Heterogeneous and homogeneous catalytic ozonation of benzothiazole promoted by activated carbon: kinetic approach

Ozone oxidation combined with activated carbon adsorption (O(3)/AC) has recently started to be developed as a single process for water and wastewater treatment. While a number of aspects of aqueous ozone decomposition are well understood, the importance and relationship between aqueous ozone decomposition and organic contaminant degradation in the presence of activated carbon is still not clear. This study focuses on determining the contribution of homogeneous and heterogeneous reactions to organic contaminants removal in O(3)/AC system. Benzothiazole (BT) was selected as a target organic pollutant due to its environmental concern. A reactor system based on a differential circular flow reactor composed by a 19 cm(3) activated carbon fixed bed column and 1 dm(3) storage tank was used. Ozone was produced from pure and dry oxygen using an Ozocav ozone generator rated at 5 g O(3)h(-1). Experimental results show that BT removal rate was proportional to activated carbon dosage. Activated carbon surface contribution to BT oxidation reactions with ozone, increased with pH in absence of radical scavengers. The radical reaction contribution within the pH range 2-11 accounted for 67-83% for BT removal in O(3)/AC simultaneous treatment. Results suggest that at pH higher than the pH of the point of zero charge of the activated carbon dissociated acid groups such as carboxylic acid anhydrides and carboxylic acids present on activated carbon surface could be responsible for the observed increase in the ozone decomposition reaction rate. A simplified mechanism and a kinetic scheme representing the contribution of homogeneous and heterogeneous reactions on BT ozonation in the presence of activated carbon is proposed.     

From vineyards to feedlots: a fund-flow scanning of sociometabolic transition in the Vallès County (Catalonia) 1860–1956–1999

Regional Environmental Change - We analyse the changes to agricultural metabolism in four municipalities of Vallès County (Catalonia, Iberia) by accounting for their agroecosystem funds and...     

Analysis of two schemes using micro hydroelectric power (MHPs) in the Amazon with environmental sustainability and energy and economic feasibility

A major problem for sustainable development in the Amazon is the difficulty of supplying electric power to isolated communities, which represent a considerable share of the population. This problem has been a major obstacle to productive activities (especially extractive and agricultural) in such communities, thus significantly contributing to rural drift and creating social problems in larger cities. In that case, one way to supply electric power would be to use the huge network of small rivers in the region by implementing Micro Hydroelectric Power Plants (MHPs). However, this type of hydropower project requires a set of technical assessments in order to obtain better value for its cost-effectiveness from the perspective of sustainable development. Thus, based on a survey of energy demand and the local hydrological and topographical characteristics, two possible MHP designs for the hydrological site under analysis were suggested. Assessments of hydropower, economic and environmental aspects were developed. MHP designs were compared with the diesel generator design of the community under focus. Comparison showed that the MHP designs are feasible in terms of energy to meet local demand; economically, they are more feasible than the diesel generator and are environmentally sustainable, mainly because such designs involve low-head, run-of-river MHPs and the flooded areas were simulated and are not larger than 0.02 km². Therefore, the information provided by these assessments constitutes important data, serving as subsidies for MHP implementation projects, which shall contribute to sustainable development in the region.     

Toxicity of tire debris leachates

Data on the indicators of environmental impact of tire debris, originated from the tire abrasion on roads, are extremely scarce, while it is well known that tires may produce deleterious effects. Tire debris contains significant quantities of zinc (Zn) which may be released by tire rubber. We have used tire particles (TD) produced in laboratory from new rubber. Two sets of experiments were set up to obtain eluates. One set used 50 and 100 g/L TD to produce eluates at pH 3-7. The Zn quantity was measured with a Inductively Coupled Plasma-Atomic Emission Spectrometry. The eluates at 1%,10%,50%,100% concentrations in culture media were tested on Raphidocelis subcapitata, Daphnia magna and Xenopus laevis embryos (FETAX test). The other set of experiments was performed putting 250 mg/L TD in a column with glass beads to control particle dispersion during the elution process. We demonstrate that factors such as pH, size and particles aggregation deeply influence the elution process, that the amount of Zn leached from particles is related to their aggregation rather than their quantity. These results, even though do not reflect the real environmental toxicity of the leachates, can be successfully used for comparative purposes allowing an initial assessment of the potential effect of tire derived particles.     

Field Trial Assessment of Biological,Chemical, and Physical Responses of Soil to Tillage Intensity,Fertilization, and Grazing

Soil microbial populations can fluctuate in response to environmental changes and, therefore, are often used as biological indicators of soil quality. Soil chemical and physical parameters can also be used as indicators because they can vary in response to different management strategies. A long-term field trial was conducted to study the effects of different tillage systems (NT: no tillage, DH: disc harrow, and MP: moldboard plough), P fertilization (diammonium phosphate), and cattle grazing (in terms of crop residue consumption) in maize (Zea mays L.), sunflower (Heliantus annuus L.), and soybean (Glycine max L.) on soil biological, chemical, and physical parameters. The field trial was conducted for four crop years (2000/2001, 2001/2002, 2002/2003, and 2003/2004). Soil populations of Actinomycetes, Trichoderma spp., and Gliocladium spp. were 49% higher under conservation tillage systems, in soil amended with diammonium phosphate (DAP) and not previously grazed. Management practices also influenced soil chemical parameters, especially organic matter content and total N, which were 10% and 55% higher under NT than under MP. Aggregate stability was 61% higher in NT than in MP, 15% higher in P-fertilized soil, and also 9% higher in not grazed strips, bulk density being 12% lower in NT systems compared with MP. DAP application and the absence of grazing also reduced bulk density (3%). Using conservation tillage systems, fertilizing crops with DAP, and avoiding grazing contribute to soil health preservation and enhanced crop production.     

Wheat volatile emissions modified by top-soil chemical characteristics and herbivory alter the performance of neighbouring wheat plants

Plant emission of volatile organic compounds (VOCs) has a significant impact on arthropods and plants and alters important functions in the agroecosystems. Three field source–sink microcosm experiments evaluated variation in wheat plants volatile emissions and its impact on neighbouring wheat plants’ performance caused by genotype, aphid herbivory and soil nutrient availability due to different cropping histories. An electronic nose detected qualitative differences in volatile emissions. Two of the experiments established the source–sink relationships forcing the volatiles through pipes. In these experiments wheat genotype was introduced as a variable of the source plants. In the third experiment, the emissions of volatiles dispersed naturally affecting the neighbourhood only by proximity and wheat genotype was a controlled factor. Plant genotype, aphid attack and soil chemical changes caused by different cropping histories affected wheat volatile emissions despite independent variations in plant biomass or resource allocation. This is the first report of changes in distant plant biomass according to neighbouring plant genotype and agricultural history. Wheat VOCs emissions were associated with changes in soil organic C, Ca, Mg, total nitrogen and cation exchange capacity caused by the different cropping histories of the soils tested. Variability in total biomass and resource allocation increased due to changes in VOCs emissions promoted by longer cropping history or aphid feeding in two genotypes. When volatiles were naturally dispersed into the neighbourhood, tiller weight in the sink individuals depended on plant genotype and cropping history of its neighbours (i.e. VOCs source). These findings highlight that ecological and environmental consequences of agricultural practices are more complex than normally thought.     

Minimizing external indirect health costs due to aerosol population exposure: a case study from Northern Italy

Environmental Agencies require Decision Support Systems, in order to plan Air Quality Policies considering the cost of emission reduction measures and the human health effects (with related social costs). The use of Decision Support Systems is also useful to spread information to general public, explaining the effectiveness of proposed air quality plans. In this paper, a multi-objective approach to control PM10 concentration at a regional level is presented. The problem considers both the internal costs (due to the implementation of emission reduction measures) and the external costs (due to population exposure to high PM10 concentrations). To model PM10 concentrations, a single surrogate model is used for the entire domain, allowing the implementation of a very efficient optimization procedure. The surrogate model is derived through a set of 10 simulations, performed using a Chemistry Transport Model fed with different emission reduction scenarios. The methodology is applied to Northern Italy, a region affected by very high PM10 concentrations that exceed the limit values specified by the EU legislation.     

Heavy metals and organic carbon in sediments from the Tuy River basin,Venezuela

The Tuy River basin, located in north-central Venezuela with an annual average temperature of 27°C and precipitation of 140 cm, was selected to conduct a geochemical study of bottom sediments, with the object of establishing the natural and human influences in the abundance and distribution of Fe, Mn, Cr, Co, Cu, Ni, Pb, Zn and organic carbon. The basin is lithologically divided into two sub-basins, north and south. The north sub-basin drains a iow-grade metasedimentary terrain with a population density of 800 persons km^–2 and approximateiy 600 industrial sites, while the south sub-basin in underlain by metavolcanic and ultramafic rocks, with a population density of less than 10 persons km^–2.Stream bottom sediment samples (150) were collected during the years of 1979–1986 in 16 unpolluted sites and 13 polluted sites. The sediments were air dried at room temperature and sieved through a 120 stainless steel mesh (125 m). Samples of grain size smaller than 125 m were analysed, the heavy metals being determined by atomic absorption spectrometry and the organic carbon (Corg) by dry combustion.The higher concentrations of heavy metals and organic carbon found in the pristine areas were in the south sub-basin, especially in those areas with higher annual precipitation and tropical forest. This indicated that the metavolcanic and ultramafic rocks yield higher concentrations of heavy metals than the metasedimentary rocks. It was also noted that the higher concentrations of Cr and Ni are associated with the ultramafic rocks. The results obtained from the sediment samples collected in the polluted sites showed that the elements Pb, Zn and Corg are enriched up to 4 times as a result of ail the human activities taking place in the basin. Organic carbon is an excellent indicator of domestic wastewater, Pb and Zn are good indicators of the automotive traffic and industrial effluents. The concentrations of each heavy metal did not show any significant correlation with grain size fractions; however, the concentration of organic carbon did show a negative correlation with grain size. The lithological, climatic and vegetation influence in the abundance of heavy metals and organic carbon in stream sediments clearly indicates the necessity of establishing background levels for the area under study when carrying out studies in environmental geochemistry.     

Quantification of singlet oxygen and hydroxyl radicals upon UV irradiation of surface water

We measured the formation rate and the steady-state concentration of hydroxyl radicals and of singlet oxygen upon irradiation of lake water. There is controversy about the importance of singlet oxygen in the environmental photochemistry, but here we show that the steady-state concentration of ¹O₂ under irradiation can be higher by about two orders of magnitude compared to the hydroxyl radical. The higher occurrence of singlet oxygen in surface waters is mainly due to a higher rate of formation, because the transformation rate constants of ¹O₂ (collision with the solvent) and of ^·OH (reaction with dissolved compounds) are comparable.