Environmental estrogenic effects and gonadal development in wild goldfish (Carassius auratus)

Serum vitellogenin (VTG) contents of wild goldfish (Carassius auratus) were investigated as a sensitive biomarker for artificial estrogenic compounds in aquatic environments. Goldfish was sampled from a pristine area, a river situated 5 km downstream from a sewage treatment works (STW), and also from the Young-San River in Korea. The female yolk precursor protein VTG was not detected when gonadosomatic index (GSI) was less than 0.85%, while VTG levels of >10 microg/ml were found in males whose GSI was less than 1.53%. In male goldfish sampled from STW and the Young-San River, the higher VTG corresponded to lower GSI. This study suggested a trend that gonad development was connected to VTG levels in both sexes, and the application of GSI and histological analysis provide an attractive possibility that it could be included in the panel of markers used for estrogenic activity investigation of aquatic environments.     

Distribution and pollution sources of polycyclic aromatic hydrocarbons (PAHs) in reclaimed tidelands and tidelands of the western sea coast of South Korea

The wide-scale reclamation of tidal flats distributed throughout the western and southern coastal areas in Korea has been completed, in an effort to expand the available arable land. The present studies were conducted in order to characterize the concentrations and compositional patterns of selected PAHs, in order to obtain more information regarding environmental risk assessments for sustainable and environment-friendly agriculture in reclaimed tidelands and tidelands in South Korea. The PAH contents were low to moderate, relative to other urbanized regions of the world. Sigma PAHs ranged from 69.8 to 1,175.2 ng g(-1) in dry weight, with a mean value of 394.4 ng g(-1). Differences were observed in the Sigma PAHs concentrations between industrial complex areas and rural regions. The two dominant PAHs were identified as fluoranthene and pyrene. These compounds constituted 1.4 to 55.0% (mean, 33.4%) and 2.7 to 45.6% (mean, 22.0%) of the Sigma PAHs. Our correlation analysis revealed that the Sigma PAHs contents were associated significantly with the organic carbon content (R(2) = 0.86, P < 0.01) and the cation exchange capacity (CEC; R(2) = 0.89, P < 0.01) in the reclaimed tidelands and tidelands.     

Revised relative potency values for PCDDs, PCDFs, and non-ortho-substituted PCBs for the optimized H4IIE-luc in vitro bioassay

While the World Health Organization 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalency factors are useful estimates of relative potencies of mixtures when conducting risk assessments, they are not useful when comparing the results of bioassays such as the H4IIE-luc to concentrations of TCDD equivalents calculated from instrumental analyses. Since there are thousands of dioxin-like compounds (DLCs), one use of screening assays is to determine if all of the aryl hydrocarbon receptor (AhR) active DLCs in a mixture have been accounted for in instrumental analyses. For this purpose, bioassay-specific relative potency (ReP) values are needed. RePs of 21 polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls that exhibit effects mediated through the AhR were determined by use of the H4IIE-luc assay. Different values of RePs are derived, depending on the statistical, curve-fitting methods used to derive them from the dose–response relationships. Here, we discuss the various methods for deriving RePs from in vitro data and their assumptions and effects on values of RePs. Full dose–response curves of 2,3,7,8-TCDD and other representative DLCs were used to estimate effective concentrations at multiple points (e.g., EC20-50-80), which were then used to estimate ReP of each DLC to 2,3,7,8-TCDD.     

COMPLEX I and II Model Performance Evaluation in Nevada and New Mexico

The COMPLEX I and COMPLEX II Gaussian dispersion models for complex terrain applications have been made available by EPA. Various terrain treatment options under IOPT(25) can be selected for a particular application, one of which [IOPT(25) = 1] is an algorithm similar to that of the VALLEY model. A model performance evaluation exercise involving three of the available options with both COMPLEX models was carried out using SF⁶ tracer measurements taken during worst-case stable impaction conditions in complex terrain at the Harry Allen Plant site in southern Nevada. The models did not reproduce observed concentrations on an event by event basis, as correlation coefficients for 1-h concentrations of 0-0.3 were exhibited. When observed and calculated cumulative frequency distributions for 1-h and 3-h concentrations were compared, a close correspondence between observations and concentrations calculated with COMPLEX I, IOPT(25) = 2 or 3 was noted; both options consistently overestimated observed concentrations. With IOPT(25) = 1, upper percentile (maximum) values in the calculated frequency distribution exceeded the corresponding IOPT(25) = 2 or 3 value by roughly a factor of 2, and observed values by 2.5-5. COMPLEX II typically produced maximum values 2-4 times as great as COMPLEX I for the same terrain treatment option. From these results it is concluded that: 1) the physically unrealistic sector-spread approach used in VALLEY and COMPLEX I under stable impaction conditions is a surrogate for wind direction variation, and 2) the doubling of the plume centerline concentration due to ground reflection under terrain impingement conditions that is included in IOPT(25) = 1 is inappropriate.

These findings were found to be consistent with an analysis of noncurrent observed and calculated SO₂ χ/Q frequency distributions for 1, 3, and 24 hours near the Four Corners Plant in New Mexico. The comparison involved a four-year calculated χ/Q data set and a two-year observed χ/Q data set at the worst-case high terrain impact location near the plant.     

Development of freshwater sediment management standards for organic matters, nutrients, and metals in Korea

Korean water quality managers are required to promptly develop national assessment standards for freshwater sediment quality due to the Four Major River Restoration Project in Korea in 2009. We conducted this study to develop sediment management standards (SMSs), determining obviously and severely polluted sediment, which could have adverse impacts on water quality and aquatic ecosystem. The SMSs values were derived from the 95th percentile of concentration distribution for organic matter and nutrients in sediment quality database. For the SMSs of metals, foreign sediment quality guidelines (SQGs) were adopted. As a result, 13 % for loss on ignition (LOI), 1,600 mg/kg for total phosphorus (TP), and 5,600 mg/kg for total nitrogen (TN) were set as the SMSs for freshwater sediment in Korea. These values were higher than the range of heavily polluted sediment from USEPA Region 5 guideline derived by the similar approaches for the Great Lakes harbor sediments, and similar or lower than the severe effect level (SEL) from provincial sediment quality guideline (PSQG) of Ontario, Canada by screening level concentration (SLC) approach. However, SMSs in the present study are appropriate considering the concentration ranges and the Korean SMSs’ definition for freshwater sediments in Korea. The Puget Sound marine sediment cleanup screening level (CSL) in Washington State, USA were adopted as the Korean SMSs for As (93 mg/kg), Cd (6.7 mg/kg), Cr (270 mg/kg), Cu (390 mg/kg), Pb (530 mg/kg), and Zn (960 mg/kg) in freshwater sediments. Hg concentration (0.59 mg/kg) of CSL was too low to determine the polluted freshwater sediments in Korea, and the SEL of Ontario, Canada for mercury concentration (2 mg/kg) was selected as the SMS for Hg. These values were found reasonable through the assessment of applicability with the datasets from locations directly affected by obvious point sources. These results indicate that SMSs for organic matter, nutrient, and metals derived within the present study can successfully determine obviously and severely polluted sediment in Korea. However, the SMSs have limits to specifically determine the effects of polluted sediment on water quality and aquatic ecosystem in Korea. Thus, we will revise and specify SMSs considering those effects and further sediment quality assessment framework in the near future.     

Soil pollution assessment and identification of hyperaccumulating plants in chromated copper arsenate (CCA) contaminated sites, Korea

In recent decades, heavy metal contamination in soil adjacent to chromated copper arsenate (CCA) treated wood has received increasing attention. This study was conducted to determine the pollution level (PL) based on the concentrations of Cr, Cu and As in soils and to evaluate the remediative capacity of native plant species grown in the CCA contaminated site, Gangwon Province, Korea. The pollution index (PI), integrated pollution index (IPI), bioaccumulation factors (BAF_shoots and BAF_roots) and translocation factor (TF) were determined to ensure soil contamination and phytoremediation availability. The 19 soil samples from 10 locations possibly contaminated with Cr, Cu and As were collected. The concentrations of Cr, Cu and As in the soil samples ranged from 50.56-94.13 mg kg⁻¹, 27.78-120.83 mg kg⁻¹, and 0.13-9.43 mg kg⁻¹, respectively. Generally, the metal concentrations decreased as the distance between the CCA-treated wood structure and sampling point increased. For investigating phytoremediative capacity, the 19 native plant species were also collected in the same area with soil samples. Our results showed that only one plant species of Iris ensata, which presented the highest accumulations of Cr (1120 mg kg⁻¹) in its shoot, was identified as a hyperaccumulator. Moreover, the relatively higher values of BAF_shoot (3.23-22.10) were observed for Typha orientalis, Iris ensata and Scirpus radicans Schk, suggesting that these plant species might be applicable for selective metal extraction from the soils. For phytostabilization, the 15 plant species with BAF_root values > 1 and TF values < 1 were suitable; however, Typha orientalis was the best for Cr.     

Toxicity of the mosquito control insecticide phenothrin to three life stages of the grass shrimp (Palaemonetes pugio)

Phenothrin is a synthetic pyrethroid used as a contact insecticide in mosquito control programs. This study compared the toxicity of phenothrin to adult, larval and embryonic grass shrimp (Palaemonetes pugio) and examined oxidative stress responses in adult and larval grass shrimp. The adult 24-h LC50 was 0.341 μg/L (95 % confidence intervals 0.282-0.412) and the 96-h LC50 was 0.161 μg/L (95 % CI 0.128-0.203 μg/L). The larval 24-h LC50 was 0.50 μg/L (95 % CI 0.441-0.568) and the 96-h LC50 was 0.154 μg/L (95 % CI 0.139-0.170 μg/L). In the presence of sediment, the 24-h LC50 was 6.30 μg/L (95 % CI 5.00-7.44 μg/L) for adults and 0.771 μg/L (95 % CI 0.630-0.944) for larvae. The sublethal biomarkers glutathione and lipid peroxidase (LPx) were examined after 96-h phenothrin exposure at five concentrations, and there were no statistically significant differences in these levels in adults or larvae compared to controls. There was a significant downward trend in larval LPx levels. This research confirms that phenothrin is highly toxic to grass shrimp and suggests that both adult and larval grass shrimp are appropriate life stages for risk assessments.     

The use of failure mode and effects analysis to construct an effective disposal and prevention mechanism for infectious hospital waste

In recent times, the quality of medical care has been continuously improving in medical institutions wherein patient-centred care has been emphasized. Failure mode and effects analysis (FMEA) has also been promoted as a method of basic risk management and as part of total quality management (TQM) for improving the quality of medical care and preventing mistakes. Therefore, a study was conducted using FMEA to evaluate the potential risk causes in the process of infectious medical waste disposal, devise standard procedures concerning the waste, and propose feasible plans for facilitating the detection of exceptional cases of infectious waste. The analysis revealed the following results regarding medical institutions: (a) FMEA can be used to identify the risk factors of infectious waste disposal. (b) During the infectious waste disposal process, six items were scored over 100 in the assessment of uncontrolled risks: erroneous discarding of infectious waste by patients and their families, erroneous discarding by nursing staff, erroneous discarding by medical staff, cleaning drivers pierced by sharp articles, cleaning staff pierced by sharp articles, and unmarked output units. Therefore, the study concluded that it was necessary to (1) provide education and training about waste classification to the medical staff, patients and their families, nursing staff, and cleaning staff; (2) clarify the signs of caution; and (3) evaluate the failure mode and strengthen the effects.     

Changes in fungal population of fly ash and vinasse mixture during vermicomposting by Eudrilus eugeniae and Eisenia fetida: documentation of cellulase isozymes in vermicompost

Fly ash (FA) and vinasse (VN), two industrial wastes, are generated in huge amounts and cause serious hazards to the environment. In this experiment, different proportions of these two wastes were used as food for two epigeic earthworms (Eisenia fetida and Eudrilus eugeniae) to standardize the recycling technique of these two wastes and to study their effect on fungal especially cellulolytic fungal population, cellulase activity and their isozyme pattern, chitin content and microbial biomass of waste mixture during vermicomposting. Increasing VN proportion from 25% to 50% or even higher, counts of both fungi and cellulolytic fungi in waste mixtures were significantly (P ? 0.05) increased during vermicomposting. Higher cellulase activity in treatments having 50% or more vinasse might be attributed to the significantly (P ? 0.05) higher concentration of group I isozyme while concentrations of other isozymes (group II and III) of cellulase were statistically at par. Higher chitin content in vinasse-enriched treatments suggested that fungal biomass and fungi-to-microbial biomass ratio in these treatments were also increased due to vermicomposting. Results revealed that Eudrilus eugeniae and Eisenia fetida had comparable effect on FA and VN mixture during vermicomposting. Periodical analysis of above-mentioned biochemical and microbial properties and nutrient content of final vermicompost samples indicated that equal proportion (1:1, w/w) of FA and VN is probably the optimum composition to obtain best quality vermicompost.     

Enhancement of Tensile Strength and Flexibility of Polycaprolactone/Tapioca Starch Blends by Octadecylamine Modified Clay

Polycaprolactone/tapioca starch/octadecylamine modified clay (OMMT) nanocomposites were successfully prepared by melt blending. X-ray diffraction and transmission electron microscopy (TEM) of the products showed that they are nanocomposites of a mixture intercalated and exfoliated types. In addition, the TEM also revealed that the OMMT layers are homogeneously distributed in the polymer matrix. The presence of 1 php of OMMT improved the compatibility of the polymers in the blends which consequently increased the tensile strength of the blend of more than 60% and elongation at break of more than 1,000%.