Are barnacle larvae able to escape from the threat of UV?

Earlier laboratory experiments suggested that environmental levels of UV-B radiation can damage the eyes of barnacle naupliar larvae and impair their phototactic behaviors. However, since barnacle larvae may avoid UV by migrating to deeper waters, it is not known whether such impairment would actually occur under field conditions. For the first time, this study provides both field and laboratory evidences to show that prevailing UV-B in the natural habitat of barnacle larvae could be an important environmental factor affecting natural barnacle populations. We here showed that although barnacle nauplii may avoid UV-B irradiation by downward migration, the amount of UV energy (9.8 × 10⁻⁶ J) received by a naupliar eye during downward migration in the natural water column is within the same order of magnitude as the total energy (7.5 × 10⁻⁶ J) sufficient to cause damages to naupliar eye and impair their phototactic responses. It is possible that solar UV-B prevailing at shallow waters would pose a similar threat to other zooplankton species over large geographic scale.     

Ozonation of activated carbon and its effects on the adsorption of VOCs exemplified by methylethylketone and benzene

Ozonation can modify the surface property of an activated carbon such as specific surface area, pore volume, and functional group. Results indicate that ozonation can increase the specific surface area of an activated carbon from 783+/-51 to 851+/-25 m2/g due in part to increasing micropores (those below 15 A). However, there is no change in macropore and mesopore upon ozonation. The amount of oxygen functional group (OFG) increases from 197+/-4 to 240+/-4 microeq/g, mostly in hydroxyl and carboxyl groups upon ozone treatment. These oxygen-containing functional groups are stable in the temperature range 30-250 degrees C, but begin to decompose when temperature increases beyond 300 and 350 degrees C. When the temperature reaches 1200 degrees C, all OFGs virtually disappear. The effect of ozone treatment on the adsorption of volatile organic carbon (VOC) was exemplified by methylethylketone (MEK) and benzene. The adsorption density of MEK and benzene by ozone treated activated carbon (AC(O3)) are greater than that by the untreated (AC), with MEK being more adsorbable than benzene. Results of factorial analysis indicate that physical characteristics, namely, micropore, BET surface area, pore diameter (PD), micropore volume (MV) play an important role on benzene and MEK adsorption.     

Dissolution of trace element contaminants from two coastal plain soils as affected by pH

Trace element mobility in soils depends on contaminant concentration, chemical speciation, water movement, and soil matrix properties such as mineralogy, pH, and redox potential. Our objective was to characterize trace element dissolution in response to acidification of soil samples from two abandoned incinerators in the North Carolina Coastal Plain. Trace element concentrations in 11 soil samples from both sites ranged from 2 to 46 mg Cu kg(-1), 3 to 105 mg Pb kg(-1), 1 to 102 mg Zn kg(-1), 3 to 11 mg Cr kg(-1), < 0.1 to 10 mg As kg(-1), and < 0.01 to 0.9 mg Cd kg(-1). Acidified CaCl2 solutions were passed through soil columns to bring the effluent solution to approximately pH 4 during a 280-h flow period. Maximum concentrations of dissolved Cu, Pb, and Zn at the lowest pH of an experiment (pH 3.8-4.1) were 0.32 mg Cu L(-1), 0.11 mg Pb L(-1), and 1.3 mg Zn L(-1) for samples from the site with well-drained soils, and 0.25 mg Cu L(-1), 1.2 mg Pb L(-1), and 1.4 mg Zn L(-1) for samples from the site with more poorly drained soils. Dissolved Cu concentration at pH 4 increased linearly with increasing soil Cu concentration, but no such relationship was found for Zn. Dissolved concentrations of other trace elements were below our analytical detection limits. Synchrotron X-ray absorption near edge structure (XANES) spectroscopy showed that Cr and As were in their less mobile Cr(III) and As(V) oxidation states. XANES analysis of Cu and Zn on selected samples indicated an association of Cu(II) with soil organic matter and Zn(II) with Al- and Fe-oxides or franklinite.     

Use of noise attenuation modeling in managing missile motor detonation activities

The Sound Intensity Prediction System (SIPS) and Blast Operation Overpressure Model (BOOM) are semiempirical sound models that are employed by the Utah Test and Training Range (UTTR) to predict whether noise levels from the detonation of large missile motors will exceed regulatory thresholds. Field validation of SIPS confirmed that the model was effective in limiting the number of detonations of large missile motors that could potentially result in a regulatory noise exceedance. Although the SIPS accurately predicted the impact of weather on detonation noise propagation, regulators have required that the more conservative BOOM model be employed in conjunction with SIPS in evaluating peak noise levels in populated areas. By simultaneously considering the output of both models, in 2001, UTTR detonated 104 missile motors having net explosive weights (NEW) that ranged between 14,960 and 38,938 lb without a recorded public noise complaint. Based on the encouraging results, the U.S. Department of Defense is considering expanding the application of these noise models to support the detonation of missile motors having a NEW of 81,000 lb. Recent modeling results suggest that, under appropriate weather conditions, missile motors containing up to 96,000 lb NEW can be detonated at the UTTR without exceeding the regulatory noise limit of 134 decibels (dB).     

Comparative Evaluation of Three River Water Quality Models1

Abstract: Selection of a biochemical oxygen demand (BOD) reaction model to incorporate into dissolved oxygen (DO) water quality models is an overlooked choice available to river water quality modelers. Data from rivers can serve in screening methods to discriminate between competing water quality models. In this study, 15 published BOD and DO datasets based on a 7 year long study of the Bormida River in Italy are used to calibrate three‐multiorder BOD models: first‐order, three‐halves order, and second‐order, which are then included in three corresponding DO models which incorporate these BOD models. The adequacy of the first‐order, three‐halves order and second‐order BOD models was evaluated by calculating the root mean square error between a model and data. A similar procedure was followed to evaluate three DO models, each of which incorporated one of the three BOD models. The first‐order BOD model most frequently fit the river data best, followed by the three‐halves order and the second‐order BOD models. The DO model incorporating a first‐order BOD model most frequently fit the data best, followed by the DO order incorporating second‐order BOD and the DO model incorporating three‐halves order BOD.     

Computer simulations help determine safe vertical boom speeds for roof bolting in underground coal mines

PROBLEM: Incident investigation reports do not usually contain enough information to aid in studying boom arm vertical speed for roof bolting machines to determine the impact that appendage speed had on an operator's risk of experiencing a contact. Laboratory experiments with human subjects are also not feasible because of safety and ethical issues. METHOD: Researchers successfully developed a three-dimensional computer model that uses virtual human simulation software as the primary means to gather contact data when the boom arm touches the operator's hand, arm, head, or leg. RESULTS: Data analysis of roof bolter simulations shows that the speed of the boom arm is the most important factor in determining the risk of an operator making contact. Regardless of other variables, contact incidents were always greater when the bolter arm was moving up, greater on the hand, and greater for the boom arm part of the machine. The reason why the subject experiences more contacts when the boom arm is moving up rather than down is that more risky behaviors occur during drilling and bolting when the boom arm is ascending. Based on the data collected, boom speeds greater than 13 in/sec result in a substantial increase in risk to the roof bolter operator of making contact. Speeds less than or equal to 13 in/sec are associated with a more modest relative risk of making contact, which represents a decrease in potential hazard. IMPACT ON INDUSTRY: The use of such information can be quite helpful in making recommendations to machine design and task procedures to reduce the likelihood that roof bolter operators will experience injury due to contact with a moving roof bolting machine's boom arm.     

Distribution of Diatoms in a Forested Stream Containing a Series of Interconnected Lakes

We explored the spatial variation in diatom communities withinthe Turkey Lakes Watershed (TLW). The TLW is a single watershed in an old growth sugar maple forest that contains an alternatingseries of stream and lake embayments. Near the outlet of each lake, we sampled pools and riffles to determine abundance and diversity of diatom communities along this hydrologic system. Diatom diversity, measured by Shannon-Weaver Index, richness andevenness, increased steadily downstream before eventually decreasing near the watershed outlet. Canonical CorrespondenceAnalysis indicated that diatom genera were correlated with streamchemistry. Upper reaches were the least productive, characterizedby lower pH (<7), higher N:P (113:1 to 124:1, dominated by complex forms of N), and high mean relative abundances of Eunotia spp., Tabellaria spp., and Pinnularia spp. Middle and lower reaches were more productive, characterized byhigher pH (>7), lower N:P (71:1 to 90:1, dominated by simple forms of N, e.g., nitrate-N), and high mean relative abundances of Cymbella spp. and Brachysira spp. Achnanthesminutissima (Kutz.) Hustedt, the most abundant species, and Navicula spp., Nitzschia spp., Gomphonema spp., and Frustrulia spp. were represented at all stream sites. Thisstudy revealed that within the TLW, a hydrologic system of the same stream order, the diatom community was influenced by a nutrient gradient, where the stream and its intervening lakes contributed to a shift from acidic, inorganic N-poor upper reaches to a circum-neutral, inorganic N-richer outlet. By imparting genera-specific stresses, stream flow (i.e. pools vs. riffles) further shaped the diatom community.     

Leaching behavior and chemical stability of copper butyl xanthate complex under acidic conditions

Although xanthate addition can be used for treating copper-containing wastewater, a better understanding of the leaching toxicity and the stability characteristics of the copper xanthate complexes formed is essential. This work was undertaken to evaluate the leaching behavior of copper xanthate complex precipitates by means of toxicity characteristics leaching procedure (TCLP) and semi-dynamic leaching test (SDLT) using 1 N acetic acid solution as the leachant. Also, the chemical stability of the copper xanthate complex during extraction has been examined with the studying of variation of chemical structure using UV-vis, Fourier transform infrared and X-ray photoelectron spectroscopies (XPS).Both TCLP and SDLT results showed that a negligible amount of copper ion was leached out from the copper xanthate complex precipitate, indicating that the complex exhibited a high degree of copper leaching stability under acidic conditions. Nevertheless, chemical structure of the copper xanthate complex precipitate varied during the leaching tests. XPS data suggested that the copper xanthate complex initially contained both cupric and cuprous xanthate, but the unstable cupric xanthate change to the cuprous form after acid extraction, indicating the cuprous xanthate to be the final stabilizing structure. Despite that, the changes of chemical structure did not induce the rapid leaching of copper from the copper xanthate complex.