Tissue distribution and elimination of trichlorobenzenes in the rat

The tissue distribution and excretion of three trichlorobenzene isomers (TCB) were investigated in the rat. Single doses of TCBs were administered orally to groups of 5 fasted rats at 10 mg/kg body weight. Serial sacrifices were carried out and the radioactivity contents were determined in tissues and blood. For all three TCB isomers, radioactivity appeared in the blood and tissues at 0.5 h, and peaked around 2-4 h after dosing. Fat, skin, and liver had high concentrations of the parent compound while kidney and muscle had high levels of metabolites. Elimination of TCB from tissues and blood can best be described by a two-compartmental open pharmacokinetic model. The terminal half-lives were 145, 93 and 68 h for 1,2,3-, 1,2,4 and 1,3,5-TCB isomer respectively. Ninety-five percent of the administered 1,2,3- and 89% of the 1,3,5-isomers were eliminated within 48 h in the urine and feces with the former being the major route.     

长链烯酮不饱和度温标研究进展

长链烯酮不饱和度温标是古温度研究的重要替代指标。介绍了小样量、低长链烯酮样品的分析方法 ,长链烯酮的来源、分布 ,长链烯酮的不饱和度与温度的关系及其在古环境研究中的应用。介绍海洋中长链烯酮研究最新进展的同时 ,着重阐述了湖泊中长链烯酮研究现状及存在的主要问题。     

Maternal cell contamination in cultured chorionic villi: Comparison of chromosome Q-polymorphisms derived from villi,fetal skin,and maternal lymphocytes

Maternal cell contamination of chorionic villi (CV) samples used for first trimester prenatal diagnosis can cause obvious and/or unrecognized diagnostic dilemmas. The purpose of this investigation is to assess the frequency of maternal cell contamination (MCC) in chorionic villus samples and to evaluate selected parameters which might predict where contamination is more likely to have occurred. Maternal lymphocytes, chorionic villi from ultrasonically directed transcervical catheter aspiration, and fetal tissue were obtained at 8–11 weeks gestation from 45 patients undergoing elective termination. Quinacrine (Q) banded metaphases were compared from duplicate direct preparations of chorionic villi; cultured chorionic villi, fetal fibroblast tissue cultures, and maternal lymphocyte cultures. Q-polymorphisms in metaphase chromosomes were 100 per cent concordant between fetal tissue and direct CV preparation. However, evidence for maternal cell contamination occurred in 13.1 per cent of cultured chorionic villi preparations where polymorphisms were found to be identical between maternal and cultured CV and both distinct from fetal tissue preparations. Where MCC was identified, it was noted that CV cell cultivation interval was prolonged (24.2±6.8 days) compared with non-contaminated cultures (14.1±4.4 days) (p <0.05). We conclude that maternal cell contamination is a significant problem with chorionic villus sampling. Where direct preparations are not employed or when cultures are ‘slow growing’, MCC may be a significant and unrecognized complication re: fetal diagnosis. Direct preparations, multiple cultures, quinacrine banding, and maternal Q-polymorphism comparisons can minimize diagnostic dilemmas secondary to maternal cell contamination. Q-polymorphism comparisons between maternal and fetal chromosomes should be included in all instances where cultured chorionic villi are utilized for fetal diagnosis and where direct preparations are not available.     

离子色谱法替代铬酸钡光度法测定硫酸根可行性探讨

探讨了以清洁水质和标准样品为实验对象，分别采用离子色谱法和铬酸钡光度法进行对比实验，根据实验结果证明了用离子色谱法替代铬酸钡光度法测定硫酸根离子可行性。     

臭氧发生系统中半导体制冷干燥装置的研制

本文介绍了未经过干燥处理的原料气进入电晕放电臭氧发生系统后的危害机理 ,根据半导体的制冷干燥机理 ,开发研制了实验室用半导体制冷干燥装置 ,实验证明该装置的研制是成功的。     

The direct photolysis and photocatalytic degradation of alachlor at different TiO2 and UV sources

Direct photolysis and photocatalytic degradations of alachlor, a widely used herbicide, were studied using three different monochromatic UV lamps (254, 300 and 350 nm) and two TiO(2) sources. Both the direct photolysis and photocatalytic degradations of alachlor follow pseudo-first-order decay kinetics. TiO(2)-P25 was found to be an effective photocatalyst compared to TiO(2)-BDH. The direct photolysis of alachlor was dominant at 254 nm even if TiO(2) was present in the solution. Among the three UV wavelengths used, the highest photocatalysis quantum yield was obtained at 300 nm. The photocatalytic degradation rate of alachlor increased with the dosages of TiO(2), but an overdose of TiO(2) would retard the reaction due to light attenuation. Photocatalytic reactions were slightly enhanced in an alkaline medium, and the different proton sources causing various degrees of rate retardation were due to the presence of the corresponding counter anions. This effect was diminished at a later stage after the reaction intermediates were formed.     

A feasibility study on the predictive emission monitoring system applied to the Hsinta power plant of Taiwan Power Company

The continuous emission monitoring system (CEMS) can monitor flue gas emissions continuously and instantaneously. However, it has the disadvantages of enormous cost, easily producing errors in sampling periods of bad weather, lagging response in variable ambient environments, and missing data in daily zero and span tests and maintenance. The concept of a predictive emission monitoring system (PEMS) is to use the operating parameters of combustion equipment through thermodynamic or statistical methods to construct a mathematic model that can predict emissions by a computer program. The goal of this study is to set up a PEMS in a gas-fired combined cycle power generation unit at the Hsinta station of Taiwan Power Co. The emissions to be monitored include nitrogen oxides (NOx) and oxygen (O2) in flue gas. The major variables of the predictive model were determined based on the combustion theory. The data of these variables then were analyzed to establish a regression model. From the regression results, the influences of these variables are discussed and the predicted values are compared with the CEMS data for accuracy. In addition, according to the cost information, the capital and operation and maintenance costs for a PEMS can be much lower than those for a CEMS.     

Bioaccumulation and critical body residue of PAHs in the amphipod,Diporeia spp: additional evidence to support toxicity additivity for PAH mixtures

Polycyclic aromatic hydrocarbons (PAHs) are considered to act additively when exposed as congener mixtures. Additive internal concentrations at the site of toxic action is the basis for recent efforts to establish a sum PAH guideline for sediment-associated PAH toxicity. This study determined the toxicity of several PAH congeners on a body residue basis in Diporeia spp. These values were compared to the previously established LR(50) value for a PAH mixture based on the molar sum of PAH congeners and demonstrated similar LR(50) values for individual PAH. These results support the contention that the PAH act at the same molar concentration whether present as individual compounds or in mixture. Aqueous exposures were conducted for 28 d, and the water was exchanged daily to maintain the exposure concentration. The concentration in the exposures declined by an average of 22% between water exchanges across all compounds, and ranged from 11% to 32%. The toxicokinetics were determined using both time-weighted-average (TWA) and time-variable water concentrations and were not statistically different between the two source functions. Toxicity was determined for both mortality and immobility (failure to swim on prodding) and on both a TWA water concentration and a body residue basis. The LC(50) values ranged from 1757 microg l(-1) for naphthalene after 10 d exposure to 79.1 microg l(-1) for pyrene after 28 d exposure, and the EC(50) ranged from 1587 microg l(-1) for naphthalene after 10 d exposure to 38.2 microg l(-1) for pyrene after 28 d exposure. The LR(50) values for all congeners at all lengths of exposure were essentially constant and averaged 7.5+/-2.6 micromol g(-1), while the ER(50) for immobility averaged 2.6+/-0.6 micromol g(-1). The bioconcentration factor declined with increasing exposure concentration and was driven primarily by a lower uptake rate with increasing dose, while the elimination remained essentially constant for each compound.     

Fine (PM2.5), coarse (PM2.5-10), and metallic elements of suspended particulates for incense burning at Tzu Yun Yen temple in central Taiwan

Ambient suspended particulate concentrations were measured at Tzu Yun Yen temple (120 degrees, 34('), 10(") E; 24 degrees, 16('), 12(") N) in this study. This is representative of incense burning and semi-open sampling sites. The Universal-sampler collected fine and coarse particle material was used to measure suspended particulate concentrations, and sampling periods were from 16/08/2001 to 2/1/2002 at Tzu Yun Yen temple. In addition, metallic element concentrations, compositions of PM(2.5) and PM(2.5-10) for incense burning at Tzu Yun Yen temple were also analyzed in this study. The PM(2.5)/PM(10) ratios ranged between 31% and 87% and averaged 70+/-11% during incense the burning period, respectively. The median metallic element concentration order for these elements is Fe>Zn>Cr>Cd>Pb>Mn>Ni>Cu in fine particles (PM(2.5)) at the Tzu Yun Yen temple sampling site. The median metallic element concentration order for these elements is Fe>Zn>Cr>Pb>Cd>Ni>Mn>Cu in coarse particle (PM(2.5-10)) at the Tzu Yun Yen temple sampling site. Fine particulates (PM(2.5)) are the main portion of PM(10) at Tzu Yun Yen temple in this study. From the point of view of PM(10), these data reflect that the elements Fe, Zn, and Cr were the major elements distributed at Tzu Yun Yen temple in this study.     

The study of lag phase and rate improvement of TCE decay in UV/surfactant systems

The photodegradation of trichloroethene (TCE) in surfactant micelles was investigated. The decay of TCE was studied in the Rayonet RPR-200 merry-go-round photoreactor, at 253.7 nm monochromatic ultraviolet (UV) lamps, in the presence of surfactants. Surfactants are used as additional hydrogen sources to improve the photodegradation rates of TCE. About three times the rate increment is observed in the presence of Brij 35 surfactant micelles than in water alone. The increasing concentrations of H+ and Cl- indicate that they are the final products of TCE photodegradation (i.e. photodechlorination is the dominant mechanism in this system). A lag phase is observed at the beginning of the degradation, but the duration of the lag phase is apparently reduced as the initial pH increases. Because the overall decay of TCE is also found faster at higher pH levels, it is suggested that the free radical reaction is dominant at high pH levels, and the formation of lag phases is mainly due to the deficiency of free radicals at lower pH levels. The photodecomposition of TCE in surfactant micelles is also proven to be a clean and effective process. It generates no chlorinated by-products or intermediates during the process, and TCE is fully decomposed within a reasonable time.