Feasibility of composting combinations of sewage sludge,olive mill waste and winery waste in a rotary drum reactor

Representative samples of the following biowastes typically generated in Castilla La Mancha (Spain) were composted using a pilot-scale closed rotary drum composting reactor provided with adequate control systems: waste from the olive oil industry (olive mill waste; OMW), winery–distillery waste containing basically grape stalk and exhausted grape marc (WDW), and domestic sewage sludge. Composting these biowastes was only successful when using a bulking agent or if sufficient porosity was supported. OMW waste composting was not possible, probably because of its negligible porosity, which likely caused anaerobic conditions. WDW was successfully composted using a mixture of solid wastes generated from the same winery. SS was also successfully composted, although its higher heavy metal content was a limitation. Co-composting was an adequate strategy because the improved mixture characteristics helped to maintain optimal operating conditions. By co-composting, the duration of the thermophilic period increased, the final maturity level improved and OMW was successfully composted. Using the proposed reactor, composting could be accelerated compared to classical outdoor techniques, enabling easy control of the process. Moisture could be easily controlled by wet air feeding and leachate recirculation. Inline outlet gas analysis helped to control aerobic conditions without excessive aeration. The temperature reached high values in a few days, and sufficient thermal requirements for pathogen removal were met. The correct combination of biowastes along with appropriate reactor design would allow composting as a management option for such abundant biowastes in this part of Spain.     

Impacts of urban forests on offsetting carbon emissions from industrial energy use in Hangzhou,China

This study quantified carbon storage and sequestration by urban forests and carbon emissions from energy consumption by several industrial sources in Hangzhou, China. Carbon (C) storage and sequestration were quantified using urban forest inventory data and by applying volume-derived biomass equations and other models relating net primary productivity (NPP) and mean annual biomass increments. Industrial energy use C emissions were estimated by accounting for fossil fuel use and assigning C emission factors. Total C storage by Hangzhou's urban forests was estimated at 11.74 Tg C, and C storage per hectare was 30.25 t C. Carbon sequestration by urban forests was 1,328, 166.55 t C/year, and C sequestration per ha was 1.66 t C/ha/year. Carbon emissions from industrial energy use in Hangzhou were 7 Tg C/year. Urban forests, through sequestration, annually offset 18.57% of the amount of carbon emitted by industrial enterprises, and store an amount of C equivalent to 1.75 times the amount of annual C emitted by industrial energy uses within the city. Management practices for improving Hangzhou's urban forests function of offsetting C emissions from energy consumption are explored. These results can be used to evaluate the urban forests' role in reducing atmospheric carbon dioxide.     

Analysis and residue levels of forchlorfenuron (CPPU) in watermelons

This paper describes the application of liquid chromatography-tandem mass spectrometry (LC/MS-MS) for analysis of residues of forchlorfenuron (CPPU), a new plant growth regulator, in watermelons, after a sample preparation step based on the buffered Quick, Easy, Cheap, Effective, Rugged and Safe extraction method. Analytical determinations were carried out in a triple quadrupole system fitted with an electrospray interphase operating in the positive ionisation mode (ESI+). Three simultaneous MS-MS transitions of the quasi-molecular ion m/z 248 (precursor ion) were monitored for data adquisition (248 > 129, 248 > 155, and 248 > 248), using the transition 248 > 129 for quantitation. Recovery studies on watermelons at levels of 1–200 μ g/kg, performing five replicates at each level and using bracketing single-level calibration with matrix-matched standards for quantitation, gave forchlorfenuron mean recoveries ranging from 82 to 106% with relative standard deviations (RSD) lower than 18%. The limit of determination was established at 1 μ g/kg. The method was applied to evaluate the persistence of forchlorfenuron residues in watermelons grown in plastic greenhouses, after applying an individual spray treatment to the flower ovary at the anthesis stage (45 μ g/flower and 60 μ g/flower for cv “Extazy” and cv “reina de corazones” watermelons, respectively). One month after treatment, 20 “Extazy” watermelon units (1.5–2 kg/unit) and 20 “Reina de corazones” watermelon units (4–5 kg/unit) were collected and analyzed individually. None of the samples contained forchlorfenuron residues higher than 1 μ g/kg.     

Comparison of different collection systems for sorted household waste in Spain

The purpose of this study was to identify the different selective collection systems implemented in Spanish cities and to analyse the efficiency and extent to which the targets proposed by current law are met in each case.After defining the indicators to be used to quantify the efficiency of a selective collection system, a survey was designed to gather the information needed to calculate them. This survey was sent out to all Spanish cities with a population of over 50,000 inhabitants.Four different selective collection systems were also identified. For each of the four cases the indicators were calculated and analyzed to determine which one was the best system. The best values were obtained from the system with separation in five fractions: paper/cardboard, glass and lightweight packaging at drop-off points, organic waste and mixed waste in kerbside bins. Two regression models (linear and exponential) were developed in systems with enough data to explain and predict the variation in the amounts of materials that were separated correctly into containers, depending on the distance between containers and citizens. Nevertheless, the percentages of separation at source of paper/cardboard and lightweight packaging are still far from reaching the targets set by law.     

Morphology,Chemical Characterization and Sources of Microplastics in a Coastal City in the Equatorial Zone with Diverse Anthropogenic Activities (Fortaleza city,Brazil)

Journal of Polymers and the Environment - The aim of the present study was to perform morphological and chemical characterizations of microplastics (MPs) found in seawater samples from the coast of...     

Inferring pollution records in sediment cores from transitional environments of Marquelia coast,Guerrero, Mexico

Environmental Science and Pollution Research - The vertical distribution pattern and concentrations of elements (Fe, Al, Ca, Mg, Mn, Cr, Cu, Ni, Co, Pb, Zn, and As) in the estuarine and lagoon...     

The invasibility of marine algal assemblages: role of functional diversity and identity

The emergence of the biodiversity-ecosystem functioning debate in the last decade has renewed interest in understanding why some communities are more easily invaded than others and how the impact of invasion on recipient communities and ecosystems varies. To date most of the research on invasibility has focused on taxonomic diversity, i.e., species richness. However, functional diversity of the communities should be more relevant for the resistance of the community to invasions, as the extent of functional differences among the species in an assemblage is a major determinant of ecosystem processes. Although coastal marine habitats are among the most heavily invaded ecosystems, studies on community invasibility and vulnerability in these habitats are scarce. We carried out a manipulative field experiment in tide pools of the rocky intertidal to test the hypothesis that increasing functional richness reduces the susceptibility of macroalgal communities to invasion. We selected a priori four functional groups on the basis of previous knowledge of local species characteristics: encrusting, turf, subcanopy, and canopy species. Synthetic assemblages containing one, two, three, or four different functional groups of seaweeds were created, and invasion by native species was monitored over an eight-month period. Cover and resource availability in the assemblages with only one functional group showed different patterns in the use of space and light, confirming true functional differences among our groups. Experimental results showed that the identity of functional groups was more important than functional richness in determining the ability of macroalgal communities to resist invasion and that resistance to invasion was resource-mediated.     

Urbanization and Its Effect On Runoff in the Whiteoak Bayou Watershed,Texas1

Abstract: The capacity of a watershed to urbanize without changing its hydrologic response and the relationship between that response and the spatial configuration of the developed areas was studied. The study was conducted in the Whiteoak Bayou watershed (223 km²), located northwest of Houston, Texas, over an analysis period from 1949 to 2000. Annual development data were derived from parcel data collected by the Harris County Appraisal District. Using these data, measures of the spatial configuration of the watershed urban areas were calculated for each year. Based on regression models, it was determined that the annual runoff depths and annual peak flows depended on the annual precipitation depth, the developed area and the maximum 12‐h precipitation depth on the day and day before the peak flow took place. It was found that, since the early 1970s, when the watershed reached a 10% impervious area, annual runoff depths and peak flows have increased by 146% and 159%, respectively. However, urbanization is responsible for only 77% and 32% of the increase, respectively, while precipitation changes are responsible for the remaining 39% and 96%, respectively. Likewise, an analysis of the development data showed that, starting in the early 1970s, urbanization in the watershed consisted more of connecting already developed areas than of creating new ones, which increases the watershed’s conveyance capacity and explains the change in its response. Before generalizing conclusions, though, further research on other urban watersheds with different urbanization models appears to be necessary.     

Communal burrowing in the hystricognath rodent, Octodon degus: a benefit of sociality?

We examined the hypothesis that a main benefit of group-living in the semifossorial rodent, Octodon degus (Rodentia: Octodontidae), is to decrease individual cost of burrow construction. We contrasted the digging behavior of groups of three same-sex, adult-sized individuals with that of solitary degus. The behavior of singles and trios was recorded inside a large terrarium partially filled with natural soil and under controlled conditions of food, light, and temperature. The observation that degus in groups do not decrease their burrowing time or frequency of digging compared with solitary diggers does not support the hypothesis that communal burrowing is a primary cause of degu sociality. On the other hand, the observation that degus in groups removed significantly more soil per capita than solitary digging degus, and that grouped individuals coordinated their digging – group members burrowed mostly in the same sites and formed digging chains –, suggests that social burrowing may potentially reduce the cost of burrow construction in the long term. We suggest that such long-term benefits will be a consequence rather than a cause of degu group-living. Received: 9 December 1999 / Received in revised form: 2 January 2000 / Accepted: 8 February 2000     

Two- and three-dimensional ultrasound in malformations of the medullary canal: report of four cases

A comparison between two-dimensional (2D), and three-dimensional (3D) ultrasonography was made in four fetuses diagnosed with neural tube defect (NTD) in the first half of pregnancy. 3D ultrasonography (orthogonal and multiplanar systems) proved to be an excellent complement to 2D, particularly when using orthogonal planes. When using the 3D multiplanar surface imaging system, excellent images of the malformations can be rapidly obtained. Copyright © 2001 John Wiley & Sons, Ltd.