Frequency Control Characteristics of a Direct-Mode Untreated Sewage Source Heat Pump in the Heating Mode

An untreated sewage source heat pump system directly makes use of the urban raw sewage instead of that treated by a sewage plant. At present In China, most systems adopt the indirect mode for avoiding the harmful effect of the sewage on the heat pump unit. In this article a direct-mode untreated sewage source heat pump system, which shows less theoretical analysis of the mathematical model, is theoretically designed and analyzed to simulate the system dynamic characteristics in the heating mode. The results show that the system COP changes from 4.1 to 3.4 and the heating capacity from 9.5 to 15.3 kW when the sewage inlet temperature is 12°C and the frequency increases from 18 to 32 HZ. The condenser heat-transfer coefficient increases with the frequency reducing while the change trend of evaporator heat-transfer coefficient is the opposite. The highest values of them are 303 and 1617 W.m^?2?K^?1, respectively. The frequency control simulation supplies the operation adjustment with theoretical instructions and some reference values.     

温岭“6‧13”液化石油气槽罐车爆炸事故灾害效应分析∗

为了揭示浙江温岭“6?13”液化石油气(LPG)槽罐车特大爆炸事故的成灾机制和破坏威力,通过事故现场实地勘察并收集公开资料,发现此次事故的两次主要爆炸分别为沸腾液体扩展蒸汽爆炸(BLEVE)和蒸气云爆炸 (VCE);分别采用 BLEVE 热辐射模型、能量法和 Jarrett 模型对两次爆炸进行了爆炸威力和灾害效应分析。结果表明：BLEVE 事故中参与火球燃烧的 LPG 约为 7.59 t,火球热辐射死亡半径、重伤半径、轻伤半径分别为 93、124 和 200 m;BLEVE 的爆炸威力相当于 88.4 kg TNT 炸药;BLEVE 冲击波作用下人员的死亡半径和安全半径分别为 9.5 和 23.6 m,建筑物的安全半径为 55 m;VCE 事故的爆炸威力相当于 10.7 t TNT 炸药;参与 VCE 反应的 LPG 约为 1.05 t;通过 Braker 评估模型计算出的 VCE 事故中人员安全半径和死亡半径分别为 221 和 84 m,钢筋混凝土结构倒塌(严重损毁)半径为 94 m,瓦片掉落、钢筋混凝土墙产生裂缝对应的计算半径为 136 m,窗框的损坏半径为 273 m,建筑物的安全半径为 700 m,计算结果与实际破坏情况吻合较好。     

基于参数实测的水中重金属暴露的健康风险研究

以位于长江和淮河流域交界处河南泌阳县为研究区,利用ICP/MS分析城镇和农村居民饮用水中14种重金属含量,抽样选取2 500名城镇和农村不同性别和年龄的受试者作为研究对象,详细记录受试者3 d内的饮水和皮肤接触水的活动频率,并对有关饮水和皮肤暴露参数进行了测量.用暴露和健康风险模型计算了城镇和农村居民对14种重金属的经...     

北京及周边地区大气羰基化合物的时空分布特征初探

利用2,4-二硝基苯肼（DNPH）/HPLC方法,于2010年6月24日、7月22日、8月24日、9月14日（夏季）和2011年1月13日（冬季）,在北京及周边地区38个采样点组织5次同步观测,测定了大气中23种羰基化合物的浓度水平.观测结果表明,北京市各类站点夏季和冬季的总羰基化合物体积分数分别为（16.38±6.03）×10-9,（8.50±5.27）×10-9;周边城市夏季和冬季的体积分数分别为（13.19±5.71）×10-9,（13.05±2.44）×10-9.区域大气中最主要的羰基化合物是甲醛、乙醛和丙酮,三者约占总羰基化合物浓度的78%～91%.夏季羰基化合物的浓度水平明显高于冬季,并且上午09：00～12：00时段的浓度高于下午13：00～16：00时段的浓度.在空间分布上,北京市夏季羰基化合物的高值区主要集中在交通密集的主城区,而冬季受西北风影响呈现由西北向东南递增的趋势.夏季,机动车尾气对大气羰基化合物有显著的一次和二次贡献,同时在不利的气象条件影响下,造成城市地区羰基化合物的污染现象.冬季,大气羰基化合物以一次排放为主,燃煤和机动车可能是主要的污染源.     

Effect of chlorine content of chlorophenols on their adsorption by mesoporous SBA-15

Studies on the effect of the chlorine content of chlorophenols (CPs) on their adsorption from aqueous solution by mesoporous SBA-15 are important in understanding the mechanisms of CP adsorption. In this study, three CPs with different degrees of chlorine content (i.e., 2-chlorophenol, 2,6-dichlorophenol and 2,4,6-trichlorophenol) were investigated. The effects of parameters such as temperature and solution pH were studied. The results showed that CP adsorption by SBA-15 increased with increasing number of chlorine substituents and depended strongly on the temperature and solution pH. Thermodynamic parameters such as Gibbs free energy change (ΔG⁰), enthalpy change (ΔH⁰) and entropy change (ΔS⁰) were also calculated. By comparison of the adsorption coefficient of CPs with varying physical-chemical properties (size, hydrophobicity and electron density), we propose that hydrophobic interactions between CPs and the SBA-15 surface, as well as electron donor-acceptor (EDA) complexes between oxygen of the siloxane surface of SBA-15 (e^--donor) and the πup-system of the CPs (e^--acceptor), were dominant adsorption mechanisms.     

Two stages kinetics of municipal solid waste inoculation composting processes

IntroductionCompostingisanatureprocess,butmanyman inducedinnovativemeasureshavebeendevelopedtoacceleratecompostingefficiency .Variousspecializedseedinoculumshavebeenappliedforpracticalengineering(Biey ,2 0 0 0 ) .ThemicrobialfloraandthemassconcentrationofmicrobesinMSWcompostingprocessesunderlyinginoculationaredifferentinvariousstages(Lei,2 0 0 0 ;Akihito ,1998) .Atthesametime ,thelivingenvironmentofmicroorganismsisalsoincessantlychangingduetotheincreaseofmetabolizingproductionandconsumption…     

Factors affecting the distribution of microplastics in soils of China

● Microplastic (MP) abundance in soil of China was highly heterogeneous. ● MP abundance was higher near large rivers and central land affected by monsoons. ● MP abundance was correlated with longitude, mulching film, and average temperature. ● Factors suitable for predicting MP pollution using models were discussed. Microplastics (MPs) are found worldwide in high abundance, posing a potential threat to ecosystems. Despite the ubiquity of MPs in the environment, very little is known about the regional distribution of MPs and underlying factors affecting this distribution in the field, which likely include human activity, but also features of the environment itself. Here, out of a total of 1157 datapoints investigated in 53 Chinese studies, 9.68% datapoints were removed as outliers in the heterogeneity analysis. This review revealed that the abundance of MPs was highly heterogeneous. In addition, microplastic (MP) distribution maps based on China demonstrated that the highest abundance of MPs tended to occur near large rivers and central land affected by the intersection of two monsoons. The model-fitting and previous studies showed that MP abundance in China was correlated with longitude, agricultural mulching film usage per capita, temperature, and precipitation. However, due to the heterogeneity of MPs and the low matching degree between the current environmental data and the sampling points, this pattern was not as evident as reported in any single study. Factors affecting the distribution of MPs can not be captured by linear relationships alone, and systematic selection of suitable environmental factors and further model optimization are needed to explore the cause of MP pollution in soil. Overall, this review revealed an uneven distribution of MPs and serves as a reference for model prediction to assess and control plastic pollution in natural soil environments.     

Preliminary techno-economic analysis of three typical decentralized composting technologies treating rural kitchen waste: a case study in China

● Decentralized composting (DC) is a profitable KW treating technology. ● SAC and BEC were economically attractive in rural area, while HDC was unprofitable. ● KW handling subsidy plays a vital role in making DC profitable. ● SAC and BEC have great potential in promoting rural KW treatment. This study was designed to evaluate whether the decentralized rural kitchen waste (KW) composting technologies used in China can be widely applied. To this end, we completed a techno-economic analysis of three typical types of KW compositing, namely solar-assisted (SAC), bio-enhanced (BEC), and heat-dewatering composting (HDC). These evaluations revealed that all three technologies produce composting products that meet China’s organic fertilizer standard and that both SAC and BEC are economically self-sustaining and generate net profits (18824.94 and 17791.52 US$/a) and positive net present values (32133.11 and 25035.93 US$). Subsequent sensitivity analysis demonstrated that the KW-handling subsidy plays a critical role in making decentralized composting economically attractive. Based on these analyses, we believe that reducing the coverage area of SAC, reducing the operating cost of BEC and HDC, upgrading composting products, and strengthening secondary pollution control would aid in supporting the technological improvement of these processes. Moreover, providing appropriate subsidies and promulgating specific standards and policies for KW fertilizer are key strategies for decentralized rural KW composting management.     

基于数值风场的高层建筑对临近低层建筑群影响分析

针对高层建筑对低层建筑的风压、风速分布的影响问题,选用标准k-ε湍流模型,应用CFD数值方法模拟高层建筑影响下的低层建筑群的风场,侧重模拟分析了高层建筑的位置布局改变对低层建筑群风速及风压场的影响。分析结果表明:高层建筑对临近低层建筑群风场的影响显著,高层建筑的位置对低层建筑群风环境的影响较大。     

芳烃类化合物结构表征及-lgK_(ow)定量预测

为探寻芳烃类有机物结构与正辛醇/水分配系数(-lgK_(ow))的关系,应用分子顶点及顶点相互作用矢量对芳烃类有机物进行了结构表征.采用多元线性回归及逐步回归建立了3个定量结构-性质关系的-lgK_(ow)模型.经过比较,发现模型M3具有最佳模拟结果,此时模型的复相关系数为0.946,标准偏差为0.392.为检验模型的稳定性,采用留一法(leave-one-out)对模型进行了交互检验,复相关系数为0.920,标准偏差为0.429.