铝铁锡共聚物的合成及其特性研究

合成制备了铝铁锡共聚物,测定分析了其水解共聚合和熟化过程中的pH变化,并通过扫描电镜和混凝实验对共聚物的晶形貌像和絮凝作用进行了研究。结果表明：Sn^4 具有比Fe^3 ,Al^3 更强的水解活性,它有使共聚物的分子趋于均一的作用;铝铁锡共聚物的最佳配比为：NAl∶NFe∶NSn=5∶5∶3,最佳水解度B^*＝2．0,此共聚物具有比CPAFC更优良的絮凝性能。     

水合肼生产盐渣中氮化合物的去除

将水合肼生产盐渣分离碳酸钠后,通过吹脱、氧化等工艺降低饱和盐溶液的氮含量(以氨质量浓度计),以达到电解法制备氢氧化钠工艺对原料氯化钠的使用要求。中试试验结果表明:氧化反应最佳工艺条件为以次氯酸钠为氧化剂,次氯酸钠溶液中氢氧化钠质量浓度9.2g/L,次氯酸钠与初始氨的质量比为13,溶液pH 7～8,反应温度30～35℃;在此条件下氧化处理饱和盐溶液,处理后氨质量浓度由350.0 mg/L降至2.1 mg/L。将处理后的饱和盐溶液用于电解法制备氢氧化钠的生产过程,不仅可创造一定的经济效益,而且还解决了水合肼生产中的环境污染问题。     

Block Copolymers Containing (R)-3-Hydroxybutyrate and Isosorbide Succinate or (S)-Lactic Acid Mers

A new aliphatic block copolyester was synthesized in bulk from transesterification techniques between poly((R)-3-hydroxybutyrate) (PHB) and poly(isosorbide succinate) (PIS). Additionally, other two block copolyesters were synthesized in bulk either from transesterification reactions involving PHB and poly(l-lactide) (PLLA) or from ring-opening copolymerization of l-lactide and hydroxyl-terminated PHB, as result of a previous transesterification reactions with isosorbide. Two-component blends of PHB and PIS or PLLA were also prepared as comparative systems. SEC, MALDI-TOF mass spectrometry (MALDI-TOFMS), ¹H and ¹³C NMR spectroscopy, WAXD, solubility tests, and TG thermal analysis were used for characterization. The block copolymer structures of the products were evidenced by MALDI-TOFMS, ¹³C NMR, and WAXD data. The block copolymers and the corresponding binary blends presented different solubility properties, as revealed by solubility tests. Although the incorporation of PIS sequences into PHB main backbone did not enhance the thermal stability of the product, it reduced its crystallinity, which could be advantageous for faster biodegradation rate. These products, composed of PHB and PIS or PLLA sequences, are an interesting alternative in biomedical applications.     

Purification and Properties of Extracellular Poly(3-hydroxybutyrate) Depolymerase Produced by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis> 202

An extracellular poly(3-hydroxybutyrate) (PHB) depolymerase produced by a thermotolerant fungal soil isolate, Aspergillus fumigatus 202, was purified and characterized. Maximum PHB depolymerase production was obtained at the end of 48 h with initial medium pH 7.0 and 45 °C in Bushnell Haas Minerals medium containing PHB as sole source of carbon. The PHB depolymerase was purified using size exclusion chromatography to a fold purification of 20.62 and 61.62% yield. SDS-PAGE and isoelectric focusing revealed the molecular weight and pI of the purified enzyme as 63,744 Da and 4.2, respectively. N-terminal amino acid sequence of purified enzyme was HAXDAYLVK. This non-glycosylated enzyme was most active at pH 9.0 and 45 °C. Purified enzyme was inactivated by N-bromosuccinimide and dithiothreitol suggesting the involvement of tryptophan residues and disulfide bonds at its active site. Nonionic detergents like Tween 20, Tween 80 and Triton X-100 inhibited the enzyme activity. Ions like Ca⁺² and Mg⁺² (5 mM) increased the enzyme activity 1.5 times. Fe⁺² effectively inhibited the enzyme activity to 88% whereas Hg⁺² completely inhibited the enzyme.     

有机硅改性泥炭的吸附性能研究

采用三甲基氯硅烷处理泥炭(泥炭硅烷化),使其吸附性能得以改善。采用硅烷化泥炭自水溶液中吸附苯甲酸、苯甲醛和苯酚的等温线进行测定,对吸附过程的△G、△H和△s进行计算。试验结果表明：熵变是这类体系吸附过程的重要驱动力;硅烷化后的泥炭表面的疏水性明显增强,对水溶液中芳香族化合物的吸附量增大。     

1949—1994年中国洪水灾害成灾面积的时序分形特征

作者应用１９４９～１９９４年中国洪水灾情资料,重构了其嵌入相空间序列,探讨了其时序的分形特征,计算得到了分维数。研究表明：洪水灾害成灾面积的时序分布具有分形特征。研究结果为建立洪水灾害成灾面积的时序预测预报模型提供依据。     

基于GIS的区域干旱灾害风险区划研究

根据自然灾害风险理论,从致灾因子危险性、孕灾环境暴露性、承灾体易损性、防灾减灾能力等4个子系统选取指标,建立干旱灾害风险指数模型,结合GIS中自然断点分类法进行聚类分析,全面综合地分析各地区相关性和差异性.以淮河流域为研究实例,根据拟定的区划原则,采用“自下而上”和“自上而下”相结合的区划方法,将淮河流域分为6个旱灾风险分区,并对区划结果进行分析,为因地制宜地采取工程和非工程的防灾减灾措施,提供参考依据.     

汶川8．0级地震后中江县水库震害调查与分析

汶川8.0级地震对四川省水库造成了严重的震害和巨大的经济损失.依据德阳市水库地震灾害的现场科学考察资料,对德阳市中江县19座高危险情以上的水库土石坝的震损现象做了初步总结和分析.这些震损水库基本上都建于1950-1980年代,未经抗震设计,典型震害现象包括水库坝顶中部及坝轴线两侧纵向裂缝、坝体纵横向裂缝、大坝沉陷、坝坡滑坡和护坡滑动、坝脚渗漏、水库泄水构筑物震损、防浪墙震裂等震害现象.这说明了对中小型水库土石坝进行抗震设防的必要性,今后应深入研究中小型水库土石坝的震害机制,以指导水库土石坝的抗震设计.     

格栅加筋废弃钢渣的强度特性试验研究

提出了格栅加筋废弃钢渣的土工回填新技术,通过三轴固结排水试验研究格栅加筋废弃钢渣的抗剪强度特性。以玄武岩纤维格栅和江苏永钢废弃钢渣为例,分析在不同相对密实度、格栅加筋层数和围压下的格栅加筋废弃钢渣的应力应变特性,将格栅加筋废弃钢渣的抗剪强度特性与传统土、特殊土的抗剪强度特性以及前人研究的格栅或格室加筋特殊土的抗剪强度特性进行了比较。结果表明:各工况下的格栅加筋钢渣的黏聚力强度都远大于传统土类,且内摩擦强度也较高,达到砂类的摩擦强度;各工况下的格栅加筋钢渣的黏聚力强度弱于黄土与膨胀土,但其内摩擦强度则高于膨胀土与黄土。表明格栅加筋钢渣在较多工况下比传统土、特殊土以及格栅或格室加筋特殊土拥有更高的抗剪强度特性,可替换砂土应用于软基处理或加筋回填工程中。     

基于功率法的结构⁃TMD减震控制分析∗

建立了结构-TMD振动方程,推导了无控结构和带TMD受控结构基于功率表达的运动方程,分别解释并给出了各种功率表达参数的物理意义,推导了随机激励下结构耗能功率流均值的随机表达式,对比分析了基于功率法的结构-TMD优化方法与其他优化方法的优化分析结果,并对其减震控制效果进行了对比分析。结果表明,结构-TMD系统的参数可以通过耗能功率流随机分析方法所得均值进行优化,且通过功率法优化后,结构在减震效果上优于其他传统方法得到的结果,从耗能功率均值的随机分析和时程功率分析角度证明了TMD控制的有效性;TMD做功功率为负时对结构有控制效果,起吸收转移能量的作用,且功率幅值越大控制效果越好,做功功率为正时则相反。