Partitioning gas tracer tests for measurement of water in municipal solid waste

A key component in the operation of almost all bioreactor landfills is the addition of water to maintain optimal moisture conditions. To determine how much water is needed and where to add it, in situ methods are required to measure water within solid waste. Existing technologies often result in measurements of unknown accuracy, because of the variability of solid waste materials and time-dependent changes in packing density, both of which influence most measurement methods. To overcome these problems, a new technology recently developed by hydrologists for measuring water in the vadose zone--the partitioning gas tracer test--was tested. In this technology, the transport behavior of two gas tracers within solid waste is used to measure the fraction of the void space filled with water. One tracer is conservative and does not react with solids or liquids, while a second tracer partitions into the water and is separated from the conservative tracer during transport. This technology was tested in four different solid waste packings and was capable of determining the volumetric water content to within 48% of actual values, with most measurement errors less than 15%. This technology and the factors that affect its applicability to landfills are discussed in this paper.     

An extended self-organizing map network for modeling and control of pulse jet fabric filters

Pulse jet fabric filters (PJFFs) have become an attractive option of particulate collection utilities, because they can meet stringent particulate emission limits regardless of variation in operating conditions. Despite their wide applications, the present control algorithm for PJFFs can best be described as rudimentary. In this paper, a modeling and control strategy based on the local model network (LMN) is proposed. An extended self-organizing map (ESOM) network is developed to construct the LMN model of the filtration process using the filter's input-output data. Subsequently, these ESOM local models are incorporated into the design of local generalized predictive controllers (GPC), and the proposed controller design is obtained as the weighted sum of these local controllers. Simulation results show that the proposed controller design yields a better performance than both conventional GPC and proportional plus integral (PI) controllers yield.     

Decomposition of 2-mercaptothiazoline in aqueous solution by ozonation

This study investigates the ozonation of 2-mercaptothiazoline (2-MT). The 2-MT is one of the important organic additives for the electroplating solution of the printed wiring board industry and has been widely used as a corrosion inhibitor in many industrial processes. It is of concern for the aquatic pollution control especially in the wastewaters. Semibatch ozonation experiments in the completely stirred tank reactor are performed under various concentrations of input ozone. The concentrations of 2-MT, sulfate, and ammonium are analyzed at specified time intervals to elucidate the decomposition of 2-MT during the ozonation. In addition, the time variation of the dissolved ozone concentration (C(ALb)) is continuously monitored in the course of experiments. Total organic carbon (TOC) is chosen and measured as a mineralization index of the ozonation of 2-MT. The results indicate that the decomposition of 2-MT is efficient, while the mineralization of TOC is limited via the ozonation only. Simultaneously, the yield of sulfate with the maximum value of about 47% is characterized by the increases of TOC removal and ozone consumption. These results can provide some useful information for assessing the feasibility of the treatment of 2-MT in the aqueous solution by the ozonation.     

The role of black carbon as a catalyst for environmental redox transformation

Black carbon (BC) is an important class of geosorbents that control the fate and transport of organic pollutants in soil and sediment. We previously demonstrated a new role of BC as an electron transfer mediator in the abiotic reduction of nitroaromatic and nitramine compounds by Oh and Chiu (Environ Sci Technol 43:6983–6988, 2009). We proposed that BC can catalyze the reduction of nitro compounds because it contains microscopic graphitic (graphene) domains, which facilitate both sorption and electron transfer. In this study, we assessed the ability of different types of BC—graphite, activated carbon, and diesel soot—to mediate the reduction of 2,4-dinitrotoluene (DNT) and 2,4-dibromophenol (DBP) by H₂S. All three types of BC enhanced DNT and DBP reduction. H₂S supported BC-mediated reduction, as was observed previously with a thiol reductant. The results suggest that BC may influence the fate of organic pollutants in reducing subsurface environments through redox transformation in addition to sorption.     

Assessing the effects of severe rainstorm-induced mixing on a subtropical,subalpine lake

Severe rainstorms cause vertical mixing that modifies the internal dynamics (e.g., internal seiche, thermal structure, and velocity filed) in warm polymictic lakes. Yuan Yang Lake (YYL), a subtropical, subalpine, and seasonally stratified small lake in the north-central region of Taiwan, is normally affected by typhoons accompanied with strong wind and heavy rainfall during the summer and fall. In this study, we used the field data, statistical analysis, spectral analysis, and numerical modeling to investigate severe rainstorm-induced mixing in the lake. Statistical determination of the key meteorological and environmental conditions underlying the observed vertical mixing suggests that the vertical mixing, caused by heat loss during severe rainstorms, was likely larger than wind-induced mixing and that high inflow discharge strongly increased heat loss through advection heat. Spectral analysis revealed that internal seiches at the basin scale occurred under non-rainstorm meteorological conditions and that the internal seiches under the rainstorm were modified on the increase of the internal seiche frequencies. Based upon observed frequencies of the internal seiches, a two-dimensional model was simulated and then appropriate velocity patterns of the internal seiches were determined under non-rainstorm conditions. Moreover, the model implemented with inflow boundary condition was conducted for rainstorm events. The model results showed that the severe rainstorms promoted thermal destratification and changed vertical circulation of the basin-scale, internal seiche motion into riverine flow.     

Sedimentary Pigments and Organic Matter in Relation to Benthic Fauna in the Tan-Shui Estuary, Taiwan

The benthic ecological structure of the Tan-Shui estuary, Taiwan is changed due to long term effects of dumping of urban wastewater and of engineering actions. to monitor these changes, we sampled and analyzed benthos and sediment from 12 stations on the estuary.

The composition of the dominant species of benthos varied seasonally, with molluscan and crustacean species having greater numbers and higher frequencies of occurrence than other species. the dominant taxa during winter were Nassarius sp. and Maldanidae at two stations. Analysis using Simpson's index and Shannon's index showed the benthic community varied more in coastal areas than in offshore areas.

Physicochemical analysis showed that most of the Tan-Shui estuary consisted of sandy sediment. the variations in concentrations of organic carbon and total nitrogen at each station were small. Although the concentrations of chlorophyll-a and carotenoid at all stations were generally low, the two stations had the highest concentrations, and we concluded that the concentration of pigments in these sediments was related to the abundance of benthos. the community structure of the benthos reflected the characteristics of the sediments, and benthic species exhibited selection of and adaptation to specific sedimentary environments.     

Molecular detection and comparison of Acanthamoeba genotypes in different functions of watersheds in Taiwan

The protistan genus Acanthamoeba is a free-living amoeba existing in various environments. Within this protistan genus, there are some species recognized as potential human pathogens, which may cause granulomatous amoebic encephalitis, Acanthamoeba keratitis and chronic granulomatous lesions of the skin. In this study, 211 water samples were collected from two watersheds in southern Taiwan. We detected Acanthamoeba based on the PCR amplification with a genus-specific primer pair and investigation of Acanthamoeba in Puzih River and Kaoping River in southern Taiwan. Acanthamoeba species were detected in 34 (16.1%) samples. The presence or absence of Acanthamoeba within the water samples showed significant difference with the levels of water temperature and total coliforms. The most frequently identified Acanthamoeba genotype was T4 (n = 19), followed by T5 (n = 8), and then T15 (n = 3). Genotype T6, T7/T8, T11 and T12 were all detected once. Genotype T4, T5, T6, T11 and T15 of Acanthamoeba are responsible for Acanthamoeba keratitis and should be considered a potential health threat associated with human activities in environmental surface water watersheds.     

Characteristics of the PAH emissions from the incineration of livestock wastes with/without APCD

This study was conducted on two batch-type livestock waste incinerators, including the one with an air-pollution control device (APCD)-one wet scrubber (WSB) and the other without APCD for the disposal of livestock wastes. The concentration and composition of 21 individual polycyclic aromatic hydrocarbons (PAHs) in the stack flue gas (gas and particle phases), bottom ash, and effluent of WSB were determined. Stack flue gas samples were collected by a PAH stack-sampling system. Twenty-one individual PAHs were analyzed by a gas chromatography/mass spectrometer (GC/MS). Due to the low combustion temperature, a remarkable and significant increase in the total-PAH concentration of emission from the stack with APCD was observed when compared with the case without APCD. Measured total-PAH emission factors were 285 and 2.86 mg/kg waste for the incineration with and without APCD, respectively, while BaP (the most carcinogenic PAH) emission factors were 0.79 and 0.12 mg/kg waste for the incineration with and without APCD. The total-PAH output/input mass ratios averaged 0.011 and 0.004 with and without APCD, respectively. The result reveals that the PAH content in the auxiliary fuel during the incinerating process could affect the emission of PAH.