A review on the usage of POP pesticides in China, with emphasis on DDT loadings in human milk

This article attempts to review the usage of nine pesticides included in the 12 Stockholm Convention persistent organic pollutants (POPs) in China and to examine the extent of DDT contamination in human milk, focusing on the Chinese populations. By comparing all the data available concerning DDTs in human milk from 19 countries, it is revealed that the Chinese populations exhibit rather high concentrations of DDTs, due to the fact that China has been a major producer and consumer of DDTs in the past, and also uses DDT for vector control, resulting in higher background levels of DDTs in different ecological compartments. The high body loading of DDT in Chinese populations is also related to the high dietary intake due to contamination of food. When comparing the data obtained recently (1998-2002), the coastal populations such as Guangzhou (DDE+DDT 2.13 microgg(-1) fat), Hong Kong (2.87 microgg(-1) fat) and Dalian (2.13 microgg(-1) fat) contain higher concentrations of DDTs which may reflect the dietary difference of consuming more meat and fish, than other Chinese populations (Beijing 1.96 microgg(-1) fat; Shenyang 0.87 microgg(-1) fat). In general, the rather low ratio of DDE/DDT (e.g., 4.07 for Guangzhou) of the Chinese milk samples reflected the more recent releases of DDT. It is recommended to impose a tighter control on the use of DDT for vector control as well as for agricultural application, conduct regular monitoring of DDT concentrations in different ecological compartments which include air, water, sediment and biota. Human milk is a preferred indicator reflecting human body loadings of POPs including DDTs, as well as the risk which may impose on our next generation. A national wide survey is needed to investigate the intake of POPs, including POP pesticides, due to dietary differences, with a strong focus on the more sensitive populations, e.g., coastal residents who consume a large amount of fish.     

Evaluation of bioremediation effectiveness on crude oil-contaminated sand

A treatability study was conducted using sea sand spiked with 3% or 6% (w/w) of Arabian light crude oil to determine the most effective bioremediation strategies for different levels of contamination. The sea sand used in the study was composed of gravel (0.1%), sand (89.0%), and silt and clay (10.9%). The water content of the sea sand was adjusted to 12.6% (w/w) for the study. Different combinations of the following treatments were applied to the sand in biometer flasks: the concentration of oil (3% or 6%), the concentration of a mixture of three oil-degrading microorganisms (Corynebacterium sp. IC-10, Sphingomonas sp. KH3-2 and Yarrowia sp. 180, 1x10(6) or 1x10(8) cells g-1 sand), the concentration of the surfactant Tween 80 (1 or 10 times the critical micelle concentration), and the addition of SRIF in a C:N:P ratio of 100:10:3. Three biometer flasks per combination of experimental conditions were incubated, and the performance of each treatment was examined by monitoring CO2 evolution, microbial activity, and oil degradation rate. The results suggest that the addition of inorganic nutrients accelerated the rate of CO2 evolution by a factor of 10. The application of oil-degrading microorganisms in a concentration greater than that of the indigenous population clearly increased biodegradation efficiency. The application of surfactant slightly enhanced the oil degradation rate in the contaminated sand treated with the higher concentration of oil-degrading microorganisms. The initial CO2 evolution rate was shown to efficiently evaluate the treatability test by providing significant data within a short period, which is critical for the rapid determination of the appropriate bioremediation approach. The measurements of microbial activity and crude oil degradation also confirmed the validity of the CO2 evolution rate as an appropriate criterion.     

Comparison of PCDD/F and coplanar PCB concentrations in Japanese human adipose tissue collected in 1970-1971, 1994-1996 and 2000

Concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and coplanar biphenyls (Co-PCBs) were determined in Japanese human adipose tissues. Temporal trends were assessed by comparing data collected during 1970-1971, 1994-1996 and 2000. Mean TEQ levels of PCDD/Fs in human adipose tissue showed a significant decrease from 31.6 +/- 9.2 pg-TEQ/g fat wt in 1970-1971 to 11.9 +/- 7.4 pg-TEQ/g fat wt in 2000, and coplanar PCBs decreased from 35.4 +/- 21.9 pg-TEQ/g fat wt in 1970-1971 to 15.3 +/- 8.2 pg-TEQ/g fat wt in 2000. However, some PCB congener concentrations did not change during this time. A comparison of data using the latest PCB-TEQ showed no significant changes. Therefore, research on source characterization and monitoring of short-term temporal trends on these compounds should be carried out continuously.     

Concentrations of perfluorinated acids in livers of birds from Japan and Korea

Livers of birds collected from Japan and Korea (n = 83) were analyzed to determine the concentrations of perfluorooctanesulfonate (PFOS), perfluorooctanesulfonamide (FOSA), perfluorooctanoic acid (PFOA) and perfluorohexanesulfonate (PFHS). PFOS was found in the livers of 95% of the birds analyzed at concentrations greater than the limit of quantitation (LOQ) of 10 ng/g, wet weight. The greatest concentration of PFOS of 650 ng/g, wet weight, was found in the liver of a common cormorant from the Sagami River in Kanagawa Prefecture. Concentrations of PFOS in bird livers from Japan and Korea were within the ranges of values reported for those from the United States and certain European countries. PFOA and PFHS were found in 5-10% of the samples analyzed. The greatest concentrations of PFOA and PFHS in bird livers were 21 and 34 ng/g, wet weight, respectively. FOSA was found in all the samples (n = 10) of cormorants collected from the Sagami River in Japan. The greatest concentration of FOSA in cormorant liver was 215 ng/g, wet weight. There was no significant correlation between the concentrations of PFOS and FOSA in cormorants collected from the Sagami River. These results suggested that the distribution of FOSA is localized. No age- or gender-specific differences in fluorochemical concentrations could be discerned in birds.     

Remediation of arsenic-contaminated soils and washing effluents

Laboratory experiments were conducted to determine the distribution of various arsenic species in tailings and soils. Other specific goal of the tests were to evaluate the extraction efficiency of arsenic using alkaline or acid washing, to determine optimum operational parameters of alkaline washing, and to evaluate the arsenic precipitation of washing effluents by pH adjustment or ferric chloride addition. Alkaline washing using sodium hydroxide was found to be favorable in removing arsenic from tailings or soils having a higher portion of arsenic in the operationally defined crystalline mineral fraction of crystalline oxide and amorphous aluminosilicates. This is due to the ligand displacement reaction of hydroxyl ions with arsenic species and high pH conditions that can prevent readsorption of arsenic because predominant negatively charged crystalline oxides do not attract the negatively charged oxyanions. For tailings, sodium hydroxide had 10-20 times higher extraction efficiencies than hydrochloric- or citric acid. The optimum concentration of sodium hydroxide for soil washing was determined to be 200 mM for all samples, while the optimum ratios were 10:1 and 5:1 for tailings and field/river sedimentary soils, respectively. The washing effluent of river soil was effectively treated by adjusting pH to 5-6 with hydrochloric acid, resulting in arsenic concentrations of <50 microgl(-1). In the case of field soil effluent, an addition of ferric chloride with a minimum mass ratio of 11 (Fe/As) was needed to reduce the arsenic below 50 microgl(-1).     

Transport of a non-volatile contaminant in unsaturated porous media in the presence of colloids

Stable colloidal particles can travel long distances in subsurface environments and carry particle-reactive contaminants with them to locations further than predicted by the conventional advective-dispersive transport equation. When such carriers exist in a saturated porous medium, the system can be idealized as consisting of three phases: an aqueous phase, a carrier phase, and a stationary solid matrix phase. However, when colloids are present in an unsaturated porous medium, the system representation should include one more phase, i.e. the air phase. In the work reported, a mathematical model was developed to describe the transport and fate of the colloidal particles and a non-volatile contaminant in unsaturated porous media. The model is based on mass balance equations in a four-phase porous medium. Colloid mass transfer mechanisms among aqueous, solid matrix, and air phases, and contaminant mass transfer between aqueous and colloid phases are represented by kinetic expressions. Governing equations are non-dimensionalized and solved to investigate colloid and contaminant transport in an unsaturated porous medium. A sensitivity analysis of the transport model was utilized to assess the effects of several parameters on model behavior. The colloid transport model matches successfully with experimental data of Wan and Wilson. The presence of air-water interface retards the colloid transport significantly counterbalancing the facilitating effect of colloids. However, the retardation of contaminant transport by colloids is highly dependent on the properties of the contaminant and the colloidal surface.     

Interferometric Microwave Radiometers for High-Resolution Imaging of the Atmosphere Brightness Temperature Based on the Adaptive Capon Signal Processing Algorithm

Passive microwave remote sensing from satellites and ground stations has contributed uniquely, and substantially, to the study of atmospheric chemistry, meteorology, and environmental monitoring. As user requirements are raised, in terms of the accuracy and the spatial resolution, a mechanically scanning radiometer, with a real aperture, becomes impractical due to the requirement for a very large antenna size. However, an aperture synthesis interferometric radiometer presents a valuable alternative. The work presented in this paper was devoted to high spatial resolution imaging, using the 37 GHz band interferometric radiometer, developed by ourselves. The spatially adaptive Capon beamforming method was exploited for the imaging, which outperformed the conventional Fourier Transform method. We concluded that the high spatial resolution imaging of the brightness temperature of the atmosphere could be accomplished with an interferometric radiometer equipped with the developed Capon beamforming imaging algorithm.     

Enhanced photocatalytic degradation of lindane using metal–semiconductor Zn@ZnO and ZnO/Ag nanostructures

To achieve enhanced photocatalytic activity for the degradation of lindane, we prepared metal–semiconductor composite nanoparticles (NPs). Zn@ZnO core–shell (CS) nanocomposites, calcined ZnO, and Ag-doped ZnO (ZnO/Ag) nanostructures were prepared using pulsed laser ablation in liquid, calcination, and photodeposition methods, respectively, without using surfactants or catalysts. The as-prepared catalysts were characterized by using X-ray diffraction (XRD), field-emission scanning electron microscopy, high-resolution transmission electron microscopy, ultraviolet–visible (UV–vis) spectroscopy, and photoluminescence spectroscopy. In addition, elemental analysis was performed by energy dispersive X-ray spectroscopy. The obtained XRD and morphology results indicated good dispersion of Zn and Ag NPs on the surface of the ZnO nanostructures. Investigation of the photocatalytic degradation of lindane under UV–vis irradiation showed that Zn@ZnO CS nanocomposites exhibit higher photocatalytic activity than the other prepared samples. The maximum degradation rate of lindane was 99.5% in 40 min using Zn@ZnO CS nanocomposites. The radical trapping experiments verified that the hydroxyl radical (·OH) was the main reactive species for the degradation of lindane.     

Forest-based biomass supply potential and economics for the pellet production in Nepal

In the current study, the potential of forest-based biomass supply for the pellet production in Nepal is investigated. This study showed that about 2.76 million tonnes (Mt) biomass in the form of pellets are potentially available from forest-based biomass. Considering a processing capacity of 6 tonnes (t)/hr of a pellet plant, the production cost of the pellets was calculated to be $43.53/t. Pellets are generally used as fuel to produce thermal energy in industries, which helps to save the economy and the environment of the country.