Photodegradation of the antimicrobial triclocarban in aqueous systems under ultraviolet radiation

This work aimed to investigate the effectiveness of ultraviolet (UV) radiation on the degradation of the antimicrobial triclocarban (TCC). We investigated the effects of several operational parameters, including solution pH, initial TCC concentration, photocatalyst TiO₂ loading, presence of natural organic matter, and most common anions in surface waters (e.g., bicarbonate, nitrate, and sulfate). The results showed that UV radiation was very effective for TCC photodegradation and that the photolysis followed pseudo-first-order kinetics. The TCC photolysis rate was pH dependent and favored at high pH. A higher TCC photolysis rate was observed by direct photolysis than TiO₂ photocatalysis. The presence of the inorganic ions bicarbonate, nitrate, and sulfate hindered TCC photolysis. Negative effects on TCC photolysis were also observed by the addition of humic acid due to competitive UV absorbance. The main degradation products of TCC were tentatively identified by gas chromatograph with mass spectrometer, and a possible degradation pathway of TCC was also proposed.     

Degradation of bisphenol A in aqueous solution by persulfate activated with ferrous ion

Degradation of bisphenol A (BPA) in aqueous solution was studied with high-efficiency sulfate radical (SO₄ ^?·), which was generated by the activation of persulfate (S₂O₈ ^2?) with ferrous ion (Fe²⁺). S₂O₈ ^2? was activated by Fe²⁺ to produce SO₄ ^?·, and iron powder (Fe⁰) was used as a slow-releasing source of dissolved Fe²⁺. The major oxidation products of BPA were determined by liquid chromatography-mass spectrometer. The mineralization efficiency of BPA was monitored by total organic carbon (TOC) analyzer. BPA removal efficiency was improved by the increase of initial S₂O₈ ^2? or Fe²⁺ concentrations and then decreased with excess Fe²⁺ concentration. The adding mode of Fe²⁺ had significant impact on BPA degradation and mineralization. BPA removal rates increased from 49 to 97 % with sequential addition of Fe²⁺, while complete degradation was observed with continuous diffusion of Fe²⁺, and the latter achieved higher TOC removal rate. When Fe⁰ was employed as a slow-releasing source of dissolved Fe²⁺, 100 % of BPA degradation efficiency was achieved, and the highest removal rate of TOC (85 %) was obtained within 2 h. In the Fe⁰–S₂O₈ ^2? system, Fe⁰ as the activator of S₂O₈ ^2? could offer sustainable oxidation for BPA, and higher TOC removal rate was achieved. It was proved that Fe⁰–S₂O₈ ^2? system has perspective for future works.     

活性炭吸附室内空气中挥发性有机化合物

活性炭吸附室内空气中挥发性有机化合物的１０％穿透时间与气相浓度及挥发性有机化合物的种类有关,通过对苯、甲苯和丙酮的实验研究,得出了由高浓度估算室内低浓度时炭床１０％穿透时间的经验公式ｔｂ,１＝ｔｂ,ｈ（Ｃ０,１／Ｃ０,ｈ）＾ａ,其中ａ值是与炭床性能及挥发性有机化合物种类有关的参数,可通过实验确定。     

氧化亚铁硫杆菌对亚铁离子的氧化及其动力学研究

采用9K培养基研究了氧化亚铁硫杆菌氧化Fe^2＋过程中,pH和氧化还原电位的变化规律,并对Fe^2＋的氧化过程进行动力学分析,确定了其反应级数及反应速率常数。结果表明,（1）在温度为30℃,摇床转速为150r／min的条件下,氧化亚铁硫杆菌的最佳接种量为10．0％;（2）Fe^2＋初始质量浓度在11．39～21．72g／L时,随着浓度的增大,Fe^2＋达到100％转化率需要的时间增加;（3）氧化亚铁硫杆菌对Fe^2＋的氧化可近似看作一级反应,反应速率常数为0．0527～0．0788h。     

脉冲电晕低温等离子体提高一氧化氮氧化效率的实验研究

提高一氧化氮（NO）的氧化效率对于提高生物法处理该类废气的净化效率具有重要意义。实验研究了低温等离子体在脉冲电晕条件下氧化废气中NO的过程,考察了不同峰值电压、氧气含量、气体停留时间和添加有机物等因素对提高NO氧化效率的影响。结果表明：低温等离子法可有效地提高NO的氧化效率,主要产物为NO₂;室温条件下,当进气NO浓度590 mg/m³、脉冲频率50 Hz时,增大峰值电压、气体停留时间和进气中的氧气含量可提高NO的氧化效率;在最适峰值电压15 kV,气体停留时间5 s时,NO氧化效率为20%;在进气NO中添加甲苯、乙醇后,NO氧化效率可增加至30%以上,甲苯的效果要好于乙醇。     

QSARs for the toxicity of polychlorinated dibenzofurans through DFT-calculated descriptors of polarizabilities, hyperpolarizabilities and hyper-order electric moments

DFT-B3LYP method with 6-31G(**) basis set was employed to fully optimize the electronic structures of 135 polychlorinated dibenzofurans and parent compound, namely dibenzofuran. It was demonstrated that polarizability anisotropy and mean polarizability could change sensitively and systematically with chlorine number and substitution pattern. And new quantitative structure-activity relationships (QSARs) focused on the binding affinities of aryl hydrocarbon receptor (AhR), aryl hydrocarbon hydroxylase (AHH) and 7-ethoxyresorufin O-deethylase (EROD) induction potencies of PCDFs were developed. It was concluded that polarizability anisotropy in conjunction with hyperpolarizabilties and hyper-order electric moments, e.g. octupole moments could well interpret the variation of toxicity of different congeners and dispersion interaction should be the leading form among various interactions. Although the terms of hyperpolarizabilities and hyper-order electric moments were not the same significant ones as polarizability anisotropy, the long-range interactions characterized by them should not be ignored in explaining the toxicity.     

Isolation and characterization of 1,2,4-trichlorobenzene mineralizing Bordetella sp. and its bioremediation potential in soil

A soil which has been polluted with chlorinated benzenes for more than 25 years was used for isolation of adapted microorganisms able to mineralize 1,2,4-trichlorobenzene (1,2,4-TCB). A microbial community was enriched from this soil and acclimated in liquid culture under aerobic conditions using 1,2,4-TCB as a sole available carbon source. From this community, two strains were isolated and identified by comparative sequence analysis of their 16S-rRNA coding genes as members of the genus Bordetella with Bordetella sp. QJ2-5 as the highest homological strain and with Bordetella petrii as the closest related described species. The 16S-rDNA of the two isolated strains showed a similarity of 100%. These strains were able to mineralize 1,2,4-TCB within two weeks to approximately 50% in liquid culture experiments. One of these strains was reinoculated to an agricultural soil with low native 1,2,4-TCB degradation capacity to investigate its bioremediation potential. The reinoculated strain kept its biodegradation capability: (14)C-labeled 1,2,4-TCB applied to this inoculated soil was mineralized to about 40% within one month of incubation. This indicates a possible application of the isolated Bordetella sp. for bioremediation of 1,2,4-TCB contaminated sites.     

地下水环境中甲基叔丁基醚运移过程的动力学模型

建立了地下水环境中甲基叔丁基醚(MTBE)运移过程的变系数动力学模型,并对模型进行了验证和参数灵敏度分析.模拟结果表明,地下水流速和阻滞系数对于MTBE的运移过程影响最为显著,而水动力弥散系数的影响较小,忽略其变化不会对预测地下水环境中污染物运移的环境动力学行为造成太大误差.由此得到的结论可定量研究MTBE在地下水环境中的对流.扩散特征,还可为MTBE污染地下水的预测预报、修复治理等研究提供科学依据.     

类柱试验中焚烧飞灰浸出特性研究

通过类柱试验研究焚烧飞灰的浸出规律.结果表明,随着流入系统中酸溶液体积的增加,系统pH先升高而后下降;在整个系统中,Ca的浸出质量浓度很高;Cr的浸出质量浓度要高于Cd、Cu、Zn、Pb和Ni,随着反应时间的推进,它们的浸出质量浓度都随着流入系统中酸溶液体积的增加而逐渐降低;在同一时间浸出质量浓度曲线上,从系统的上游到下游,浸出质量浓度呈增加趋势,如Cu的浸出质量浓度在系统上游(单元1)为60.2 μg/L,而在系统下游(单元10)为158.0 μg/L.