Removing the boundary influence on negatively buoyant jets

A comprehensive laboratory study of negatively buoyant discharges is presented. Unlike previous studies, here the focus is on generating data sets where influences of the bottom boundary have been eliminated. There are significant discrepancies in the published dilution data for these flows and a contributing factor is the large variation in the bottom boundary condition. A Laser-induced Fluorescence system is employed to gather flow spread, peak concentration (minimum dilution) and trajectory data for a wide range of densimetric Froude numbers and initial discharge angles. Data from these experiments are compared with previously published data, along with predictions from integral models and a revised form of the previously published semi-analytical solutions. The new data sets are not distorted by mixing processes associated with the bottom boundary and therefore provide the basis for more meaningful assessments of the predictive capabilities of existing models, given that the influences of the bottom boundary on contaminant mixing are not incorporated into these models. In general the models assessed are able to predict key geometric quantities with reasonable accuracy, but their minimum dilution predictions are conservative. Importantly dilution at the return point shows a strong dependence on the initial discharge angle and this could have important implications for the design of discharge systems.     

Sequential element extraction of soils from abandoned farms: an investigation of the partitioning of anthropogenic element inputs from historic land use

Enhanced soil element concentrations may serve as indicators not only of modern pollution, but also of former historic and/or pre-historic human activity. However, there is little consensus over the most appropriate means of extraction for identifying chemical signatures of modern and archaeological pollution. This study addressed this question by using a 5-step sequential extraction to examine the partitioning of elements within the soil. Samples were taken from known functional areas (hearth, house, byre, arable, and grazing areas) on a 19th century abandoned croft (small farm). A hot nitric acid digest and five-stage sequential extraction method were used to examine the partitioning of elements in soil and identify the current elemental distribution of anthropogenic contamination. The results indicate that although a significant proportion of Ca tends to be bound with exchangeable and weak acid soluble fractions, in the hearth and house areas there is also a significant proportion held within the recalcitrant residue. Pb concentrations tend to be associated with organic matter, ammonium oxalate extractable fractions and the residue, whilst Zn generally has a more even partitioning between the six soil fractions. The implications of this for extraction methodology are element and soil specific. However, the presence of a significant proportion of anthropogenically significant elements (including Ca, Pb, Zn, Sr, and Ba) within the resistant residue suggests the use of only a weak acid or an exchangeable fraction extraction would result in the loss of information from contamination resulting from former human activity. Hence, a total or pseudo-total extraction method is recommended for this type of study.     

Physical and numerical modelling of tsunami generation by a moving obstacle at the bottom boundary

This paper presents a study of the waves generated by a solid block landslide moving along a horizontal boundary. The landslide was controlled using a mechanical system in a series of physical experiments, and laser-induced fluorescence measurements resolved both spatial and temporal variations in the free surface elevation. During its constant-velocity motion, the landslide transferred energy into ‘trapped’ offshore-propagating waves within a narrow frequency band. The wave trapping is demonstrated by investigating the wave dispersion characteristics using a two-dimensional Fourier Transform. The first of the trailing waves broke at Froude numbers greater than or equal to 0.625. The parametric dependence of the largest-amplitude waves and the potential energy within the wave field are discussed. The experimental results were compared to the predictions of an incompressible Navier–Stokes solver with and without turbulence models. The numerical model under-predicted the measured wave amplitudes, although it accurately predicted the measured wave phasing. The turbulent model more accurately predicted the shapes of the trailing waves. Both experimental and numerical results confirmed that investigations into wave generation by submerged objects moving at constant velocity should also consider the initial acceleration of the object, as this affects the overall evolution of the wave field. The applicability of the horizontal-boundary results to more realistic field scenarios is discussed.     

Extractability and mobility of mercury from agricultural soils surrounding industrial and mining contaminated areas

This study focussed on a comparison of the extractability of mercury in soils with two different contamination sources (a chlor-alkali plant and mining activities) and on the evaluation of the influence of specific soil properties on the behaviour of the contaminant. The method applied here did not target the identification of individual species, but instead provided information concerning the mobility of mercury species in soil. Mercury fractions were classified as mobile, semi-mobile and non-mobile. The fractionation study revealed that in all samples mercury was mainly present in the semi-mobile phase (between 63% and 97%). The highest mercury mobility (2.7 mg kg(-1)) was found in soils from the industrial area. Mining soils exhibited higher percentage of non-mobile mercury, up to 35%, due to their elevated sulfur content. Results of factor analysis indicate that the presence of mercury in the mobile phase could be related to manganese and aluminium soil contents. A positive relation between mercury in the semi-mobile fraction and the aluminium content was also observed. By contrary, organic matter and sulfur contents contributed to mercury retention in the soil matrix reducing the mobility of the metal. Despite known limitations of sequential extraction procedures, the methodology applied in this study for the fractionation of mercury in contaminated soil samples provided relevant information on mercury's relative mobility.     

Alternate approaches for assessing impacts of oil sands development on air quality: A case study using the First Nation Community of Fort McKay

Previous analyses of continuously measured compounds in Fort McKay, an indigenous community in the Athabasca Oil Sands, have detected increasing concentrations of nitrogen dioxide (NO₂) and total hydrocarbons (THC), but not of sulfur dioxide (SO₂), ozone (O₃), total reduced sulfur compounds (TRS), or particulate matter (aerodynamic diameter <2.5 μm; PM_2.5). Yet the community frequently experiences odors, dust, and reduced air quality. The authors used Fort McKay’s continuously monitored air quality data (1998–2014) as a case study to assess techniques for air quality analysis that make no assumptions regarding type of change. Linear trend analysis detected increasing concentrations of higher percentiles of NO₂, nitric oxide (NO), and nitrogen oxides (NO_x), and THC. However, comparisons of all compounds between an early industrial expansion period (1998–2001) and current day (2011–2014) show that concentrations of NO₂, SO₂, THC, TRS, and PM_2.5 have significantly increased, whereas concentrations of O₃ are significantly lower. An assessment of the frequency and duration of periods when concentrations of each compound were above a variety of thresholds indicated that the frequency of air quality events is increasing for NO₂ and THC. Assessment of change over time with odds ratios of the 25th, 50th, 75th, and 90th percentile concentrations for each compound compared with an estimate of natural background variability showed that concentrations of TRS, SO₂, and THC are dynamic, higher than background, and changes are nonlinear and nonmonotonic. An assessment of concentrations as a function of wind direction showed a clear and generally increasing influence of industry on air quality. This work shows that evaluating air quality without assumptions of linearity reveals dynamic changes in air quality in Fort McKay, and that it is increasingly being affected by oil sands operations.

Implications: Understanding the nature and types of air quality changes occurring in a community or region is essential for the development of appropriate air quality management policies. Time-series trending of air quality data is a common tool for assessing air quality changes and is often used to assess the effectiveness of current emission management programs. The use of this tool, in the context of oil sands development, has significant limitations, and alternate air quality change analysis approaches need to be applied to ensure that the impact of this development on air quality is fully understood so that appropriate emission management actions can be taken.     

The role of Earth Observation (EO) technologies in supporting implementation of the Ramsar Convention on Wetlands

Over one hundred wetland specialists and Earth Observation experts from around the world gathered at the European Space Agency's 'GlobWetland Symposium: Looking at wetlands from space' in Frascati, Italy, from 19 to 20 October, 2006. The aim of the Symposium was to stimulate discussion between the two communities by reviewing the latest developments in Earth Observation (EO) for the inventory, assessment and monitoring of wetlands and identify key scientific, technical and policy-relevant challenges for the future. The results provide an overview of the key areas of current research in the use of EO for mapping and managing wetlands, while also pointing out gaps that could hinder global inventory, assessment and monitoring of wetlands. This paper provides a summary of the main outputs with a focus on the role of EO technologies in supporting the implementation of the Ramsar Convention on Wetlands. The summary contains a qualitative analysis of the state of the art and considers possible directions and priorities for future research, development and application of EO-based technologies in wetland management. In this context we: 1) highlight those applications where EO technologies are ready for wider uptake by wetland managers, and provide suggestions for supporting such uptake; 2) indicate where EO technologies and applications currently in the research and development stages could potentially be useful in wetland management; and 3) provide recommendations for new research and development of EO technologies, that can be utilized to address aspects of wetland management not covered by the range of current EO applications.     

Sustainable engineering education in the United States

Sustainable engineering is a conceptual and practical challenge to all engineering disciplines. Although the profession has experience with environmental dimensions of engineering activities that in some cases are quite deep, extending the existing body of practice to sustainable engineering by including social and cultural domains is a significant and non-trivial challenge. Nonetheless, progress is being made, as a recent study undertaken by the Center for Sustainable Engineering in the United States demonstrates.

Estimating the extractability of potentially toxic metals in urban soils: a comparison of several extracting solutions

Metals released by the extraction with aqua regia, EDTA, dilute HCl and sequential extraction (SE) by the BCR protocol were studied in urban soils of Sevilla, Torino, and Glasgow. By multivariate analysis, the amounts of Cu, Pb and Zn liberated by any method were statistically associated with one another, whereas other metals were not. The mean amounts of all metals extracted by HCl and by SE were well correlated, but SE was clearly underestimated by HCl. Individual data for Cu, Pb and Zn by both methods were correlated only if each city was considered separately. Other metals gave poorer relationships. Similar conclusions were reached comparing EDTA and HCl, with much lower values for EDTA. Dilute HCl extraction cannot thus be recommended for general use as alternative to BCR SE in urban soils.