cfDNA screening and diagnosis of monogenic disorders – where are we heading?

Cell-free fetal DNA analysis for non-invasive prenatal screening of fetal chromosomal aneuploidy has been widely adopted for clinical use. Fetal monogenic diseases have also been shown to be amenable to non-invasive detection by maternal plasma DNA analysis. A number of recent technological developments in this area has increased the level of clinical interest, particularly as one approach does not require customized reagents per mutation. The mutational status of the fetus can be assessed by determining which parental haplotype that fetus has inherited based on the detection of haplotype-associated SNP alleles in maternal plasma. Such relative haplotype dosage analysis requires the input of the parental haplotype information for interpretation of the fetal inheritance pattern from the maternal plasma DNA data. The parental haplotype information can be obtained by direct means, reducing the need to infer haplotypes using DNA from other family members. The technique also allows the assessment of complex mutations and has multiplexing capabilities where a number of genes and mutations can be assessed at the same time. These advantages allow non-invasive prenatal diagnosis of fetal monogenic diseases to be much more scalable. These applications may drive the next wave of clinical adoption of cell-free fetal DNA testing. © 2018 The Authors Prenatal Diagnosis Published by John Wiley & Sons Ltd     

Trace metals in mussels from mariculture zones, Hong Kong

In 1997, concentrations of cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb) and nickel (Ni) were analysed in green-lipped mussels (Perna viridis) from three mariculture zones located in the north-east (Kat O), south (Lo Tik Wan) and to the west (Ma Wan) of Hong Kong. Spatial differences in the concentration of metals were found, chromium and copper were higher at Ma Wan and Lo Tik Wan compared to Kat O in the north-east. In contrast, the highest levels of lead (mean = 4.37 microg/g dry wt) were recorded at Kat O. There were no differences in the level of nickel between the study sites. A comparison of the metal concentrations in mussels with the results of a previous study seven years before, in 1990, showed a twofold increase in the mean levels of cadmium for all three sites. However, levels of the other metals in 1997 were lower by 12-32% for chromium, 32-39% for copper and 24-25% for nickel. The greatest reductions were recorded for lead: Kat O (39%), Ma Wan (51%) and Lo Tik Wan (75%). This may be related to the introduction of lead-free petrol in 1991. Despite the apparent reduction in some heavy metal bioaccumulation between 1990 and 1997, from a public health risk perspective, the data suggest a continued need for monitoring of heavy metals in mussels from mariculture zones.     

Rubber tire life cycle assessment and the effect of reducing carbon footprint by replacing carbon black with graphene

This research utilizes real operating data from a tire plant operating in Central Taiwan to investigate the carbon footprint emissions (CO₂e) involved in producing the electric bicycle. The simulation results are based on the PAS 2050 standard using the SimaPro 7.3 software tool. Our results show the total carbon footprint emissions of 1.2-kg tire for the electric bicycle weighing 4.53-kg CO₂e, composed of 2.63-kg CO₂e from raw tire materials stage, 1.295-kg CO₂e from tire manufacturing stage, and 0.605-kg CO₂e from tire transport stage. An international certified organization, British Standard Institute (BSI), verified the accuracy of our results as 98.7%. We found that carbon emissions at the raw materials stage were higher than that for the other two stages – manufacturing and transportation. Carbon black was determined as the maximum source of carbon emissions at the raw material stage. To reduce the tire plant carbon emissions, this paper recommends using graphene to replace carbon black. Graphene has been reported by many researches to improve the properties of rubber products. From our simulation results, the carbon footprint emissions of 4.56-kg CO₂e of the origin tire plant uses 0.456-kg carbon black to produce 1.2-kg electric bicycle tires. This can be reduced to 4.29 (5.92%), 4.03 (11.62%), 3.75 (11.76%), and 3.49-kg CO₂e (23.46%) by using graphene to replace carbon black 25, 50, 75, and 100 wt% respectively. If we focus only on 0.456-kg carbon black producing 1.08-kg CO₂e, the reduced carbon footprint will be 0.812 (24.81%), 0.547 (49.35%), 0.28 (74.07%), and 0.0128-kg CO₂e (98.81%) by using graphene to replace carbon black 25, 50, 75, and 100 wt% respectively. From our analysis, graphene replacing carbon black can reduce carbon footprint. This has not been published previously and provides a direction for the tire plant to save carbon emissions.     

Benefits of clean development mechanism application on the life cycle assessment perspective: a case study in the palm oil industry

This study performed an assessment on the beneficial of the Clean Development Mechanism (CDM) application on waste treatment system in a local palm oil industry in Malaysia. Life cycle assessment (LCA) was conducted to assess the environmental impacts of the greenhouse gas (GHG) reduction from the CDM application. Calculations on the emission reduction used the methodology based on AM002 (Avoided Wastewater and On-site Energy Use Emissions in the Industrial Sector) Version 4 published by United Nations Framework Convention on Climate Change (UNFCC). The results from the studies showed that the introduction of CDM in the palm oil mill through conversion of the captured biogas from palm oil mill effluent (POME) treatment into power generation were able to reduce approximate 0.12 tonnes CO2 equivalent concentration (tCO2e) emission and 30 kW x hr power generation per 1 tonne of fresh fruit bunch processed. Thus, the application of CDM methodology on palm oil mill wastewater treatment was able to reduce up to 1/4 of the overall environment impact generated in palm oil mill.     

Biohydrogen production by Clostridium butyricum and Rhodopseudomonas palustris in Co-cultures

This study evaluated biohydrogen production by co-culture of Clostridium butyricum and Rhodopseudomonas palustris. C. butyricum and R. palustris were grown separately and together as batch cultures. Hydrogen production, growth, NH₄-N, total volatile fatty acid production, and sucrose degradation were monitored. The hydrogen production of the co-culture produced 562 ml, R. palustris 426 ml, and C. butyricum 333 ml. The co-culture produced 2.16 mol H₂/mol sucrose, C. butyricum and R. palustris produced 1.77 and 1.64 mol H₂/mol sucrose, respectively. The co-culture was more efficient in the hydrogen production. Therefore, the co-culture is a good method for biohydrogen fermentation.     

Partitioning Gas Tracer Tests for Measurement of Water in Municipal Solid Waste

Abstract

A key component in the operation of almost all bioreactor landfills is the addition of water to maintain optimal moisture conditions. To determine how much water is needed and where to add it, in situ methods are required to measure water within solid waste. Existing technologies often result in measurements of unknown accuracy, because of the variability of solid waste materials and time-dependent changes in packing density, both of which influence most measurement methods. To overcome these problems, a new technology recently developed by hydrologists for measuring water in the vadose zone—the partitioning gas tracer test—was tested. In this technology, the transport behavior of two gas tracers within solid waste is used to measure the fraction of the void space filled with water. One tracer is conservative and does not react with solids or liquids, while a second tracer partitions into the water and is separated from the conservative tracer during transport. This technology was tested in four different solid waste packings and was capable of determining the volumetric water content to within 48% of actual values, with most measurement errors less than 15%. This technology and the factors that affect its applicability to landfills are discussed in this paper.     

Water-soluble ions in nano/ultrafine/fine/coarse particles collected near a busy road and at a rural site

This study investigated water-soluble ions in the sized particles (particularly nano (PM(0.01-0.056))/ultrafine (PM(0.01-0.1))) collected using MOUDI and Nano-MOUDI samplers near a busy road site and at a rural site. The analytical results demonstrate that nano and coarse particles exhibited the highest (16.3%) and lowest (8.37%) nitrate mass ratios, respectively. The mass ratio of NO(3)(-) was higher than that of SO(4)(2-) in all the sized particles at the traffic site. The secondary aerosols all displayed trimodal distributions. The aerosols in ultrafine particles collected at the roadside site exhibited Aitken mode distributions indicating they were of local origin. This finding was not observed for those ultrafine particles collected at the rural site. The mass median diameters (MMDs) of the nano, ultrafine, and fine particles were smaller at the traffic site than at the rural site, possibly related to the contribution of mobile engine emissions.     

Efficiency assessment of coal energy and non-coal energy under bound dynamic DDF DEA

Environmental Science and Pollution Research - The demand for energy has continued to increase because of global economic development, which has led to rising fuel prices and continued pollution...     

Porous materials produced from incineration ash using thermal plasma technology

This study presents a novel thermal plasma melting technique for neutralizing and recycling municipal solid waste incinerator (MSWI) ash residues. MSWI ash residues were converted into water-quenched vitrified slag using plasma vitrification, which is environmentally benign. Slag is adopted as a raw material in producing porous materials for architectural and decorative applications, eliminating the problem of its disposal. Porous materials are produced using water-quenched vitrified slag with Portland cement and foaming agent. The true density, bulk density, porosity and water absorption ratio of the foamed specimens are studied here by varying the size of the slag particles, the water-to-solid ratio, and the ratio of the weights of the core materials, including the water-quenched vitrified slag and cement. The thermal conductivity and flexural strength of porous panels are also determined. The experimental results show the bulk density and the porosity of the porous materials are 0.9–1.2 g cm^?3 and 50–60%, respectively, and the pore structure has a closed form. The thermal conductivity of the porous material is 0.1946 W m^?1 K^?1. Therefore, the slag composite materials are lightweight and thermal insulators having considerable potential for building applications.     

Numerical modeling of aquaculture dissolved waste transport in a coastal embayment

Marine aquaculture is expanding rapidly without reliable quantification of effluents. The present study focuses on understanding the transport of dissolved wastes from aquaculture pens in near-coastal environments using the hydrodynamics code SUNTANS (Stanford Unstructured Nonhydrostatic Terrain-following Adaptive Navier–Stokes Simulator), which employs unstructured grids to compute flows in the coastal ocean at very high resolution. Simulations of a pollutant concentration field (in time and space) as a function of the local environment (bathymetry), flow conditions (tides and wind-induced currents), and the location of the pens were performed to study their effects on the evolution of the waste plume. The presence of the fish farm pens cause partial blockage of the flow, leading to the deceleration of the approaching flow and formation of downstream wakes. Results of both the near-field area (area within 10 to 20 pen diameters of the fish-pen site) as well as far-field behavior of the pollutant field are presented. These detailed results highlight for the first time the importance of the wake vortex dynamics on the evolution of the near-field plume as well as the rotation of the earth on the far-field plume. The results provide an understanding of the impact of aquaculture fish-pens on coastal water quality.