Optimizing biomass pathways to bioenergy and biochar application in electricity generation,biodiesel production,and biohydrogen production

The current energy crisis, depletion of fossil fuels, and global climate change have made it imperative to find alternative sources of energy that are both economically sustainable and environmentally friendly. Here we review various pathways for converting biomass into bioenergy and biochar and their applications in producing electricity, biodiesel, and biohydrogen. Biomass can be converted into biofuels using different methods, including biochemical and thermochemical conversion methods. Determining which approach is best relies on the type of biomass involved, the desired final product, and whether or not it is economically sustainable. Biochemical conversion methods are currently the most widely used for producing biofuels from biomass, accounting for approximately 80% of all biofuels produced worldwide. Ethanol and biodiesel are the most prevalent biofuels produced via biochemical conversion processes. Thermochemical conversion is less used than biochemical conversion, accounting for approximately 20% of biofuels produced worldwide. Bio-oil and syngas, commonly manufactured from wood chips, agricultural waste, and municipal solid waste, are the major biofuels produced by thermochemical conversion. Biofuels produced from biomass have the potential to displace up to 27% of the world's transportation fuel by 2050, which could result in a reduction in greenhouse gas emissions by up to 3.7 billion metric tons per year. Biochar from biomass can yield high biodiesel, ranging from 32.8% to 97.75%, and can also serve as an anode, cathode, and catalyst in microbial fuel cells with a maximum power density of 4346 mW/m². Biochar also plays a role in catalytic methane decomposition and dry methane reforming, with hydrogen conversion rates ranging from 13.4% to 95.7%. Biochar can also increase hydrogen yield by up to 220.3%.

     

Effects of carbon nanotube and biochar on bioavailability of Pb,Cu and Sb in multi-metal contaminated soil

This study examined the effects of carbon nanotube and biochar on the bioavailability of Pb, Cu and Sb in the shooting range soils for developing low-cost remediation technology. Commercially available multi-walled carbon nanotube (MWCNT) and biochar pyrolyzed from soybean stover at 300 °C (BC) at 0.5, 1 and 2.5% (w w^?1) were used to remediate the contaminated soil in an incubation experiment. Both DTPA (bioavailable) and TCLP (leaching) extraction procedures were used to compare the metal/loid availability and leaching by the amendments in soil. The addition of BC was more effective in immobilizing mobile Pb and Cu in the soil than that in MWCNT. The BC reduced the concentrations of Pb and Cu in the soil by 17.6 and 16.2%, respectively. However, both MWCNTs and BC increased Sb bioavailability by 1.4-fold and 1.6-fold, respectively, in DTPA extraction, compared to the control. The toxicity characteristic leaching procedure (TCLP) test showed that the leachability of Pb in the soil amended with 2.5% MWCNT was 1.3-fold higher than that the unamended soil, whereas the BC at 2.5% decreased the TCLP-extractable Pb by 19.2%. Precipitation and adsorption via electrostatic and π–π electron donor–acceptor interactions were postulated to be involved in the interactions of Pb and Cu with surfaces of the BC in the amended soils, whereas ion exchange mechanisms might be involved in the immobilization of Cu in the MWCNT-amended soils. The application of BC derived from soybean stover can be a low-cost technology for simultaneously immobilizing bioavailable Pb and Cu in the shooting range soils; however, neither of amendments was effective in Sb immobilization.     

Impact of natural and calcined starfish (<Emphasis Type="Italic">Asterina pectinifera</Emphasis>) on the stabilization of Pb,Zn and As in contaminated agricultural soil

Metal stabilization using soil amendments is an extensively applied, economically viable and environmentally friendly remediation technique. The stabilization of Pb, Zn and As in contaminated soils was evaluated using natural starfish (NSF) and calcined starfish (CSF) wastes at different application rates (0, 2.5, 5.0 and 10.0 wt%). An incubation study was conducted over 14 months, and the efficiency of stabilization for Pb, Zn and As in soil was evaluated by the toxicity characteristic leaching procedure (TCLP) test. The TCLP-extractable Pb was reduced by 76.3–100 and 91.2–100 % in soil treated with NSF and CSF, respectively. The TCLP-extractable Zn was also reduced by 89.8–100 and 93.2–100 % in soil treated with NSF and CSF, respectively. These reductions could be associated with the increased metal adsorption and the formation of insoluble metal precipitates due to increased soil pH following application of the amendments. However, the TCLP-extractable As was increased in the soil treated with NSF, possibly due to the competitive adsorption of phosphorous. In contrast, the TCLP-extractable As in the 10 % CSF treatment was not detectable because insoluble Ca–As compounds might be formed at high pH values. Thermodynamic modeling by visual MINTEQ predicted the formation of ettringite (Ca₆Al₂(SO₄)₃(OH)₁₂·26H₂O) and portlandite (Ca(OH)₂) in the 10 % CSF-treated soil, while SEM–EDS analysis confirmed the needle-like structure of ettringite in which Pb was incorporated and stabilized in the 10 % CSF treatment.     

Effect of biosolid hydrochar on toxicity to earthworms and brine shrimp

The hydrothermal carbonization of sewage sludge has been studied as an alternative technique for the conversion of sewage sludge into value-added products, such as soil amendments. We tested the toxicity of biosolid hydrochar (Sewchar) to earthworms. Additionally, the toxicity of Sewchar process water filtrate with and without pH adjustment was assessed, using brine shrimps as a model organism. For a Sewchar application of 40 Mg ha^?1, the earthworms significantly preferred the side of the vessel with the reference soil (control) over side of the vessel with the Sewchar treatments. There was no acute toxicity of Sewchar to earthworms within the studied concentration range (up to 80 Mg ha^?1). Regarding the Sewchar process water filtrate, the median lethal concentration (LC50) to the shrimps was 8.1% for the treatments in which the pH was not adjusted and 54.8% for the treatments in which the pH was adjusted to 8.5. The lethality to the shrimps significantly increased as the amount of Sewchar process water filtrate increased. In the future, specific toxic substances in Sewchar and its process water filtrate, as well as their interactions with soil properties and their impacts on organisms, should be elucidated. Additionally, it should be identified whether the amount of the toxic compounds satisfies the corresponding legal requirements for the safe application of Sewchar and its process water filtrate.     

Prioritization of water management for sustainability using hydrologic simulation model and multicriteria decision making techniques

The objective of this study is to develop an alternative evaluation index (AEI) in order to determine the priorities of a range of alternatives using both the hydrological simulation program in FORTRAN (HSPF) and multicriteria decision making (MCDM) techniques. In order to formulate the HSPF model, sensitivity analyses of water quantity (peak discharge and total volume) and quality (BOD peak concentrations and total loads) are conducted and a number of critical parameters were selected. To achieve a more precise simulation, the study watershed is divided into four regions for calibration and verification according to landuse, location, slope, and climate data. All evaluation criteria were selected using the Driver–Pressure–State–Impact–Response (DPSIR) model, a sustainability evaluation concept. The Analytic Hierarchy Process is used to estimate the weights of the criteria and the effects of water quantity and quality were quantified by HSPF simulation. In addition, AEIs that reflected residents' preferences for management objectives are proposed in order to induce the stakeholder to participate in the decision making process.     

Determining the effectiveness of conventional and alternative coagulants through effective characterization schemes

Polymeric forms of metal coagulants in water treatment have become increasingly used due to their wider availability and reduction in cost. These specialized coagulant forms and products are claimed by manufacturers to be superior to conventional coagulants in particulate and/or organic removal with inherent advantages of lower alkalinity consumption and lesser sludge production. However, due to their proprietary nature, little is known about their chemical composition. To determine and understand the effectiveness of these alternative coagulants, a comprehensive study was undertaken to characterize metal coagulants, and to comparatively evaluate them on a well-characterized source water. The objective of this study was to provide a scheme for utilities that could be employed as a screening process and a method of selecting an appropriate coagulant based on raw water characteristics and insight into the coagulatability of the source water. Characterizations of coagulants included: (i) active metal content, (ii) anion content, (iii) acidity, (iv) alkalinity consumption, (v) charge reversal by colloidal titration, and (vi) molecular weight determination. A total of five poly-aluminum chlorides (PACl), along with a conventional coagulant (aluminum sulfate or alum) were evaluated. Results show that through the characterization scheme, an effective coagulant (conventional versus alternative) and coagulant type (among various PACl) can be chosen before undertaking time-consuming bench or pilot-scale evaluation.     

Accumulation of radionuclides released to a reactor discharge pond

Due to material degradation in tubing, the heat exchanger for the primary coolant of the 1 MW Tsing Hua Open-pool Reactor has minor leakage to the secondary cooling system since 1970. In the past 20 years, trace amounts of ^58,60Co, ⁵¹Cr, ¹³⁷Cs, ⁵⁴Mn, ⁴⁶Sc, and ⁶⁵Zn have leaked through the cooling system, accumulated, and eventually trapped in the discharge pond directly in front of the reactor. The distribution of these radionuclides in the mud at different depths and various locations in the pond was measured with standard procedures of radioactive soil sampling and counting techniques. Concentration of corrosion products, with no more than 40 KBq/Kg dry at the hottest spot, was contour-mapped to reveal the accumulation patterns of these trace level radioactive products at the end of the 20-year period.     

Biotreatment of hydrogen sulfide- and ammonia-containing waste gases by fluidized bed bioreactor

Gas mixtures of H2S and NH3 are the focus of this study of research concerning gases generated from animal husbandry and treatments of anaerobic wastewater lagoons. A heterotrophic microflora (a mixture of Pseudomonas putida for H2S and Arthrobacter oxydans for NH3) was immobilized with Ca-alginate and packed into a fluidized bed reactor to simultaneously decompose H2S and NH3. This bioreactor was continuously supplied with H2S and NH3 separately or together at various ratios. The removal efficiency, removal rate, and metabolic product of the bioreactor were studied. The results showed that the efficiency remained above 95% when the inlet H2S concentration was below 30 ppm at 36 L/hr. Furthermore, the apparent maximum removal and the apparent half-saturation constant were 7.0 x 10(-8) g-S/cell/day and 76.2 ppm, respectively, in this study. The element sulfur as a main product prevented acidification of the biofilter, which maintained the stability of the operation. As for NH3, the greater than 90% removal rate was achieved as long as the inlet concentration was controlled below 100 ppm at a flow rate of 27 L/hr. In the NH3 inlet, the apparent maximum removal and the apparent half-saturation constant were 1.88 x 10(-6) g-N/cell/day and 30.5 ppm, respectively. Kinetic analysis showed that 60 ppm of NH3 significantly suppressed the H2S removal by Pseudomonas putida, but H2S in the range of 5-60 ppm did not affect NH3 removal by Arthrobacter oxydans. Results from bioaerosol analysis in the bioreactor suggest that the co-immobilized cell technique applied for gas removal creates less environmental impact.