Comparison of the substrate effect on voc emissions from water based varnish and latex paint

BACKGROUND, AIMS AND SCOPE: The building materials are recognised to be major contributors to indoor air contamination by volatile organic compounds (VOCs). The improvement of the quality of the environment within buildings is a topic of increasing research and public interest. Legislation in preparation by the European Commission may induce, in the near future, European Union Member States to solicit the industries of paints, varnishes and flooring materials for taking measures, in order to reduce the VOC emissions resulting from the use of their products. Therefore, product characterisation and information about the influence of environmental parameters on the VOC emissions are fundamental for providing the basic scientific information required to allow architects, engineers, builders, and building owners to provide a healthy environment for building occupants. On the other hand, the producers of coating building materials require this information to introduce technological alterations, when necessary, in order to improve the ecological quality of their products, and to make them more competitive. Studies of VOC emissions from wet materials, like paints and varnishes, have usually been conducted after applying the material on inert substrates, due to its non-adsorption and non-porosity properties. However, in real indoor environments, these materials are applied on substrates of a different nature. One aim of this work was to study, for the first time, the VOC emissions from a latex paint applied on concrete. The influence of the substrate (uncoated cork parquet, eucalyptus parquet without finishing and pine parquet with finishing) on the emissions of VOC from a water-based varnish was also studied. For comparison purposes, polyester film (an inert substrate) was used for both wet materials. METHODS: The specific emission rates of the major VOCs were monitored for the first 72 h of material exposure in the atmosphere of a standardized test chamber. The air samples were collected on Tenax TA and analysed using thermal desorption online with gas chromatography provided with both mass selective detection and flame ionisation detection. A double exponential model was applied to the VOC concentrations as a function of time to facilitate the interpretation of the results. RESULTS AND DISCUSSION: The varnish, which was introduced in the test chamber 23 h after the application of the last layer of material, emitted mainly glycolethers. Only primary VOCs were emitted, but their concentrations varied markedly with the nature of the substrate. The higher VOC concentrations were observed for the parquets of cork and eucalyptus, which indicated that they have a much higher porosity and, therefore, a higher power of VOC adsorption than the finished pine parquet (and polyester film). The paint was introduced in the chamber just after its application. Only primary VOCs were emitted (esters, phthalates, glycolethers and white spirit) but some compounds, like 2-(2-butoxyethoxy)ethanol and diethylphthalate, were only observed for paint/polyester, which suggested that they were irreversibly adsorbed by the paint/concrete. Compared with the inert substrate, the rate of VOC emissions was lower for concrete in the wet-stage (first hours after the paint application) but slightly higher later (dry-stage) as a consequence of desorption. CONCLUSIONS: As to varnish, the substrates without finishing, like cork and eucalyptus parquets, displayed a higher power of adsorption of VOCs than the pine parquet with finishing, probably because they have a higher porosity. As concerns paint, the total masses of VOCs emitted were lower for concrete than for polyester, indicating that concrete reduces the global VOC emissions from the latex paint. Concrete is seen to have a strong power of adsorption of VOCs. Some compounds, namely 2-(2-butoxyethoxy)ethanol, diethylphthalate and TEXANOL (this partially), were either irreversibly adsorbed by the concrete or desorbed very slowly (at undetected levels). A similar behaviour had not been reported for gypsum board, a paint substrate studied before. RECOMMENDATIONS AND OUTLOOK: The present data suggest that concrete may be a recommendable substrate for paint in an indoor environment. As the nature of the substrate conditions the rate and nature of VOC emissions from wet materials, it must be explicit when emissions from composite materials are reported, in order to allow comparisons and labelling of the product in terms of indoor air quality.     

Production and biomass accumulation of periphytic diatoms growing on glass slides during a 1-year cycle in a subtropical estuarine environment (Bay of Paranaguá, southern Brazil)

Production rates, chlorophyll concentrations and general composition of periphytic diatom communities growing on glass slides were studied in relation to environmental parameters during one seasonal cycle in the Bay of Paranaguá, southern Brazil. Slides were routinely submersed at 1, 2 and 3 m depth and recovered weekly for microscopic examinations, analyses of chlorophyll, cell counts and in situ photosynthetic incubations using the Winkler titration method. Water samples were also collected at surface and bottom layers for determinations of temperature, salinity, nutrients and chlorophyll in the water. The periphytic community was mainly formed by epipelic and epipsammic species, dominated by Navicula phyllepta, Cylindrotheca closterium, Navicula spp. and Amphora sp. Weekly chlorophyll a and cell accumulations on slides varied from <1–32 mg m⁻² and up to 31 × 10⁸cells m⁻², respectively. Photosynthetic rates varied from <1 to 35 mg oxygen mg chlorophyll a ⁻¹ h⁻¹, with higher values in summer. Daily production varied from 5 to 3,600 mg oxygen m⁻² day⁻¹ (<0.01–1.4 g carbon m⁻² day⁻¹). Multiple regression analysis revealed that vertical differences in light conditions and grazing pressure jointly affected the influence of temperature on the seasonal patterns of cell densities and chlorophyll concentrations according to depth. Received: 27 April 2000 / Accepted: 16 August 2000     

Landslides into reservoirs and their impacts on banks

Mass wasting processes, like slope failures, on the margins of dam reservoirs, lakes, bays and oceans may generate large water waves that can produce disasters due to flooding over the banks, run up along the shoreline and overtopping dam crests. Therefore, the study of slope failures, the subsequent generation of impulse waves and their consequences are of paramount importance for safety. In this paper the generation and propagation of water waves in reservoirs induced by landslides and their impact on banks were investigated by means of a laboratory study carried out at University of Coimbra wave channel, in a flume measuring 12.0 m  ×  1.5 m  ×  1.0 m (L  ×  H  ×  W), where two banks with variable slope were placed. The study considered the sliding of calcareous blocks over a sliding slope bank into the reservoir, the generation of impulse waves, their propagation in the reservoir and their impact on the downstream bank. A number of waves were generated by different fallings of calcareous blocks, considering different volumes, sliding slopes, initial positions and reservoir depths. All fallings were recorded by video-camera and the results were processed afterwards to obtain the time history of the falling. The water surface variations due to transient waves were measured at five gauges placed between the banks. The waves overtopping and breaking on the downstream bank were also filmed using a video camera, and the hydrodynamic forces on this bank were also measured using four pressure transducers.     

Geochemical Distribution and Bioavailability of Heavy Metals and Oxalate in Street Sediments from Rio de Janeiro, Brazil: A Preliminary Investigation

As urbanisation accelerates within less-economically developed countries, populations in cities such as Rio de Janeiro are subject to numerous health risks relating to “heavy metal”, sewage and vehicle pollution. These risks apply especially to children, through inhalation and dermal contact with pollutant-rich street sediments that reflect contamination from atmospheric deposition and act as effective sinks for heavy metals and oxalates. To assess the nature and extent of these risks street sediments were collected from industrial, commercial, residential and recreational areas with varying traffic densities within Rio de Janeiro. A modified selective extraction procedure was used to study the geochemical partitioning and bioavailability of Fe, Mn, Zn, Cu, Cr, Ni, Pb and C₂O ₄ ⁻ . Oxalate partitioning has not been studied by traditional sequential methods and results from this procedure highlight the potential bioavailability of both oxalates and “heavy metals”, especially Pb and C₂O ₄ ⁻ in industrial and recreational areas.     

Biochemical methane potential of food and garden waste co-digestion with variation in solid content and inoculum:substrate ratio

Journal of Material Cycles and Waste Management - The objective of this study is to evaluate the influence of the addition of garden waste (GW) on the performance of food waste (FW) anaerobic...     

Evaluation of tests to assess the quality of mine-contaminated soils

An acid metal-contaminated soil from the Aljustrel mining area (a pyrite mine located in SW Portugal in the Iberian Pyrite Belt) was subjected to chemical characterisation and total metal quantification (Cd, Cr, Cu, Ni, Pb and Zn). Water-soluble metals were determined and a sequential extraction procedure was used to investigate metal speciation. Two bioavailable metal fractions were determined: a mobile fraction and a mobilisable fraction. Soil ecotoxicity was studied using a battery of bioassays: plant growth test and seed germination with cress (Lepidium sativum L.), earthworm (Eisenia fetida) mortality, E. fetida avoidance behaviour, luminescent inhibition of Vibrio fischeri and Daphnia magna immobilisation. Although the total content of Cu, Zn and Pb in the soil was large (362, 245 and 1,250 mg/kg dry matter, respectively), these metals were mostly structurally bound (87% for Cu, 81% for Zn and 89% for Pb) and, therefore, scarcely bioavailable. Nonetheless, the D. magna immobilization test using soil leachate showed an EC₅₀ (48 h) of 36.3% (v/v), and the luminescent inhibition of V. fischeri presented an EC₂₀ (15 min) of 45.2% and an EC₂₀ (30 min) of 10.7% (v/v), suggesting a considerable toxic effect. In the direct exposure bioassays, E. fetida avoided the mine soil at the highest concentrations (50%, 75% and 100% v/v). At the same soil concentrations, cress showed negligible growth. The results suggest the need to use a battery of toxicity tests, in conjunction with chemical methods, in order to assess the quality of mine-contaminated soils correctly.     

Characterization of soil fauna under the influence of mercury atmospheric deposition in Atlantic Forest, Rio de Janeiro, Brazil

The increasing levels of mercury (Hg) found in the atmosphere arising from anthropogenic sources, have been the object of great concern in the past two decades in industrialized countries. Brazil is the seventh country with the highest rate of mercury in the atmosphere. The major input of Hg to ecosystems is through atmospheric deposition (wet and dry), being transported in the atmosphere over large distances. The forest biomes are of strong importance in the atmosphere/soil cycling of elemental Hg through foliar uptake and subsequent transference to the soil through litter, playing an important role as sink of this element. Soil microarthropods are keys to understanding the soil ecosystem, and for such purpose were characterized by the soil fauna of two Units of Forest Conservation of the state of the Rio de Janeiro, inwhich one of the areas suffer quite interference from petrochemicals and industrial anthropogenic activities and other area almost exempts of these perturbations. The results showed that soil and litter of the Atlantic Forest in Brazil tend to stock high mercury concentrations, which could affect the abundance and richness of soil fauna, endangering its biodiversity and thereby the functioning of ecosystems.