Assessing village authenticity with satellite images: a method to identify intact cultural landscapes in Europe

The village with its characteristic zones of different land use from the center to the periphery is a basic unit of Europe's cultural landscapes. However, loss of the authentic pre-industrial village structure characterized by a fine-grained structure of arable land and wooded grasslands is a threat to both cultural heritage and biodiversity in many rural landscapes. Therefore, it is important that the extent and rate of change of such authentic villages in a landscape can be monitored. We studied to what extent loss of authenticity with increasing time after abandonment can be assessed by quantitative analysis and visual interpretation of satellite images. The study was carried out in the Bieszczady Mountains, SE Poland in 1999. Using Landsat Thematic Mapper data from 1998, both the grain size of landscape elements (size of fields) and land-cover composition (encroachment of shrub and forest) were quantitatively described 6 type villages representing different stages of deterioration of the authentic village structure. Historical maps were used to delineate the border of the villages and the former extension of forest and open land was measured. The present land use and the degree of abandonment expressed as grain size and forest encroachment were mapped using satellite data. Deterioration occurred along 2 transformation paths: abandonment and ultimately becoming forest, or intensified agriculture, respectively. To validate these results we classified 22 other villages in a 1000 km2 area by visual interpretation of the original satellite images into 1 of 4 types. We then collected historical data on human population changes over the past six decades. The classification of village authenticity was clearly related to the rate of human population decline. We address the importance of validating and applying this approach for rapid assessment of the authenticity of cultural landscapes in European regions being subject to ongoing as well as expected future change, related to expansion of the European Union. Finally, we argue that the village represents a scale at which integration of natural and social sciences is possible.     

Investigations of ash topography/morphology and their relationship with heavy metals leachability

The leachability of heavy metals such as chromium (Cr), lead (Pb) and cadmium (Cd) from the ash material obtained from waste combustion was studied. The effects of ash surface topography and morphology on the leachability of these elements were examined using atomic force microscopy (AFM) and scanning electron microscopy (SEM). The AFM (scan size 10 x 10 microns) and SEM images of the simulated ash pellet obtained at various operating temperatures (1000, 1400 and 1500 degrees C) showed significant microstructural and topographical changes. Ash pellets treated at 1000 degrees C contain porous and non-continuous surface. On the other hand, the ash pellet obtained at higher temperature (1500 degrees C) was found to contain a smooth, continuous and non-porous surface. The AFM height profile studies indicated that the top surface variation of the ash pellet at 1000, 1400 and 1500 degrees C were found to be -40.0 to 25.5, -3.7 to 4.7 and -0.10 to 0.66 nm respectively. The SEM analyses also confirmed the presence of smooth, non-porous outer surface of ash formed at 1500 degrees C. In addition, it also showed the presence of compact and rigid interior for the same ash pellet. The leachability of the heavy metals was determined using standard toxicity characteristic leaching procedure (TCLP) test and the samples were analysed using atomic absorption spectroscopy. The results showed that the TCLP leaching ratios of the heavy metals were Cr = 0.30, Pb = 0.05 and Cd = 0.09 at 1000 degrees C. However, the ash obtained at 1400 degrees C showed negligible heavy metals leaching ratio while at 1500 degrees C no leachability was detected (TCLP concentration dropped to nondetectable levels). The use of high temperature treatment enabled the immobilization of heavy metals in the ash preventing their leaching. Such ash can be considered as a non-hazardous material for reuse or safe disposal.     

Application of principal component analysis for the estimation of source of heavy metal contamination in surface sediments from the Rybnik Reservoir

The concentrations of metals, loss of ignition and nutrient (N, P) were determined in the bottom sediments of the Rybnik Reservoir (southern Poland). The mean concentrations of the metals in the bottom sediments were: Cd 25.8 microgram/g, Cu 451.7 microgram/g, Zn 1583.4 microgram/g, Ni 71.1 microgram/g, Pb 118.6 microgram/g, Cr 129.8 microgram/g, Fe 38782 microgram/g and Mn 2018.7 microgram/g. The bottom sediments are very heavily loaded with zinc, manganese, copper, nickel, phosphorus and lead (percentage enrichment factor), and cadmium, phosphorus and zinc (index of geoaccumulation). The increase of cadmium, lead, nickel and zinc concentrations was connected with the inflow of the contaminated water of the river Ruda and long-range transport. The contamination of the reservoir with copper and manganese resulted mainly from atmospheric precipitation. The variability of the bottom sediment loading with metals during the investigations was affected in the first place by changes in the concentration of iron, but also those elements whose concentrations in the bottom sediment were elevated compared to the concentrations in shale--cadmium, nickel and lead.     

Isolation and identification of intermediates from biodegradation of low chlorinated biphenyls (Delor-103)

Microorganism Pseudomonas species P2 metabolizes polychlorinated biphenyls (PCBs) and biphenyl, producing the whole spectrum of intermediates, among them coloured intermediates, which are suitable for the monitoring of PCBs degradation by optical sensors. Knowledge of chemical structures and conditions of development of colour metabolites is necessary for application of optical analytical methods. The main goal of this work was the isolation and identification of intermediates from the biodegradation of the mixture of low chlorinated biphenyls (Delor-103), which is based on the solid phase extraction (SPE) of the whole mixture using LiChrolut EN cartridges, then silylation of the extract as one way to the identification of one part of intermediates by GC-MS, and acetylation of the extract as a way for the further concentration and analysis of more polar chlorobiphenylols and chlorobiphenyldiols. The combination of SPE and following acetylation allows to obtain chlorobiphenylols and chlorobiphenyldiols as an almost pure fraction. The acetylation method could be also used instead SPE procedure with the same final concentration effect. Using the simulation mass spectrometry program, two new compounds, dihydrodihydroxytrichloro- and tetrahydrodihydroxytrichlorobiphenyl, as silylderivatives, were identified.     

Vegetation of the selected forest stands and land use in the Carpathian Mountains

Within the framework of the project "Effects of forest health on biodiversity with emphasis on air pollution in the Carpathian Mountains" 26 permanent study sites were established in the vicinity of the ozone monitoring sites. The study sites were located on the NW-SE transect through the Western (12 sites), Eastern (11 sites) and Southern (3 sites) Carpathians in forest ecosystems typical of each area. Some of the forest monitoring sites were located in national parks, biosphere reserves and areas of protected landscape. Each permanent site of 0.7 ha area consisted of 5 small 500m(2) circular plots, arranged in the form of a cross, i.e. four placed on the cardinal points (N, E, S, W) and one in the center. Phytosociological records were done twice during the 1998 growing season using the Braun-Blanquet's method. The study sites represented various types of forest: Picea abies stands (8), beech (Fagus sylvatica) stands (10), fir (Abies alba) stands (2) and mixed beech-fir, spruce-fir and beech-spruce stands (6). Age of most stands was 80-100 years. Degree of crown damage varied greatly between sites, a percentage of damaged trees decrease in Carpathians from West to East. It corresponds well with the O(3) level in these areas. Typical damage by O(3) in herb layer species in several Carpathian sites were found. Land-use map for the entire Carpathian Mountains and two detailed land use maps for Tatras (Western Carpathians) and Retezat (Southern Carpathians) are presented. A little more than half of the Carpathian territory is forested. The most densely forested are Eastern Carpathians, while the most sparsely Western Carpathians. Arable lands occupy 22.6% of the Carpathians, pastures and meadows 6.2%, water bodies 1.9%, and build up areas several percent. In the highest elevation of the Carpathians alpine meadows (11.3%) and rocks (3.5%) are distributed.     

Energy-dependent transport of cadmium by Stichococcus bacillaris

The investigations showed that Stichococcus bacillaris took up cadmium by means of adsorption and energy-dependent transport. Cadmium transport into alga cells was inhibited in the dark as well as under the influence of the uncouplers: 2,4-dinitrophenol (DNP), carbonyl cyanide m-chlorophenylhydrazone (CCCP), and ATPase inhibitor - N, N′ - dicyclohexylcarbodiimide (DCCD). It has also been stated that CCCP caused ATP level decrease in cells.     

RP-HPLC determination of phytoplankton pigments—comparison of calibration results for two columns

In the experiment reported the results obtained with two different columns for the RP-HPLC analysis of phytoplankton pigment components were compared. LiChroCART Hypersil ODS and LiChroCART LiChrospher 100 RP18e columns were used exchangeably. Two groups of high-purity pigment standards of reference phytoplankton strains (23 chlorophylls and carotenoids in the first case and 25 in the second case) were subjected to chromatographic analysis. All calibration parameters (retention times, calibration curves, spectrum shapes, detection thresholds) for qualitative and quantitative identification of pigments were determined. The results indicate that both columns used in the analysis ensure sufficient resolution and can be used interchangeably for the analysis of pigments present in naturally existing phytoplankton, even when present in only trace amounts.Communicated by O. Kinne, Oldendorf/Luhe     

<Emphasis Type="Italic">Fusarium</Emphasis> head blight incidence and mycotoxin accumulation in three durum wheat cultivars in relation to sowing date and density

Durum wheat (Triticum turgidum var. durum) is an important crop in Europe, particularly in the Mediterranean countries. Fusarium head blight (FHB) is considered as one of the most damaging diseases, resulting in yield and quality reduction as well as contamination of grain with mycotoxins. Three winter durum wheat cultivars originating from Austria, Slovakia, and Poland were analyzed during 2012–2014 seasons for FHB incidence and Fusarium mycotoxin accumulation in harvested grain. Moreover, the effects of sowing density and delayed sowing date were evaluated in the climatic conditions of Southern Poland. Low disease severity was observed in 2011/2012 in all durum wheat cultivars analyzed, and high FHB occurrence was recorded in 2012/2013 and 2013/2014 seasons. Fusarium graminearum was the most abundant pathogen, followed by Fusarium avenaceum. Through all three seasons, cultivar Komnata was the most susceptible to FHB and to mycotoxin accumulation, while cultivars Auradur and IS Pentadur showed less symptoms. High susceptibility of cv. Komnata was reflected by the number of Fusarium isolates and elevated mycotoxin (deoxynivalenol, zearalenone, and moniliformin) content in the grain of this cultivar across all three seasons. Nivalenol was identified in the samples of cv. Komnata only. Genotype-dependent differences in FHB susceptibility were observed for the plants sown at optimal date but not at delayed sowing date. It can be hypothesized that cultivars bred in Austria and Slovakia show less susceptibility towards FHB than the cultivar from Poland because of the environmental conditions allowing for more efficient selection of breeding materials.     

Influence of disability type on upper-limb motor skills

This study was carried out in order to determine the effect of physical disability (paraplegia) and sensory disability (deafness) on motor skills of the upper limbs. Studies were distinguished by two parameters: the nature of the control curve (sine or random) and the magnitude of the isometric force exerted on the lever (10?N, 20?N, 40?N, 80?N). A comparison of the quality of manual force control in a visual detection task among groups of people with sensory disability (deaf), people with physical disability (paraplegic) and people without disability showed differences among those groups. Values of force above 20?N create conditions of lower quality of control and of direction of force exertion outside the body. At the same time, the study proved that people with some types of disability can perform certain work tasks as effectively as people without disability.