包覆型纳米零价铁的制备及其去除水中的活性艳蓝

采用流变相法,以FeSO4.7H2O∶KBH4=1∶2(摩尔比)为固相介质,0.06 g/mL CMC(羧甲基纤维素)水溶液为液相介质,固液比1∶2,反应2 h制备出包覆型纳米零价铁;采用XRD、TEM等手段对合成的纳米零价铁进行表征。探讨不同反应条件对包覆型纳米铁去除活性艳蓝的影响。实验结果表明,初始活性艳蓝(浓度100 mg/L)pH为5,包覆型纳米铁的投加量为6 g/L,反应时间为30 min时,活性艳蓝的去除率可达96%。通过研究机理,其吸附过程符合二级吸附动力学,降解过程符合一级反应动力学。     

气象条件对沈阳市环境空气臭氧浓度影响研究

利用2013年沈阳市环境空气监测点位臭氧监测数据,分析沈阳臭氧浓度变化特征,结合气象资料分析了其对臭氧浓度的影响。结果表明,沈阳市不同区域臭氧浓度变化特征基本一致。臭氧浓度日变化呈单峰趋势,最大值出现在14:00左右,最小值出现在6:00左右;臭氧浓度变化具有明显的季节特征,夏季臭氧浓度最高,春秋次之,冬季最低;臭氧浓度受温度、风速、湿度、能见度、天气情况影响,臭氧浓度变化是多因素共同作用的结果。     

太湖草型湖区沉积物中生物易降解物质组成与分布规律

为研究富营养化条件下草型湖区水生植物碎屑快速沉积对沉积物中有机质组成及营养状态的影响,选取太湖胥口湾为研究区,采集沉积物柱状样,探究沉积物中色素、碳、氮、磷及生物易降解物质的组成和分布规律.结果表明,胥口湾沉积物中色素、碳、氮、磷及生物易降解物质整体表现为表层富集特征,主要集中在沉积物表层15 cm;沉积物中氮负荷高于磷负荷,且存在显著的空间差异性;沉积物TN含量在127. 2～2 092. 8 mg·kg~(-1),沉积物TP含量在222. 1～528. 4 mg·kg~(-1),水生植物分布区(1 033. 6 mg·kg~(-1))氮负荷显著高于无植被区(325. 2 mg·kg~(-1)).沉积物中生物易降解物质以糖类(3. 7 mg·g-1)为主,其次是脂类(2. 8 mg·g-1)和蛋白质(2. 3 mg·g-1);水生植物碎屑残体是沉积物中营养盐和易降解有机质的主要来源,水生植物分布区沉积物中色素、碳、氮、磷及生物易降解有机质含量均显著高于无植被区(P 0. 01);胥口湾沉积物逐渐由中营养状态向富营养状态过渡,整体已经趋向于富营养化状态,在今后的湖泊管理和调控过程中需予以关注.     

官厅水库典型入库河流(洋河)表层沉积物重金属赋存形态特征

官厅水库曾是北京市重要的饮用水源地之一,洋河作为官厅水库重要入库河流,沉积物污染直接影响水库的水质安全.以洋河水系表层沉积物为研究对象,利用BCR三步连续提取法分析沉积物中Cd、Cr、Cu、Ni、Pb和Zn形态特征,并基于重金属形态的评价方法(次生相原生相分布比值法-RSP和风险评估指数法-RAC),评价了洋河水系表层沉积物中重金属的污染程度与风险水平.结果表明,在整体研究区域,6种重金属均以残渣态(B4态)为主,在次生相中(除B4以外的其他3种形态),Cd、Cu、Ni、Pb和Zn均以可还原态(B2态)为主,Cr以可氧化态(B3态)为主.在空间分布上,Cd在干流中游段和支流清水河段以B2态为主;Zn在干流中游段以B2态和弱酸提取态(B1态)为主,在支流清水河段以B2态为主.RSP结果表明,洋河水系表层沉积物中Cd和Zn为轻度污染,Cr、Ni、Cu和Pb无污染.但Cd和Zn在支流清水河段均为重度污染等级,其可能主要来源于区域化工原料及化学品制造行业.RAC结果表明,整体上洋河水系表层沉积物中Cd和Zn对水环境构成中等风险,Ni和Cu构成了低风险,而Cr和Pb基本无风险.     

重力沉淀对猪场污水的分离效果及其对沼气发酵的影响

采用重力沉淀法对猪场污水进行浓稀分离,并对分离得到的稀污水和浓污水进行沼气发酵实验,以考察沉淀分离对猪场污水沼气发酵的影响.结果表明,分离得到的稀污水体积占原污水的71.5%,相对于原污水,体积减少了28.5%,而COD、BOD5、SS、TN、TP浓度却分别减少了59.3%、64.4%、85.8%、36.7%和70.9%.分离得到浓污水体积占原污水体积的28.5%,却回收了70%以上COD与BOD5、95%以上的SS、65%的TN和85%的TP.绝大部分产沼气的底物都被分离到浓污水中,浓污水沼气产量占总产气量的85.5%.沉淀分离可以提高沼气发酵效率,在相同的发酵温度、COD负荷下,浓污水平均池容产气率为1.68L·L-1·d-1,比原污水和稀污水分别高25.3%、145%.通过重力沉淀,可以获得更好的升温效果,提高沼气发酵效率,沼渣沼液利用及污水达标处理也更加容易.     

类Fenton反应对偶氮染料橙黄II的脱色研究

以橙黄II染料溶液为研究对象,通过正交实验确定了Fe-NTA/H2O2构成的类Fenton反应中各影响因子的最佳操作条件为:[H2O2]=20 mmol/L,[Fe-NTA]=2.5 mmol/L,pH=3。同时考察了反应时间、溶液pH值、H2O2浓度、Fe-NTA浓度对脱色效率的影响。实验表明脱色反应在30 m in内基本完成,类Fenton试剂能在较宽的pH范围内保持较好的脱色效果,而且在pH=6时,类Fenton试剂比传统Fenton试剂的脱色效率提高约75%。增加双氧水浓度可以提高橙黄II溶液脱色率,但超过20 mmol/L后效果提高不明显。在0.5~2.5 mmol/L的范围内,Fe-NTA浓度对脱色效果的影响不显著。     

Prenatal diagnosis of congenital mesoblastic nephroma in mid-second trimester by sonography and magnetic resonance imaging

Although congenital mesoblastic nephroma (CMN) is a rare benign congenital renal tumor, it is the most common solid renal tumor in the newborn period. The most common presentation of congenital mesoblastic nephroma is polyhydramnios, and only one case with prenatal fetal hydrops has been previously reported. Prenatal diagnosis of CMN has previously been made on the basis of the findings of sonography in the third trimester, and magnetic resonance imaging (MRI)–based diagnosis has been reported recently. Here we report a case of prenatally diagnosed classical type CMN diagnosed at 22 + 3 weeks of gestation based on the findings of sonography and magnetic resonance imaging. The characteristic imaging findings in this case were fetal hydrops and polyhydramnios. To our knowledge, this is the youngest reported gestational age for prenatal diagnosis of CMN and it is the second case of CMN associated with fetal hydrops detected prenatally. Copyright © 2003 John Wiley & Sons, Ltd.     

新一代地球观测信息在天然气水合物研究中的应用展望

地球上蕴藏着巨大的天然气水合物(GasHydrates)矿藏,它可作为一种新的烃类资源来开发利用。天然气水合物中CH4的释放影响全球气候变化。同时,天然气水合物是一种潜在的环境灾害诱发因素。天然气水合物的研究与开发目前在国内外成为研究热点。新一代地球观测信息,如已发射成功的TERRA中的MODIS、MOPITT信息以及即将发射的化学星CHEM为天然气水合物的研究与开发提供了新的技术方法。中国气候观测系统中观测台站观测信息的共享,加速了开发利用新一代地球观测信息的速度,也必将促进新一代地球观测信息在天然气水合物研究中发挥更大的作用。     

Organotins and imposex in the rock shell, Thais clavigera, from oyster mariculture areas in Taiwan

The amounts of organotin compounds such as butyltins [sigma BTs: tributyl- (TBT), dibutyl- (DBT), monobutyl- (MBT)] and phenyltins [sigma PhTs: triphenyl- (TPhT), diphenyl- (DPhT) and monophenyl- (MPhT)] in rock shells, Thais clavigera, from the northern (Shiangsan), central (Lukang) and southern (Chiku) Taiwan oyster mariculture areas varied with season and location. High values of sigma BTs (mainly TBT) and low values of sigma PhTs (mainly TPhT) were found during winter (January 1999) at Shiangsan, while high amounts of sigma PhTs (mainly TPhT) and low sigma BTs (mainly TBT) were found during summer (August 1998) at Lukang. The snails were also affected by imposex. Imposex at Shiangsan, Lukang and Chiku increased from 67.1, 59.3 and 36.7% in summer to 100, 100 and 80% in winter, respectively. Relative penis size indices similar trend at Chiku site. No male displayed rock shells were found at Shiangsan and Lukang in winter. Linear correlations between pseudopenis length versus TBT (r = 0.7655, P < 0.001), DBT (r = 0.4253, P < 0.05), MBT (r = 0.5865, P < 0.01) and TPhT (r = -0.6160, P < 0.01) were obtained significant. Among 200 samples, significant positive correlations between length (pseudopenis/shell) ratio of female versus TBT (r = 0.6944, P < 0.005) and sigma BTs (r = 0.6413, r < 0.01) were also observed. The weak correlations between length (pseudopenis/shell) ratio of female versus DBT (r = 0.3085) and MBT (r = 0.4240, P < 0.1) and TPhT (-0.4917, P < 0.05; negative correlation) could indicate that DBT, MBT and TPhT have little or no effect on the development of imposex in rock shells.     

Development of emission factors for polyamide processing

Emission factors for selected volatile organic compounds (VOCs) and particulate material were developed during processing of commercial grades of polyamide 6, polyamide 66, and polyamide 66/6 resins. A small commercial-type extruder was used, and melt temperatures ranged from 475 to 550 degrees F. An emission factor was calculated for each substance measured and is reported as pounds released to the atmosphere per million pounds of polymer resin processed. Scaled to production volumes, these emission factors can be used by processors to estimate emission quantities from similar polyamide extrusion operations.