Microfibrous mesh coated with titanium dioxide: a self-sterilizing,self-cleaning filter

The utility of metal microfibrous mesh coated with titanium dioxide as a self-sterilizing, self-cleaning filter for air is explored. The low-cost mesh is produced via a roll-to-roll process similar to paper manufacturing. The titanium dioxide is applied by spraying an aqueous suspension of the photocatalyst on the surface of the mesh using an airbrush. Photocatalytic activity comparable to a powder layer is achieved at one quarter of the mass loading. The coating enhanced the separation of Escherichia coli (E. coli) from aqueous suspension, but also led to an increase in pressure drop in an air stream flowing through the mesh. The self-cleaning property of the coated mesh is established by recovery of pressure drop performance lost due to biofilm buildup. This is accomplished via a photocatalytic regeneration process involving exposing the mesh to ultraviolet light in air. Oxidation is confirmed by monitoring CO2 evolution during the regeneration. Scanning electron photomicrographs also provide visual evidence of successful regeneration via photocatalysis.     

Characterisation of airborne particles collected within and proximal to an opencast coalmine: South Wales,U.K

Airborne particulate matter has been collected from within,and proximal to, an opencast coal mine in south Wales. Thiswork forms the first part of a three year project to collectand characterise, then determine the possible toxicology ofairborne particles in the south Wales region. High-resolutionField Emission SEM has shown that the coal mine dusts consistlargely of an assemblage of mineral grains and vehicle exhaustparticles. SEM-EDX has shown that the mineralogical make-up ofthe PM10 is complex, heterogeneous, and constantly changing.These findings are supported by analytical TEM-EPXMA.However, patterns can be determined relating the mineralogicalcomposition of the airborne particles to collection locationsand mining activities within the opencast. At our studyopencast, Park Slip West, quartz, which has known healtheffects, never exceeded 30% of the total collection mass, andaverage levels were much less. Vehicle exhaust emissions wasthe largest source in terms of particle numbers. The mass ofairborne particulate matter within the pit averagedapproximately twice that of outside the pit: importantlyhowever, this higher mass was due to relatively large, andnon-respirable, mineral grains. This study demonstrates that the physicochemical andmineralogical characterisation of airborne particles frommining and quarrying is essential to quantify the respirablefraction, and to identify potentially hazardous componentswithin the PM10.     

Radioactive impact in sediments from an estuarine system affected by industrial wastes releases

A big fertilizer industrial complex and a vast extension of phosphogypsum piles (12 km2), sited in the estuary formed by the Odiel and Tinto river mouths (southwest of Spain), are producing an unambiguous radioactive impact in their surrounding aquatic environment through radionuclides from the U-series. The levels and distribution of radionuclides in sediments from this estuarine system have been determined. The analyses of radionuclide concentrations and activity ratios have provided us with an interesting information to evaluate the extension, degree and routes of the radioactive impact, as well as for the knowledge of the different pathways followed for the radioactive contamination to disturb this natural system. The obtained results indicate that the main pathway of radioactive contamination of the estuary is through the dissolution in its waters of the radionuclides released by the industrial activities and their later fixation on the particulate materials. Tidal activity also plays an important role in the transport and homogenization along the estuary of the radioactivity released from the fertilizer plants.     

Atmospheric BTEX-concentrations in an area with intensive street traffic

The major threat to clean air in developed and industrializing countries is now posed by traffic emissions. The effects of traffic road modifications on the air quality are, however, rarely reported in the literature. The aim of this study was to determine the influence of the modernization and renovation of a traffic artery in the region of Mortsel (Antwerp, Belgium) on the concentration of volatile organic compounds such as: benzene, toluene, ethylbenzene and m-, p-, o-xylenes (BTEX). The original goal of the reconstruction works was to reduce the traffic lanes of one of the busiest streets in Antwerp, in order to discourage the road traffic and in consequence also to improve the air quality in this region. The average concentrations of BTEX before these works in 2003 were: 1.6, 7.0, 0.9, 2.3, and 0.9 μg/m³, for benzene, toluene, ethylbenzene, m + p xylenes, and o-xylene, respectively. However, after the completion of the works, in 2005, they were slightly higher: 2.5, 9.5, 1.6, 3.4, and 1.3 μg/m³, respectively. The scatter plots of benzene against toluene, ethylbenzene and xylenes in 2003 and 2005 showed very good correlations. This fact indicated that all of the measured compounds originated from the same source, namely the road traffic. Moreover, the data obtained from an air-monitoring station at less than 6 km distance from the sampling site (operated by the Flemish Environment Agency, and located in Borgerhout, Antwerp), confirmed the lack of influence of background concentrations of BTEX. The obtained results led to the conclusion that the reduction of the number of traffic lanes had apparently increased the traffic jams and also increased the emission from cars. Therefore, these modernization works had even a negative impact on the local concentration of traffic-related pollutants as BTEX.     

Degradation and sorption of metribuzin and primary metabolites in a sandy soil

Leaching to the ground water of metabolites from the herbicide metribuzin [4-amino-6-(1,1-dimethylethyl)-3-(methylthio)-1,2,4-triazin-5-one] has been measured in a Danish field experiment in concentrations exceeding the European Union threshold limit for pesticides at 0.1 microg/L. In the present work, degradation and sorption of metribuzin and the metabolites desamino-metribuzin (DA), diketo-metribuzin (DK), and desamino-diketo-metribuzin (DADK) were studied in a Danish sandy loam topsoil and subsoil from the field in question, using accelerated solvent extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. Fast dissipation of metribuzin and the metabolites was observed in the topsoil, with 50% disappearance within 30 to 40 d. A two-compartment model described degradation of metribuzin and DA, whereas that of DADK could be described using first-order kinetics. Part of the dissipation was probably due to incorporation into soil organic matter. Degradation in subsoil occurred very slowly, with extrapolated half-lives of more than one year. Sorption in the topsoil followed the order DA > metribuzin > DK > DADK. Subsoil sorption was considerably lower, and was hardly measurable for metribuzin and DK. Abiotic degradation was considerably higher in the topsoil than the subsoil, especially concerning the de-amination step, indicating that organic matter may be related to the degradation process. The present results confirm observations of metribuzin and transformation product leaching made in the field experiment and demonstrate the need for knowledge on primary metabolites when assessing the risk for pesticide leaching.     

Radioactivity concentration in liquid and solid phases of scale and sludge generated in the petroleum industry

Scales and sludge generated during oil extraction and production can contain uranium, thorium, radium and other natural radionuclides, which can cause exposure of maintenance personnel. This work shows how the oil content can influence the results of measurements of radionuclide concentration in scale and sludge. Samples were taken from a PETROBRAS unit in Northeast Brazil. They were collected directly from the inner surface of water pipes or from barrels stored in the waste storage area of the E&P unit. The oil was separated from the solids with a Soxhlet extractor by using aguarras at 90+/-5 degrees C as solvent. Concentrations of 226Ra and 228Ra in the samples were determined before and after oil extraction by using an HPGe gamma spectrometric system. The results showed an increase in the radionuclide concentration in the solid (dry) phase, indicating that the above radionuclides concentrate mostly in the solid material.     

(210)Pb content in natural gas pipeline residues ("black-powder") and its correlation with the chemical composition

The present work was carried out to assess the (210)Pb content in "black-powder" found in pigging operations on gas pipelines in Brazil, in particular, on the Campos Basin gas pipeline. Additionally, the chemical composition of such deposits was determined and an eventual correlation with (210)Pb concentration evaluated. Typical "black-powder" generated in the natural gas pipeline from Campos Basin oilfield contains mainly iron oxide ( approximately 81%) and residual organic matter ( approximately 9%). The (210)Pb content ranges from 4.9 to 0.04k Bqkg(-1) and seems to be inversely correlated with the distance to the platforms. On the other hand, (226)Ra concentration is higher on the pipeline branch between the platform and the onshore installations. (228)Ra was only observed in few samples, in particular, in the samples with the highest (226)Ra content.     

A comparative study of (239,240)Pu in soil near the former Rocky Flats Nuclear Weapons Facility, Golden, CO

The Rocky Flats Nuclear Weapons Plant near Golden, CO released plutonium into the environment during almost 40 years of operation. Continuing concern over possible health impacts of these releases has been heightened by lack of public disclosure of the US Department of Energy (DOE) activities. A dose reconstruction study for the Rocky Flats facilities, begun in 1990, provided a unique opportunity for concerned citizens to design and implement field studies without participation of the DOE, its contractors, or other government agencies. The Citizens Environmental Sampling Committee was formed in late 1992 and conducted a field sampling program in 1994. Over 60 soil samples, including both surface and core samples, were collected from 28 locations where past human activities would have minimal influence on contaminant distributions in soil. Cesium-137 activity was used as a means to assess whether samples were collected in undisturbed locations. The distribution of plutonium (as (239,240)Pu) in soil was consistent with past sampling conducted by DOE, the Colorado Department of Public Health and Environment, and others. Elevated levels of (239,240)Pu were found immediately east of the Rocky Flats Plant, with concentrations falling rapidly with distance from the plant to levels consistent with background from fallout. Samples collected in areas south, west, and north of the plant were generally consistent with background from fallout. No biases in past sampling due to choice of sampling locations or sampling methodology were evident. The study shows that local citizens, when provided sufficient resources, can design and implement technical studies that directly address community concerns where trust in the regulated community and/or regulators is low.     

Mineralization of Poly(ɛ-caprolactone)/Adipate Modified Starch Blend in Agricultural Soil

The biodegradability properties of poly(ɛ-caprolactone) (PCL) and modified adipate-starch (AS) blends, using Edenol-3203 (E) as a starch plasticizer, were investigated in laboratory by burial tests of the samples in previously analyzed agricultural soil. The biodegradation process was carried out using the respirometric test according to ASTM D 5988-96, and the mineralization was followed by both variables such as carbon dioxide evolution and mass loss. The results indicated that the presence of AS-E accelerated the biodegradation rate as expected.     

Public Perception as a Barrier to Introducing Wood in Rivers for Restoration Purposes

Reintroduction of wood in rivers for restoration purposes is now recognized in a positive way by scientists. Nevertheless, the perception of wood in riverscapes is strongly affected by the socio-cultural environment. This cultural influence might explain why wood reintroduction is accepted and promoted in some regions of the world but not in others, despite the demonstrated ecological benefits. From an extensive student perception survey, we show that most of the groups from nine countries in the world considered riverscapes with wood to be less aesthetic, more dangerous, and needing more improvement than riverscapes without wood. By contrast, this way of thinking was not observed in Germany, Sweden, and Oregon (USA), where the first instances of wood reintroduction occurred.