Characterization of Sonic Devices Used for Cleaning Fabric Filters

ABSTRACT

Ozone reactivity scales play an important role in selecting which chemical compounds are used in products ranging from gasoline to pesticides to hairspray in California, across the United States and around the world. The California Statewide Air Pollution Research Center (SAPRC) box model that calculates ozone reactivity uses a representative urban atmosphere to predict how much additional ozone forms for each kilogram of compound emission. This representative urban atmosphere has remained constant since 1988, even though more than 25 years of emissions controls have greatly reduced ambient ozone concentrations across the United States during this time period. Here we explore the effects of updating the representative urban atmosphere used for ozone reactivity calculations from 1988 to 2010 conditions by updating the meteorology, emission rates, concentration of initial conditions, concentration of background species, and composition of volatile organic compound (VOC) profiles. Box model scenarios are explored for 39 cities across the United States to calculate the Maximum Incremental Reactivity (MIR) scale for 1,233 individual compounds and compound-mixtures. Median MIR values across the cities decreased by approximately 20.3% when model conditions were updated. The decrease is primarily due to changes in atmospheric composition ultimately attributable to emissions control programs between 1998 and 2010. Further effects were caused by changes in meteorological variables stemming from shifting seasons for peak ozone events (summer versus early fall). Lumped model species with the highest MIR values in 1988 experienced the greatest decrease in MIR values when conditions were updated to 2010. Despite the reduction in the absolute reactivity in the updated 2010 atmosphere, the relative ranking of the VOCs according to their reactivity did not change strongly compared to the original 1988 atmosphere. These findings indicate that past decisions about ozone control programs remain valid today, and the ozone reactivity scale continues to provide relevant guidance for future policy decisions even as new products are developed.

Implications: Updating the representative urban atmosphere used for the Maximum Incremental Reactivity (MIR) scale from 1988 to 2010 conditions caused the reactivity of 1223 individual compounds and combined mixtures to decrease by an average of 20.3% but the relative ranking of the VOCs was not strongly affected. This means that previous guidance about preferred chemical formulations to reduce ozone formation in cities across the United States remain valid today, and the MIR scale continues to provide relevant guidance for future policy decisions even as new products are developed.     

Carbonyl Emissions from Commercial Cooking Sources in Hong Kong

Abstract

Cooking fumes are an important carbonyl emission source, especially in a highly urbanized city, such as Hong Kong. Cooking exhaust from 15 commercial kitchens of a variety of cooking styles was sampled and analyzed for a suite of 13 carbonyl compounds. Carbonyl compositions were varied among the different cooking styles. Formal dehyde was generally the most abundant carbonyl, and its contribution to the total carbonyl amount on a molar basis ranged from 12 to 60%. Acrolein was also found to be an abundant carbonyl in the cooking exhaust. The highest contribution by acrolein to the total carbonyls was found to be 30% in the exhaust of a western-style steak restaurant. Long-chain saturated carbonyls, that is, heptanal, octanal, and nonanal, accounted for a signifi-cant fraction (>40%) of the total carbonyls in kitchens that always used heated cooking oils. Two dicarbonyls, glyoxal and methylglyoxal, had a various presence in the cooking emissions, ranging from negligible to 10%. The presence of benzaldehyde and tolualdehyde was mostly negligible in the sampled kitchen exhaust. Annual emission rates of both individual carbonyls and total carbon-yls were estimated for various types of commercial kitchens. Local-style fast-food shops contributed the highest total carbonyl emissions per year mainly because of the large number of this kind of restaurant in Hong Kong. The citywide annual emission rates of the three most toxic carbonyls, formaldehyde, acetaldehyde, and acrolein, were estimated assuming that the limited number of sampled restaurants were representative of the average restaurants. Such estimates of carbonyl emission rates were comparable to the estimated carbonyl emissions from vehicular sources, suggesting the importance of commercial cooking as a source for carbonyls in Hong Kong.     

Application of a Combined Measurement and Modeling Method to Quantify Windblown Dust Emissions from the Exposed Playa at Mono Lake,California

ABSTRACT

Particulate matter ≤10 μm (PM₁₀) emissions due to wind erosion can vary dramatically with changing surface conditions. Crust formation, mechanical disturbance, soil texture, moisture, and chemical content of the soil can affect the amount of dust emitted during a wind event. A refined method of quantifying windblown dust emissions was applied at Mono Lake, CA, to account for changing surface conditions. This method used a combination of real-time sand flux monitoring, ambient PM₁₀ monitoring, and dispersion modeling to estimate dust emissions and their downwind impact. The method identified periods with high emissions and periods when the surface was stable (no sand flux), even though winds may have been high. A network of 25 Cox sand catchers (CSCs) was used to measure the mass of saltating particles to estimate sand flux rates across a 2-km² area. Two electronic sensors (Sensits) were used to time-resolve the CSC sand mass to estimate hourly sand flux rates, and a perimeter tapered element oscillating microbalance (TEOM) monitor measured hourly PM₁₀ concentrations. Hourly sand flux rates were related by dispersion modeling to hourly PM₁₀ concentrations to back-calculate the ratio of vertical PM₁₀ flux to horizontal sand flux (K-factors). Geometric mean K-factor values (K _f) were found to change seasonally, ranging from 1.3 × 10^?5 to 5.1 × 10^?5 for sand flux measured at 15 cm above the surface (q ₁₅). Hourly PM₁₀ emissions, F, were calculated by applying seasonal K-factors to sand flux measurements (F?=?K _f ×?q ₁₅). The maximum hourly PM10 emission rate from the study area was 76 g/m²·hr (10-m wind speed?=?23.5 m/sec). Maximum daily PM₁₀ emissions were estimated at 450 g/m²·day, and annual emissions at 1095 g/m²·yr. Hourly PM₁₀ emissions were used by the U.S. Environmental Protection Agency (EPA) guideline AERMOD dispersion model to estimate downwind ambient impacts. Model predictions compared well with monitor concentrations, with hourly PM₁₀ ranging from 16 to over 60,000 μg/m³ (slope?=?0.89, R ²?=?0.77).

IMPLICATIONS Under a U.S. Environmental Protection Agency (EPA)-approved plan, the method described in this paper has been used since 2000 at Owens Lake, CA, to identify and successfully mitigate dust from over 100 km² of the dry lakebed. It continues to be used to monitor dust control compliance at Owens Lake. Scaled-down versions of the Owens Lake network can be implemented in other areas in a manner similar to the Mono Lake study. Once K-factors are established, low-cost CSC samplers (about $35 U.S.) may be used for periodic monitoring (e.g., daily, weekly, or monthly) to estimate PM₁₀ emissions or to evaluate dust control compliance.     

不同改性方式对控释碳源材料脱氮性能的影响

以玉米淀粉(S)为碳源,聚乙烯醇(P)为骨架载体,根据是否用硼酸(B)和硫酸钠(N)做改性处理,制备了GSP、GSP-N、GSP-B和GSP-BN 4种控释碳源材料,研究N、B和BN 3种改性方式对碳源材料脱氮性能的影响。在添加4种碳源的静态实验中,硝酸盐氮去除率均在96.1%以上。碳源材料的改性对硝酸盐氮的降解情况影响不明显,但对脱氮过程中TOC、亚硝酸盐氮、氨氮和TN浓度的变化有不同程度的影响。以TOC、亚硝酸盐氮、氨氮和TN为指标,N、BN和B 3种改性方式综合效益指数分别为5.62、4.6和1.92,硫酸钠(N)改性处理对提高控释碳源材料整体性能具有最佳效果。     

Optimization of two-step catalyzed biodiesel production from soybean waste cooking oil

An acid–base-catalyst-based two-step biodiesel production experiment from soybean waste cooking oil was carried out to identify which parameter is the most influential among the experimental parameters by using the Taguchi method. Heterogeneous catalysts were used to avoid a water-consuming homogeneous catalyst removal process. Ferric sulfate and calcium oxide were used as acid and base catalysts, respectively, for the heterogeneous reaction. Reaction time and methanol-to-triglyceride mole ratio were significant factors. The optimum parameters for step 1 (acid esterification) were 4 h of reaction time, 4 wt. % of ferric sulfate amount, a 16:1 methanol to triglyceride mole ratio, and 400 rpm of mixing speed, respectively. For the transesterification step, the most influential factor was reaction time, and CaO amount was significant as well. On the other hand, the mole ratio of methanol and oil was relatively less significant. Optimum parameters were 3 h of reaction time, 2 wt. % of CaO, and a 12:1 methanol to triglyceride mole ratio with mixing speed at 400 rpm in this experimental range. Under the optimum conditions, waste cooking oil with 5.27 mg KOH/g of acid value was converted into crude biodiesel by a two-step process with fatty acid methyl ester content reaching 89.8 % without any further post-purification.     

Study on photocatalytic degradation of gaseous dichloromethane using pure and iron ion-doped TiO2 prepared by the sol-gel method

The synthesis of TiO₂ and Fe–TiO₂ by sol–gel method is demonstrated and characterized. The characterization of TiO₂ and Fe–TiO₂ is performed with instruments, including TGA/DTA, FTIR, UV–Vis, N₂ adsorption and SEM. Dichloromethane is used for the photocatalytic activity test. From the results of dichloromethane photocatalyitc degradation, the calcined temperature of TiO₂ and the presence of water vapor influence the photocatalytic activity. The optimum doping amount of iron ions is 0.005 mol%, and this can enhance the photocatalytic activity, while too great an amount will make the iron ions become recombination centers for the electron–hole pairs and reduce the photocatalytic activity. UV–Vis diffuse reflectance spectra of Fe–TiO₂ show an increase in absorbency in the visible light region with the increase in iron ions doping concentration The intermediate of dichloromethane photodegradation includes CHCl₃, CCl₄, CH₂Cl₂ and COCl₂. The presence of iron ions may reduce the adsorption of Cl element on the surface of the photocatalyst.     

Degradation of atrazine by modified stepwise-Fenton's processes

The removal of atrazine (ATZ) by stepwise Fenton's processes (stepwise-FP) was studied and the system models were developed through the examination of reaction kinetics. The study compared the performance of the removal of ATZ by conventional FP with stepwise-FP, where the total dose of H(2)O(2) was split and inputted into the system at different times and/or quantities. The performance of stepwise-FP was found to be better than that of conventional FP. This was probably due to the minimization of the peak concentration of H(2)O(2) in the solution, which reduced the probability that valuable H(2)O(2) and hydroxyl radicals would be consumed in forming weaker radicals. The reaction kinetics of the decay of ATZ in stepwise-FP was found to be a two-stage process; and in each stage, fast decay followed by stagnant decay was observed. Two characterized constants (the initial decay rate and the oxidative capacity) were introduced and were found to be useful in quantifying the stepwise-FP. The models for predicting stepwise-FP with respect to different dosing times and/or asymmetrical doses were developed, and were found to be very useful for evaluating the system performance and/or for process design.     

生物滴滤床净化含H2S废气的实验研究

采用生物滴滤床(BTF)对某制药厂污水站含H2S废气进行净化实验.结果表明,在循环营养液温度为25～30℃、pH为1～3、空床停留时间(EBRT)为13.5s、废气中H2S质量浓度在200～600 mg/m3时,BTF系统对H2S的去除率基本保持在90%以上,且稳定性良好;循环营养液中SO24-浓度的累积会降低系统H2S的去除率;随着BTF填料体积因压实而减小,H2S去除率减小.可通过改变系统操作条件或用稀碱液冲洗等方法防止填料堵塞;BTF系统在特殊工况下,具有较好的恢复性能.     

Decision analysis on fire safety design based on evaluating building fire risk to life

This study presents a framework of decision analysis on fire safety design alternatives based on evaluating building fire risk to life. A probabilistic risk assessment method for occupant life is presented with consideration of some uncertainties of evacuation process and fire development at first. For occupant evacuation time assessment, occupant pre-movement time is characterized by normal distribution. For onset time to untenable conditions assessment, its uncertainty is considered as probability distribution according to the range of design fires. Based on event tree technique, probable fire scenarios are analyzed with consideration of the effect of fire protection systems, employees extinguishing, etc. It is difficult to make a precise assessment on probability and consequence of every fire scenario, but their lower bound and upper bound can be achieved based on statistical data. Therefore, Supersoft Decision Theory [Malmnäs, P.E., 1995. Methods of Evaluation in Supersoft Decision Theory. Department of Philosophy, Stockholm University, 365 Stockholm; Johansson, H., Malmnäs, P.E., 2000. Application of supersoft decision theory in fire risk assessment. Journal of Fire Protection Engineering 14, 55–84] that allows decision maker to utilize vague statement is utilized to integrate with risk assessment to make decision on different fire safety design alternatives. To express how to make decision on different fire safety design alternatives based on evaluating building fire risk to life, two hypothetical fire safety design alternatives for a commercial building are presented.     

Combination of antibiotics suppressed the increase of a part of ARGs in fecal microorganism of weaned pigs

Environmental Science and Pollution Research - The presence of antibiotic resistance genes (ARGs) is one of the most important public health concerns. Six tetracycline resistance genes...