Air pollution impacts of speed limitation measures in large cities: The need for improving traffic data in a metropolitan area

Assessing the effects of air quality management strategies in urban areas is a major concern worldwide because of the large impacts on health caused by the exposure to air pollution. In this sense, this work analyses the changes in urban air quality due to the introduction of a maximum speed limit to 80 km h^?1 on motorways in a large city by using a novel methodology combining traffic assimilation data and modelling systems implemented in a supercomputing facility. Albeit the methodology has been non-specifically developed and can be extrapolated to any large city or megacity, the case study of Barcelona is presented here. Hourly simulations take into account the entire year 2008 (when the 80 km h^?1 limit has been introduced) vs. the traffic conditions for the year 2007. The data has been assimilated in an emission model, which considers hourly variable speeds and hourly traffic intensity in the affected area, taken from long-term measurement campaigns for the aforementioned years; it also permits to take into account the traffic congestion effect. Overall, the emissions are reduced up to 4%; however the local effects of this reduction achieve an important impact for the adjacent area to the roadways, reaching 11%. In this sense, the speed limitation effects assessed represent enhancements in air quality levels (5–7%) of primary pollutants over the area, directly improving the welfare of 1.35 million inhabitants (over 41% of the population of the Metropolitan Area) and affecting 3.29 million dwellers who are potentially benefited from this strategy for air quality management (reducing 0.6% the mortality rates in the area).     

Organochlorine pesticide distribution in an organic production system for cow's milk in Chiapas,Mexico

The objective of this study was to evaluate the presence of organochlorine pesticides in samples of forage, soil, water, and milk in four units of an organic production system for cow´s milk (samples of forage, milk, soil, and water) in Tecpatan, Chiapas, Mexico. The organochlorine pesticides were extracted from forage, soil and water based on the USEPA (2005) guideline and from milk based on the IDF 1991 guideline. The pesticides were identified and quantified by gas chromatography with electron capture detector (CG-ECD). In general, the highest average concentration of total pesticides was found in the samples of milk and forage (311 ± 328 and 116.5 ±77 ng g^?1 respectively). Although, the production systems analyzed are organic, organochlorine pesticides were detected in all environmental samples (forage, soil, water, and organic milk). Although no values surpassed the defined limits of Mexican and International regulation it is advisable that a monitoring program of contaminants in these production systems is continued.     

A Systematic Framework for the Design and Implementation of a Quality Management Practice: The Case of a Consulting Engineering Company

Company productivity and competitiveness in today's marketplace requires creative design, innovation, and the reduction of nonconformances, which require costly rework and can damage a firm's reputation with its customers and potential customers. Using the International Organisation of Standardization's (ISO) 9000 and 14000 series of standards, the authors of this article walk readers through the rigorous process of obtaining upper management buy‐in and sponsorship and engaging workers in a bottom‐up approach to establish the procedures necessary to perform world‐class engineering services.     

Lead contamination of the Seine River, France: geochemical implications of a historical perspective

Four sediment cores collected in the Seine River basin and dated between 1916 and 2003 were analyzed for lead concentrations and isotopic composition. In all four cores, the measured Pb concentration (up to 460 mg kg⁻¹) lies significantly above the natural background (27-40 mg kg⁻¹), although a significant decrease (down to 75 mg kg⁻¹) was observed during the second half of the 20th century which can be explained by the reduction of lead emissions. The ²⁰⁶Pb/²⁰⁷Pb ratio measured in these samples indicates that the main source of Pb used in the Paris conurbation is characterized by a “Rio Tinto” signature (defined as ²⁰⁶Pb/²⁰⁷Pb = 1.1634 ± 0.0001). A high contribution, up to 25%, from the leaded gasoline (characterized by ²⁰⁶Pb/²⁰⁷Pb = 1.08 ± 0.02) is revealed in the Seine River downstream Paris, indicating that lead from the leaded gasoline is preferentially released to the river.The dominating Pb signature in the Paris conurbation that is currently sampled through incinerators fumes (²⁰⁶Pb/²⁰⁷Pb = 1.1550 ± 0.0005) and waste water treatment plant (²⁰⁶Pb/²⁰⁷Pb = 1.154 ± 0.002), represents a mixture of highly recycled lead from the Rio Tinto mine and lead from leaded gasoline (imprinted by the low ²⁰⁶Pb/²⁰⁷Pb of the Broken Hill mine). This signature is called “urban” rather than “industrial”, because it is clearly distinct from the Pb that is found in areas contaminated by heavy industry, i.e. the heavy industries located on the Oise River which used lead from European ores characterized by high ²⁰⁶Pb/²⁰⁷Pb ratios (∼1.18-1.19) and possibly a minor amount of North American lead (²⁰⁶Pb/²⁰⁷Pb ratios > 1.20). The “urban” signature is also found in a rural area upstream of Paris in the 1970’s. At the Seine River mouth in 2003, Pb with an urban signature represents 70% of the total Pb sediment content, with the 30% remaining corresponding to natural Pb.     

Comparative bioaccumulation kinetics of trace elements in Mediterranean marine sponges

While marine organisms such as bivalves, seagrasses and macroalgae are commonly used as biomonitors for the environment pollution assessment, widely distributed sponges received little attention as potential helpful species for monitoring programmes. In this study, the trace element and radionuclide bioaccumulation and retention capacities of some marine sponges were estimated in a species-comparative study using radiotracers technique. Six Mediterranean species were exposed to background dissolved concentrations of ^110mAg, ²⁴¹Am, ¹⁰⁹Cd, ⁶⁰Co, ¹³⁴Cs, ⁵⁴Mn, ⁷⁵Se and ⁶⁵Zn allowing the assessment of the uptake and depuration kinetics for selected elements. Globally, massive demosponges Agelas oroides, Chondrosia reniformis and Ircinia variabilis displayed higher concentration factor (CF) than the erectile ones (Acanthella acuta, Cymbaxinella damicornis, Cymbaxinella verrucosa) at the end of exposure, suggesting that the morphology is a key factor in the metal bioaccumulation efficiency. Considering this observation, two exceptions were noted: (1) A. acuta reached the highest CF for ^110mAg and strongly retained the accumulated metal without significant Ag loss when placed in depuration conditions and (2) C. reniformis did not accumulate Se as much as A. oroides and I. variabilis. These results suggest that peculiar metal uptake properties in sponges could be driven by specific metabolites or contrasting biosilification processes between species, respectively. This study demonstrated that sponges could be considered as valuable candidate for biomonitoring metal contamination but also that there is a need to experimentally highlight metal-dependant characteristic among species.     

Degradation of carbofuran and carbofuran-derivatives in presence of humic substances under basic conditions

The influence of humic aggregates in water solution upon the chemical stability of carbofuran (CF) and the carbofuran-derivatives, 3-hydroxy-carbofuran (HCF) and 3-keto-carbofuran (KCF), has been investigated in basic media. An inhibition upon the basic hydrolysis of 3-hydroxy-carbofuran and 3-keto-carbofuran (∼1.7 and ∼1.5-fold, respectively) was observed and it was rationalized in terms of the micellar pseudophase model. Nevertheless, non-significant effect upon the carbofuran stability was found in the presence of humic substances. These behaviors have been compared with the corresponding ones in other synthetic colloidal aggregates.     

Toxicity of silver nanoparticles to rainbow trout: A toxicogenomic approach

Silver (Ag) nanoparticles are used as antimicrobial adjuvant in various products such as clothes and medical devices where the release of nano-Ag could contaminate the environment and harm wildlife. The purpose of this study was to examine the sublethal effects of nano-Ag and dissolved Ag on Oncorhynchus mykiss rainbow trout. Hepatic Ag contents and changes in gene expression were monitored to provide insights on bioavailability and mode of action of both forms of silver. Fish were exposed to increasing concentrations (0.06, 0.6 and 6 μg L⁻¹) of nano-Ag (20 nm) and silver nitrate (AgNO₃) for 96 h at 15 °C. A gene expression analysis was performed in the liver using a DNA microarray of 207 stress-related genes followed by a quantitative polymerase chain reaction on a selection of genes for validation. The biochemical markers consisted of the determination of labile zinc, metallothioneins, DNA strand breaks, lipid peroxidation (LPO) and vitellogenin-like proteins. The analysis of total Ag in the aquarium water revealed that nano-Ag was mostly aggregated, with 1% of the total Ag being dissolved. Nevertheless, hepatic Ag content was significantly increased in exposed fish. Indeed, dissolved Ag was significantly more bioavailable than nano-Ag only at the highest concentration with 38 ± 10 and 11 ± 3 ng Ag mg⁻¹ proteins for dissolved and nano-Ag respectively. Exposure to both forms of Ag led to significant changes in gene expression for 13% of tested gene targets. About 12% of genes responded specifically to nano-Ag, while 10% of total gene targets responded specifically to dissolved Ag. The levels of vitellogenin-like proteins and DNA strand breaks were significantly reduced by both forms of Ag, but DNA break levels were lower with nano-Ag and could not be explained by the presence of ionic Ag. Labile zinc and the oxidized fraction of metallothioneins were increased by both forms of Ag, but LPO was significantly induced by nano-Ag only. A discriminant function analysis revealed that the responses obtained by biochemical markers and a selection of ten target genes were able to discriminate completely (100%) the effects of both forms of Ag. Exposure to nano-Ag involved genes in inflammation and dissolved Ag involved oxidative stress and protein stability. Hence, the toxicity of Ag will differ depending on the presence of Ag nanoparticles and aggregates.     

Gene expression of heat shock protein 70, interleukin-1β and tumor necrosis factor α as tools to identify immunotoxic effects on Xenopus laevis: a dose-response study with benzo[a]pyrene and its degradation products

The exposure to benzo[a]pyrene (B[a]P) results in an alteration of immune function in mammals and fish, and the analysis of cytokine mRNA levels has been suggested for predicting the immunomodulatory potential of chemicals. To obtain evidence of the innate immune responses to B[a]P in Xenopus laevis, the present study monitored the mRNA expression of interleukin 1-β (IL-1β), tumor necrosis factor α (TNF-α) and heat shock protein 70 (HSP70) in a laboratorial exposure. Tadpoles exposed to 8.36, 14.64, 89.06 and 309.47 μg/L of B[a]P,were used for detecting hsp70, IL-1β and TNF-α mRNA induction. A dose-response increase in the expression of hsp70 and IL-1β mRNA was found. The results of this study confirmed the use of hsp70 and IL-1β, but not TNF-α, as sensitive indicators of immunotoxic effect of B[a]P in X. laevis. Further research would be required for the validation of these endpoints.