Erratum

Naturwissenschaften Aktuell     

Petroleum waste biodegradation with porous biomass support system (PBSS) on rotating biological contactor

A laboratory scale study was conducted to assess the feasibility of the new coupling of rotating biological contactor (RBC) plus porous biomass support system (PBSS) using polyurethane foam as porous support media to biodegrade petroleum refinery wastewater. Polyurethane foam was attached on disks of two four-stage laboratory scale cascade connected RBC units.The two RBC units were operated simultaneously at different but constant, flowrates giving hydraulic loading rates of 0.01, 0.02, 0.03, 0.04 m3/m2/d in two runs keeping the same rotational speed 10 r/min throughout. Organic loading was a less controllable factor in this study.For all of the hydraulic loadings, it was found that the removal efficiency of total chemical oxygen demand (TCOD) and oil were above 80 percent. Ammonia nitrogen and phenol removal were above 90 and 80 percent respectively. The maximum biomass concentration within polyurethane foam was about 30 g/m2 in the first stage for 0.03 m3/m2/d hydraulic loading.The results show that t     

Status of air pollution in Beijing

A study has been made on elements organic constituents, TSP, SO2,NO2 of atmospheric pollutants in Beijing. 17 elements, and some PAHs, e. g. B(a)P, B(b, j, k)P, and B(g, h, i)P, in airborne particles by X-ray fluorescence spectroscopy and HPLC, GC/MS, have been determined respectively. It has been shown that the elements Pb, Zn, S and Cu were more enriched in fine particles and different valence states of sulfur at various sites. It was found that the concentrations of S6+ and S2-were more than 85% and less than 15% of the total sulfur respectively. Concentrations of major PAHs and sulfur-containing compounds increased in winter and in urban area. High values for Pb and Zn in city, Fe and Mn at industrial area and Cu, Al rural sites were obtained respectively. This implies the functions of different elemental sources of various sites. Thus, elements can be from distingushed anthropogenic and natural sources.The main contribution of SO2 was found of to have same seasonal variation as the anthropogenic el     

Spontaneous abortion after transcervical chorionic villus sampling: A case report

A case of spontaneous abortion after transcervical CVS is presented. Despite no evidence of bacteria in the vagina and cervix prior to sampling and the prophylactic use of Metronidazole, pathological evidence of chorioamnionitis was found. The implications of this are discussed.     

Prenatal diagnosis of cystic fibrosis using linked DNA probes

This paper presents data collected in Europe on 107 prenatal diagnoses of cystic fibrosis (CF) using linked DNA markers. To date, 38 children have been born without CF, as predicted, demonstrating the present rapid move from research to clinical genetic service.     

High-performance permanent magnets

 High-performance permanent magnets (pms) are based on compounds with outstanding intrinsic magnetic properties as well as on optimized microstructures and alloy compositions. The most powerful pm materials at present are RE–TM intermetallic alloys which derive their exceptional magnetic properties from the favourable combination of rare earth metals (RE=Nd, Pr, Sm) with transition metals (TM=Fe, Co), in particular magnets based on (Nd,Pr)₂Fe₁₄B and Sm₂(Co,Cu,Fe,Zr)₁₇. Their development during the last 20 years has involved a dramatic improvement in their performance by a factor of >15 compared with conventional ferrite pms therefore contributing positively to the ever-increasing demand for pms in many (including new) application fields, to the extent that RE–TM pms now account for nearly half of the worldwide market. This review article first gives a brief introduction to the basics of ferromagnetism to confer an insight into the variety of (permanent) magnets, their manufacture and application fields. We then examine the rather complex relationship between the microstructure and the magnetic properties for the two highest-performance and most promising pm materials mentioned. By using numerical micromagnetic simulations on the basis of the Finite Element technique the correlation can be quantitatively predicted, thus providing a powerful tool for the further development of optimized high-performance pms.     

CLIMATE CHANGE AND NATURAL HAZARDS IN NORTHERN CANADA: INTEGRATING INDIGENOUS PERSPECTIVES WITH GOVERNMENT POLICY

A study of the relationship between natural hazards and climate change in the international context provides the background for a discussion of the expected changes. In the context of this global discussion, this paper reviews the current perspectives of those natural hazards that are likely to be influenced by climate change, using northern Canada as a regional case study. The northern implications of the United Nations Framework Convention on Climate Change are examined, including the status of climate change action by the northern territorial governments, the evolving role of indigenous people, and the responsibility for climate change impacts. The difficulties surrounding natural hazards research in remote locations, and the approaches of indigenous people to natural hazards are then presented. The paper concludes with a suggested policy approach for climate change and natural hazards in northern Canada, underscoring the need for more comprehensive adaptive strategies to complement the current tendency to focus on the mitigation of greenhouse gases produced in this region.