Deforestation and cattle expansion in the Paraguayan Chaco 1987–2012

Regional Environmental Change - The dry forests of Latin America are among the most dynamic deforestation frontiers in the world and are important carbon and biodiversity reservoirs. Our knowledge...     

Solubility of antimony and other elements in samples taken from shooting ranges

The aim of this study was to determine whether or not Sb and other elements (Ni, Cu, Bi, Tl, and Hg) originating from Pb alloy (2-5 wt. % Sb) bullets become more soluble as a result of weathering and what mechanisms possibly control their solubility. Samples were taken from bank material behind the targets at seven Swiss shooting ranges. The samples were dried, sieved, analyzed, and subjected to leaching experiments. Total average concentrations of Sb ranged from 0.5 to 13.8 g kg(-1). In the leaching experiments, Sb was almost exclusively present in solution as the oxidized species Sb(V) in concentrations of up to 5 mg L(-1). The Ca mineral Ca[Sb(OH)6]2 is suggested to control dissolved Sb(V) concentrations in soils at high concentrations. Oxalate extractions suggested that approximately 50% of Sb [predominantly Sb(V)] in the <0.5-mm fraction was adsorbed to Fe (hydr)oxides and possibly other minerals, such as calcite, that are soluble at pH 2. However, it is possible that only a fraction of the oxalate-extractable Sb(V) is reversibly bound to mineral surfaces. It was concluded that the release of Sb is significant and considerably higher than the other elements under investigation and that the mechanisms controlling Sb mobility should be further investigated.     

Temporal and local trends of PCDD/F levels in cow's milk in Switzerland

Levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) were determined in 30 Swiss cow's milk samples collected at dairy farms in the vicinity to point sources, in rural/alpine areas distant to known sources, and from tanks in large industrial milk processing plants. The contaminant concentrations in samples collected in 2001 were compared to data from analyses conducted in 1984 and 1990/1991 at the same sites. In 2001, the PCDD/F levels in milk from farms near point sources (0.63+/-0.26 ng I-TEQ/kg milk fat) are slightly but significantly higher in than milk from remote areas (0.36+/-0.09 ng I-TEQ/kg milk fat). Consumer milk collected at the processing plants had intermediary levels (0.51+/-0.19 ng I-TEQ/kg milk fat). However, milk in 2001 was significantly less contaminated than the samples collected in 1990/1991 and 1984. This trend is particularly pronounced near point sources but is also apparent in consumer milk and milk from remote areas. No geographical gradient in the atmospheric input of PCDD/F in Switzerland was found. The reduction in PCDD/F levels in dairy milk is paralleled by and correlated to the remediation of known PCDD/F emitting industries, as enforced by federal authorities.     

Laboratory and field investigations of particulate and carbon monoxide emissions from traditional and improved cookstoves

We implemented a program in which emission characterization is enabled through collaborations between academic, US and international non-governmental entities that focus on evaluation, dissemination, and in-use testing, of improved cookstoves. This effort resulted in a study of field and laboratory emissions from traditional and improved biofuel cookstoves. We found that field measured particulate emissions of actual cooking average three times those measured during simulated cooking in the laboratory. Emission factors are highly dependent on the care and skill of the operator and the resulting combustion; these do not appear to be accurately reproduced in laboratory settings. The single scattering albedo (SSA) of the emissions was very low in both lab and field measurements, averaging about 0.3 for lab tests and around 0.5 for field tests, indicating that the primary particles are climate warming. Over the course of three summers in Honduras, we measured field emissions from traditional cookstoves, relatively new improved cookstoves, and “broken-in” improved cookstoves. We found that well-designed improved cookstoves can significantly reduce PM and CO emission factors below traditional cookstoves. For improved stoves, the presence of a chimney generally resulted in lower emission factors but left the SSA unaffected. Traditional cookstoves had an average PM emission factor of 8.2 g kg^?1 – significantly larger than previous studies. Particulate emission factors for improved cookstoves without and with chimneys averaged about 6.6 g kg^?1 and 4.5 g kg^?1, respectively. The elemental carbon (EC) fraction of PM varied significantly between individual tests, but averaged about 25% for each of the categories.     

Aerobic biodegradability of the calcium channel antagonist verapamil and identification of a microbial dead-end transformation product studied by LC-MS/MS

In recent years pharmaceuticals and personal care products have been detected in increasing concentrations in hospital effluents, sewage treatment plants (STP) as well as in different environmental compartments such as surface water, groundwater and soil. Little is known about the elimination of these substances during sewage treatment or about the formation of potential metabolites in the environment caused by bacterial biotransformation. To assess the biodegradability of the popular cardiovascular drug verapamil and the possible formation of potential microbial degradation products, two tests from the OECD series were used in the present study: the widely used Closed Bottle test (OECD 301 D) and the modified Zahn-Wellens test (OECD 302 B). In the Closed Bottle test, a screening test that simulates the conditions of an environmental surface water compartment, no biological degradation was observed for verapamil at concentrations of 2.33mgl(-1). In the Zahn-Wellens test, a test for inherent biodegradability which allows evaluation of aerobic degradation at high bacterial density, only a partial biological degradation was found. Analysis of test samples by high performance liquid chromatography coupled to multiple stage mass spectrometry (HPLC-MSn) revealed 2-(3,4-dimethoxyphenyl)-2-isopropyl-5-(methylamino)pentane nitrile, already known as D617 (Knoll nomenclature), a metabolite of mammalian metabolism, which is the major degradation product and dead-end transformation product of aerobic degradation of verapamil.     

Occurrence of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in Lake Maggiore (Italy and Switzerland)

Samples of air (gas and particulate phases), bulk deposition, aquatic settling material and sediments were collected in Lake Maggiore (LM) in order to determine their content of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Air (gas and particulate phases) concentrations were 0.5 pg m(-3), 80 pg m(-3), 13 pg m(-3) and 106 pg m(-3) for SigmaPCDD/Fs, SigmaPCBs, Sigma dioxin-like PCBs (DL-PCBs) and SigmaPBDEs, respectively. Deposition fluxes ranged from 0.7 ng m(-2) d(-1) for SigmaPCDD/Fs to 32 ng m(-2) d(-1) for SigmaPCBs. Aquatic settling material presented concentrations of 0.4 ng g(-1) dry weight (dw) for SigmaPCDD/Fs, 13 ng g(-1) dw for SigmaPCB, 3.4 ng g(-1) dw for SigmaDL-PCBs and 5.7 ng g(-1) dw for SigmaPBDEs. Mean sediment concentrations were 0.4 ng g(-1) dw for SigmaPCDD/Fs, 11 ng g(-1) dw for SigmaPCB, 3 ng g(-1) dw for SigmaDL-PCBs and 5.1 ng g(-1) dw for SigmaPBDEs. Similar PCDD/F and DL-PCB congener patterns in all the environmental compartments of LM point to an important, if not dominant, contribution of atmospheric deposition as source of these pollutants into LM. In contrast, PBDE congener distribution was not similar in the different environmental compartments. BDE 47 dominated air and settling material, while BDE 209 was the predominant congener in the bulk atmospheric deposition. Moreover, sediments showed two distinct PBDE congener profiles. Lower PBDE concentrated sediments were dominated by congeners 47 and 99, while BDE 209 dominated in higher PBDE concentrated samples. This suggests the influence of local sources as well as atmospheric input of PBDEs into LM.     

Modeling riverine nutrient transport to the Baltic Sea: a large-scale approach

We developed for the first time a catchment model simulating simultaneously the nutrient land-sea fluxes from all 105 major watersheds within the Baltic Sea drainage area. A consistent modeling approach to all these major watersheds, i.e., a consistent handling of water fluxes (hydrological simulations) and loading functions (emission data), will facilitate a comparison of riverine nutrient transport between Baltic Sea subbasins that differ substantially. Hot spots of riverine emissions, such as from the rivers Vistula, Oder, and Daugava or from the Danish coast, can be easily demonstrated and the comparison between these hot spots, and the relatively unperturbed rivers in the northern catchments show decisionmakers where remedial actions are most effective to improve the environmental state of the Baltic Sea, and, secondly, what percentage reduction of riverine nutrient loads is possible. The relative difference between measured and simulated fluxes during the validation period was generally small. The cumulative deviation (i.e., relative bias) [Sigma(Simulated - Measured)/Sigma Measured x 100 (%)] from monitored water and nutrient fluxes amounted to +8.2% for runoff, to -2.4% for dissolved inorganic nitrogen, to +5.1% for total nitrogen, to +13% for dissolved inorganic phosphorus and to +19% for total phosphorus. Moreover, the model suggests that point sources for total phosphorus compiled by existing pollution load compilations are underestimated because of inconsistencies in calculating effluent loads from municipalities.     

CDM Projects under the Kyoto Protocol: A Methodology for Sustainability Assessment – Experiences from South Africa and Uruguay

Under the Clean Development Mechanism (CDM) of the Kyoto Protocol, industrialised countries may finance greenhouse gases mitigation projects in developing countries. The Kyoto Protocol explicitly requires that the CDM shall assist developing countries to achieve sustainable development. However, a clear definition of sustainability for CDM projects is still debatable. MATA-CDM (Multi-Attributive Assessment of CDM Projects) is an approach that facilitates a quantitative assessment of potential projects regarding their contribution to sustainable development. This paper presents applications of MATA-CDM in two different countries. In South Africa, the application was done mainly for academic and demonstrative purposes, whereas in Uruguay it was implemented together with the responsible Designated National Authority (DNA). The work in both countries included the selection of sustainability criteria and measurable indicators. Experts weighted the criteria using personal interviews and a multi-stakeholder workshop. This method was applied to three potential CDM projects in South Africa and one in Uruguay. Results show that under the conditions of this study, the MATA-CDM approach yet fails to yield a perfect quantitative overall sustainability assessment of CDM projects but that several findings could be useful to further develop the approach with the aim to translate the vague term sustainable development to a mainstream project level. Valuable experience was in particular collected with different stakeholder processes to perform criteria weighting.