convention are legally required to take action to stop further POPs pollution, identification and evaluation of such sites are necessary.     

阶式生物接触氧化对富营养化太湖水源水中溶解有机物的去除性能研究

构建阶式生物接触氧化反应器处理富营养化太湖水源水,对其净水效能进行研究。结果表明,在优化工况条件下,阶式生物氧化反应器的三阶对太湖水源水中DOC的累积去除率分别为34．4％、40．2％和47．5％,对BDOC的总去除率为68．4％,除生物降解外,填料拦截、生物吸附絮凝等物理、化学作用对去除原水中的DOC仍有重要作用。DOC分子量分级表明,太湖源水中含量最大的是分子量〈500Da的DOC,含量最小的是分子量在5k～500Da间的DOC。阶式生物接触氧化反应器对分子量〈500 Da的DOC的去除率在60％以上,而出水中5k～500 Da区间的DOC含量相比原水增加近1倍。     

垂直流人工湿地水力学特性研究

通过示踪剂实验从停留时间分布（RTD）曲线及其统计特征值等方面对垂直流人工湿地的水力学特性进行了定性和定量的分析。研究表明水流在垂直流人工湿地中的流动是一种非理想的不均匀流动,存在一定的死区和水流的扩散;垂直流人工湿地较大的死区率与其表面布水的不均匀性有关,这也可能是其死区率大于表流人工湿地的最主要的原因。实验还表明,进水流量对垂直流人工湿地停留时间分布影响较大,随着进水流量的增加,平均停留时间减小,但标准平均停留时间增大,死区率减小;当进水流量为15L／h（水力负荷为620mm／d）时,水流在湿地中的散度最大,水流更接近全混流,不利于污染物的降解。     

等离子体固态可燃物液化反应动力学分析

本文利用介质阻挡放电等离子体技术,对以煤和生物质为代表的固态可燃物液化反应机理进行研究,以期探索能源利用新途径.借助碰撞理论和Boltzman方程,对高能电子碰撞引发多种离解反应的速率常数进行数值模拟,计算结果和实验曲线对比,证明模型具有一定的适用性和可靠性.在一定的电子温度下,通过不同离解反应速率常数的对比,可以判断...     

人工湿地基质的筛选及其对猪场废水厌氧消化液中氨氮吸附性能研究

采用静态吸附实验,对比了岷江砂、沱江砂、青衣江砂、沸石、活性炭对猪场废水厌氧消化液中氨氮的吸附去除效率,基于氨氮去除能力、购买成本与运费的比较,筛选出性价比较高的基质--岷江砂作为四川地区人工湿地的基质处理猪场废水厌氧消化液.吸附实验表明,砂对氨氮的去除率随振荡时间和投加量的增加而增加.通过吸附等温曲线Langmuir...     

Review of the progress in preparing nano Ti02： An important environmental engineering material

TiO2 nanomaterial is promising with its high potential and outstanding performance in photocatalytic environmental applications, such as CO2 conversion, water treatment, and air quality control. For many of these applications, the particle size, crystal structure and phase, porosity, and surface area influence the activity of TiO2 dramatically. TiO2 nanomaterials with special structures and morphologies, such as nanospheres, nanowires, nanotubes, nanorods, and nanoflowers are thus synthesized due to their desired characteristics. With an emphasis on the different morphologies of TiO2 and the influence factors in the synthesis, this review summarizes fourteen TiO2 preparation methods, such as the sol-gel method, solvothermal method, and reverse micelle method. The TiO2 formation mechanisms, the advantages and disadvantages of the preparation methods, and the photocatalytic environmental application examples are proposed as well.