A 1-dodecanethiol-based phase transfer protocol for the highly efficient extraction of noble metal ions from aqueous phase

A 1-dodecanethiol-based phase-transfer protocol is developed for the extraction of noble metal ions from aqueous solution to a hydrocarbon phase, which calls for first mixing the aqueous metal ion solution with an ethanolic solution of 1-dodecanethiol, and then extracting the coordination compounds formed between noble metal ions and 1-dodecanethiol into a non-polar organic solvent. A number of characterization techniques, including inductively coupled plasma atomic emission spectroscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis demonstrate that this protocol could be applied to extract a wide variety of noble metal ions from water to dichloromethane with an efficiency of >96%, and has high selectivity for the separation of the noble metal ions from other transition metals. It is therefore an attractive alternative for the extraction of noble metals from water, soil, or waste printed circuit boards.     

Formation and speciation of disinfection byproducts during chlor(am)ination of aquarium seawater

The chemistry associated with the disinfection of aquarium seawater is more complicated than that of freshwater, therefore limited information is available on the formation and speciation of disinfection byproducts(DBPs) in marine aquaria. In this study, the effects of organic precursors, bromide(Br-) and pre-ozonation on the formation and speciation of several typical classes of DBPs, including trihalomethanes(THM4), haloacetic acids(HAAs),iodinated trihalomethanes(I-THMs), and haloacetamides(HAc Ams), were investigated during the chlorination/chloramination of aquarium seawater. Results indicate that with an increase in dissolved organic carbon concentration from 4.5 to 9.4 mg/L, the concentrations of THM4 and HAAs increased by 3.2–7.8 times under chlorination and by 1.1–2.3 times under chloramination. An increase in Br-concentration from 3 to 68 mg/L generally enhanced the formation of THM4, I-THMs and HAc Ams and increased the bromine substitution factors of all studied DBPs as well, whereas it impacted insignificantly on the yield of HAAs. Pre-ozonation with 1 mg/L O3 dose substantially reduced the formation of all studied DBPs in the subsequent chlorination and I-THMs in the subsequent chloramination. Because chloramination produces much lower amounts of DBPs than chlorination, it tends to be more suitable for disinfection of aquarium seawater.     

Immobilization of lead in anthropogenic contaminated soils using phosphates with/without oxalic acid

Understanding the effects of oxalic acid(OA) on the immobilization of Pb(Ⅱ) in contaminated soils by phosphate materials, has considerable benefits for risk assessment and remediation strategies for the soil. A series of phosphate amendments with/without oxalic acid were applied to two anthropogenic contaminated soils. We investigated the immobilization of Pb(Ⅱ) by KH2PO4, phosphate rock(PR), activated phosphate rock(APR) and synthetic hydroxyapatite(HAP) at different phosphate:Pb(P:Pb) molar ratios(0, 0.6, 2.0 and 4.0) in the presence/absence of 50 mmol oxalic acid/kg soil, respectively. The effects of treatments were evaluated using single extraction with deionized water or Ca Cl2, Community Bureau of Reference(BCR) sequential extraction and toxicity characteristic leaching procedure(TCLP)methods. Our results showed that the concentration of water extractable, exchangeable and TCLP-Pb all decreased with incubation time. The concentration of water-extractable Pb after120 days was reduced by 100% when soils were amended with APR, HAP and HAP + OA, and the TCLP-Pb was 5 mg/L for the red soil at P:Pb molar ratio 4.0. Water-soluble Pb could not be detected and the TCLP-Pb was 5 mg/L at all treatments applied to the yellow-brown soil. BCR results indicated that APR was most effective, although a slight enhancement of water-soluble phosphate was detected at the P:Pb molar ratio 4.0 at the beginning of incubation. Oxalic acid activated phosphates, and so mixing insoluble phosphates with oxalic acid may be a useful strategy to improve their effectiveness in reducing Pb bioavailability.     

Do vehicular emissions dominate the source of C6–C8 aromatics in the megacity Shanghai of eastern China?

The characteristic ratios of volatile organic compounds(VOCs) to i-pentane, the indicator of vehicular emissions, were employed to apportion the vehicular and non-vehicular contributions to reactive species in urban Shanghai. Two kinds of tunnel experiments, one tunnel with more than 90% light duty gasoline vehicles and the other with more than 60% light duty diesel vehicles, were carried out to study the characteristic ratios of vehicle-related emissions from December 2009 to January 2010. Based on the experiments, the characteristic ratios of C6–C8aromatics to i-pentane of vehicular emissions were 0.53 ± 0.08(benzene), 0.70 ± 0.12(toluene),0.41 ± 0.09(m,p-xylenes), 0.16 ± 0.04(o-xylene), 0.023 ± 0.011(styrene), and 0.15 ± 0.02(ethylbenzene), respectively. The source apportionment results showed that around 23.3% of C6–C8 aromatics in urban Shanghai were from vehicular emissions, which meant that the non-vehicular emissions had more importance. These findings suggested that emission control of non-vehicular sources, i.e. industrial emissions, should also receive attention in addition to the control of vehicle-related emissions in Shanghai. The chemical removal of VOCs during the transport from emissions to the receptor site had a large impact on the apportionment results. Generally, the overestimation of vehicular contributions would occur when the VOC reaction rate constant with OH radicals(k OH) was larger than that of the vehicular indicator, while for species with smaller k OH than the vehicular indicator, the vehicular contribution would be underestimated by the method of characteristic ratios.     

Effect of AlCl3 concentration on nanoparticle removal by coagulation

In recent years, engineered nanoparticles, as a new group of contaminants emerging in natural water, have been given more attention. In order to understand the behavior of nanoparticles in the conventional water treatment process, three kinds of nanoparticle suspensions, namely multi-walled carbon nanotube-humic acid (MWCNT-HA), multi-walled carbon nanotube-N,N-dimethylformamide (MWCNT-DMF) and nanoTiO₂-humic acid (TiO₂-HA) were employed to investigate their coagulation removal efficiencies with varying aluminum chloride (AlCl₃) concentrations. Results showed that nanoparticle removal rate curves had a reverse “U” shape with increasing concentration of aluminum ion (Al^3 +). More than 90% of nanoparticles could be effectively removed by an appropriate Al^3 + concentration. At higher Al^3 + concentration, nanoparticles would be restabilized. The hydrodynamic particle size of nanoparticles was found to be the crucial factor influencing the effective concentration range (ECR) of Al^3 + for nanoparticle removal. The ECR of Al^3 + followed the order MWCNT-DMF > MWCNT-HA > TiO₂-HA, which is the reverse of the nanoparticle size trend. At a given concentration, smaller nanoparticles carry more surface charges, and thus consume more coagulants for neutralization. Therefore, over-saturation occurred at relatively higher Al^3 + concentration and a wider ECR was obtained. The ECR became broader with increasing pH because of the smaller hydrodynamic particle size of nanoparticles at higher pH values. A high ionic strength of NaCl can also widen the ECR due to its strong potential to compress the electric double layer. It was concluded that it is important to adjust the dose of Al^3 + in the ECR for nanoparticle removal in water treatment.     

Effect of aeration rate on composting of penicillin mycelial dreg

Pilot scale experiments with forced aeration were conducted to estimate effects of aeration rates on the performance of composting penicillin mycelial dreg using sewage sludge as inoculation. Three aeration rates of 0.15, 0.50 and 0.90 L/(min·kg) organic matter(OM) were examined. The principal physicochemical parameters were monitored during the 32 day composting period. Results showed that the higher aeration rate of 0.90 L/(min·kg) did not corresponded to a longer thermophilic duration and higher rates of OM degradation;but the lower aeration rate of 0.15 L/(min·kg) did induce an accumulation of NH+4-N contents due to the inhibition of nitrification. On the other hand, aeration rate has little effect on degradation of penicillin. The results show that the longest phase of thermophilic temperatures ≥ 55°C, the maximum NO-3-N content and seed germination, and the minimum C/N ratio were obtained with 0.50 L/(min·kg) OM. Therefore, aeration rates of0.50 L/(min·kg) OM can be recommended for composting penicillin mycelial dreg.     

基于QSAR和ICE模型的磺胺类药物的水质基准研究

药物水环境污染是一个严重的环境问题,引起了人们越来越多的关注。磺胺类药物是一类广泛使用的药物。文章应用水质毒性快速检测仪测定一系列磺胺类药物的发光菌毒性,建立发光菌毒性QSAR模型,从而解决ICE模型的基准物种毒性数据缺失的问题。基于发光菌毒性测试和QSAR、ICE毒性估算方法获得更多毒性数据,初步推导了保护水生生物的磺胺类化合物的水质基准,并为建立更加具有生态统计学意义的物种敏感性分布(SSD)模型提供一定的数据支撑。同时,结合国内外水环境中磺胺类药物的暴露水平,对我国磺胺类药物的风险水平做了初步评估,其中磺胺甲恶唑、磺胺嘧啶和磺胺喹恶林的风险较高。     

郑州市环境空气中VOCs的空间分布及源解析

郑州市环境空气中挥发性有机物(VOCs)以芳香烃、醛酮类、烷烃类为主。各类挥发性有机物的年度平均浓度,芳香烃类为131μg/m3、烷烃类为118μg/m3、酮类为84.3μg/m3。年平均浓度最高的化合物为丙酮(66.2μg/m3)、乙醇(27.5μg/m3)、正十一烷(24.4μg/m3)和甲苯(17.2μg/m3)。挥发性有机物浓度在水平方向上的分布特征为城市老区和工业区最高,其他各功能区基本持平,但城市间的挥发性有机物污染分界不明显;高度方向上,40m左右达到浓度峰值;PCA和PMF源解析结果显示,机动车尾气和工业排放为主要污染源,分别占源总量的34%和19%。     

闸控河段水质浓度影响关键因子识别

由于闸门调度对河道内的水环境要素具有强烈的扰动作用,故闸控河段的水质变化过程较常规河道更为复杂。为了探析引起闸控河段水质浓度变化的主要制约因素,以槐店闸为研究对象,结合笔者进行的2次实验和其他时期的监测数据,通过偏相关分析和主成分分析的方法识别影响闸控河段水质浓度变化的关键因子,并利用多元线性回归方法分析得到闸控河段水质浓度变化与其关键因子的多元线性回归方程。经过分析初步得到,与高锰酸盐指数浓度变化率有关的关键因子为闸门开度、开启个数、高锰酸盐指数来水浓度、溶解氧含量、流速和水深;与氨氮浓度变化率有关的关键因子为闸门开度、开启个数、氨氮来水浓度、溶解氧含量和p H值。     

江苏省太湖流域农村生活污水处理技术评价

农村生活污水处理技术种类繁多,实际应用效果参差不齐,且各类技术缺乏对实际工程实施的指导。针对江苏省太湖流域农村生活污水排放特点,研究了毛细管渗滤沟处理技术、厌氧池-人工湿地组合工艺、厌氧滤池-氧化塘-生态渠技术、SBR-化学除磷和膜生物反应器等技术的工艺参数、处理效果、投资估算和操作管理要求,并对各项技术进行综合评估。针对不同的污水处理规模,总结不同地区相应的推荐处理技术。