Influence of construction and demolition waste management on the environmental impact of buildings

The purpose of this study is to quantify comparable environmental impacts within a Life Cycle Analysis (LCA) perspective, for buildings in which the first (Materials) and last (End of Life) life cycle stages are adjusted to several waste/material management options. Unlike most LCAs, the approach is “top-down” rather than “bottom-up”, which usually involves large amounts of data and the use of specific software applications. This approach is considered appropriate for a limited but expedient LCA designed to compare the environmental impacts of different life cycle options.Present results, based on real buildings measurements and demolition contractor activities, show that shallow, superficial, selective demolition may not result in reduced environmental impacts. Calculations actually show an increase (generally less than 5%) in most impact categories for the Materials and End of Life stages because of extra transportation needs. However, core material separation in demolition operations and its recycling and/or reuse does bring environmental benefits. A reduction of around 77% has been estimated in the climate change impact category, 57% in acidification potential and 81% in the summer smog impact (for the life cycle stages referred).     

Estimating the Relative Efficiency of Brazilian Publicly and Privately Owned Water Utilities: A Stochastic Cost Frontier Approach1

Abstract: This paper assesses cost efficiencies of Brazilian public and private companies of water supply. To measure the efficiency, we used a stochastic frontier model derived from the translog family – a specification similar to a Cobb‐Douglas including a quadratic term in log output. The model parameters are estimated by maximum likelihood using Brazilian data for the year 2002. Statistical inference leads to the conclusion that there is no evidence that private firms and public firms are significantly different in terms of efficiency measurements.     

Evaluation of Noise Pollution in Urban Parks

The present study provides an evaluation of noise pollution in six Urban Parks located in the city of Curitiba, Brazil. Equivalent noise levels (L _eq) were measured in 303 points (each point measured during 3 min) spread throughout the Parks. Measured values were confronted with local legislation (Law 10625) allowed limits, and the Parks were thus classified as “acoustically polluted or unpolluted”. Measured values were also evaluated according to international legislation: Decree no. 12 of the City Council of Rome, DIN 18005 for German cities, the World Health Organization, and the United States Environmental Protection Agency. Urban parks in the downtown area of Curitiba, surrounded by roads of heavy traffic and in the midst of intense commercial activities, do not satisfy any of the standards used. The most noise-polluted parks in Curitiba were the Public Walk Park and the Botanical Garden Park, with measured L _eq of 64.8 dB(A) and 67 dB(A).     

Construction materials as a waste management solution for cellulose sludge

Sustainable waste management system for effluents treatment sludge has been a pressing issue for pulp and paper sector. Recycling is always recommended in terms of environmental sustainability. Following an approach of waste valorisation, this work aims to demonstrate the technical viability of producing fiber-cement roof sheets incorporating cellulose primary sludge generated on paper and pulp mills.From the results obtained with preliminary studies it was possible to verify the possibility of producing fiber-cement sheets by replacing 25% of the conventional used virgin long fiber by primary effluent treatment cellulose sludge. This amount of incorporation was tested on an industrial scale. Environmental parameters related to water and waste, as well as tests for checking the quality of the final product was performed. These control parameters involved total solids in suspension, dissolved salts, chlorides, sulphates, COD, metals content. In the product, parameters like moisture, density and strength were controlled.The results showed that it is possible to replace the virgin long fibers pulp by primary sludge without impacts in final product characteristics and on the environment.This work ensures the elimination of significant waste amounts, which are nowadays sent to landfill, as well as reduces costs associated with the standard raw materials use in the fiber-cement industrial sector.     

Electrochemical wastewater treatment: influence of the type of carbon and of nitrogen on the organic load removal

Boron-doped diamond (BDD) and Ti/Pt/PbO₂ anodes were utilized to perform the electrodegradation of synthetic samples containing humic acid in the presence of different organic and inorganic carbon-containing and nitrogen-containing compounds. The influence of the chloride ion in the degradation process of the different synthetic samples was also assessed. The results showed that the anodic oxidation process can efficiently degrade recalcitrant compounds such as humic acid. The presence of carbonate in solution enhances the nitrogen removal, whereas it hinders the oxidation of the organic compounds. When organic nitrogen is present, it is converted to NH₄ ⁺, which in turn is oxidized to nitrate and to volatile nitrogen compounds. Hydroxyl radicals are more prone to oxidize the organic nitrogen than the ammonium nitrogen. The presence of chloride enhances the organic matter and nitrogen removal rates, BDD being the anode material that yields the highest removals.     

Single and combined effects of aluminum (Al<Subscript>2</Subscript>O<Subscript>3</Subscript>) and zinc (ZnO) oxide nanoparticles in a freshwater fish, <Emphasis Type="Italic">Carassius auratus</Emphasis>

The increasing use of nanoparticles (NPs) worldwide has raised some concerns about their impact on the environment. The aim of the study was to assess the toxicity of metal oxide nanoparticles, singly or combined, in a freshwater fish (Carassius auratus). The fish were exposed for 7, 14, and 21 days to different concentrations of NPs (10 μg Al₂O₃.L^?1, 10 μg ZnO.L^?1, 10 μg Al₂O₃.L^?1 plus 10 μg ZnO.L^?1, 100 μg Al₂O₃.L^?1, 100 μg ZnO.L^?1, and 100 μg Al₂O₃.L^?1 plus 100 μg ZnO.L^?1). At the end of each exposure period, antioxidant enzyme activity (catalase, glutathione-S-transferase, and superoxide dismutase), lipid peroxidation, and histopathology were assessed in the gills and livers of C. auratus. The results show an increase in catalase (CAT) and superoxide dismutase (SOD) activity in the gills and livers of fish, especially after 14 days of exposure to single and combined NPs, followed by a reduction at 21 days. An increase in glutathione S-transferase (GST) was observed in gills after 7 days for all tested NP concentrations (single and combined); while in livers, a significant increase was determined after 14 days of exposure to 100 μg.L^?1 of both single ZnO and Al₂O₃ NPs. Lipid peroxidation (LPO) significantly increased in gills after 7 days of exposure to 100 μg.L^?1 Al₂O₃ NPs (single or combined). In livers, LPO increased significantly after 7 days of exposure to all tested concentrations of both single ZnO and Al₂O₃ (except for 10 μg Al₂O₃.L^?1), and after 14 days of exposure to ZnO (10 and 100 μg.L^?1) and Al₂O₃ (100 μg.L^?1)_. The results from histological observations suggest that exposure to metal oxide NPs affected both livers and gills, presenting alterations such as gill hyperplasia and liver degeneration. However, the most pronounced effects were found in gills. In general, this study shows that the tested NPs, single or combined, are capable of causing sub-lethal effects on C. auratus, but when combined, NPs seem to be slightly more toxic than when added alone.     

Potential application of highly reactive Fe(0)/Fe3O4 composites for the reduction of Cr(VI) environmental contaminants

We describe the use of highly reactive Fe(0)/Fe3O4 composites for the reduction of Cr(VI) species in aqueous medium. The composites were prepared by simple mechanical alloying of metallic iron and magnetite in different proportions, i.e. Fe(0) 25, 50, 75 and 90wt%. While after 3h of reaction pure Fe(0) and pure Fe3O4 showed only a low reduction efficiency of 15% and 25% Cr(VI) conversion, respectively, the composites, in particular Fe(0)(25wt%)/Fe3O4, showed a remarkable activity with ca. 65% Cr(VI) conversion. Kinetic experiments showed a high reaction rate during the first 3h, which subsequently decreased strongly, probably due to a pH increase from 6 to 8. Experiments with composites based on Fe(0)/alpha-Fe2O3, Fe(0)/gamma-Fe2O3 and Fe(0)/FeOOH showed very low activities, suggesting that Fe(oct)2+ in the magnetite structure plays an important role in the reaction. Scanning and high resolution electron microscopies and M?ssbauer spectra (transmission and conversion electron M?ssbauer spectroscopy) indicated that the mechanical alloying process promotes a strong interaction and interface between the metallic and oxide phases, with the Fe(0) particles completely covered by Fe3O4 particles. The high efficiency of the composite Fe(0)/Fe3O4 for Cr(VI) reduction is discussed in terms of a special mechanism where an electron is transferred from Fe(0) to magnetite to reduce Fe(oct)3+ to Fe(oct)2+, which is active for Cr(VI) reduction.     

New insights on population genetic structure of <Emphasis Type="Italic">Delphinus delphis</Emphasis> from the northeast Atlantic and phylogenetic relationships within the genus inferred from two mitochondrial markers

The taxonomic status of common dolphins (Delphinus sp.) remains controversial despite the increased number of studies focusing on its populations. Two species are presently recognized, Delphinus delphis and D. capensis. Apart from a phylogeographic study of the genus Delphinus, genetic studies focusing specifically in the northeast (NE) Atlantic remain scarce. Following ecological and morphological evidence for the existence of different common dolphin morphotypes in the Portuguese coast, we examined the population structure of D. delphis from the NE Atlantic by comparing DNA sequences from two mitochondrial regions (control region and cytochrome b gene). Additionally, we compared the sequences obtained with existing sequences of D. delphis from the Azores, Black Sea, Canary Islands, Pacific Ocean, D. capensis and also two closely related delphinid species (Stenella coeruleoalba and Tursiops truncatus). In the analysis of the NE Atlantic populations, we found evidence for the existence of some level of genetic differentiation. In the broader phylogenetic analysis, D. delphis and D. capensis did not show reciprocal monophyly and we found a group of highly divergent individuals. We discuss the possibility for the existence of two divergent lineages that have evolved independently, a separate subspecies or events of introgressive hybridization. These findings could have important implications on a taxonomic level, although further investigation based on a larger geographical scale and on nuclear loci information will certainly elucidate the origin of these highly divergent individuals.