Organochlorine contaminants in different tissues from Platichthys flesus (Pisces,Pleuronectidea)

Polychlorinated biphenyls (PCBs) and hexachlorobenzene (HCB) are organic contaminants that tend to accumulate in fish. Estuaries are exposed to high anthropogenic activities, therefore tending to accumulate more contaminants than the adjacent coastal waters. Platichthys flesus, a fish with high economic value, was analysed for PCBs and HCB along its different age groups, in liver, gills, gonads and muscle. Younger fishes were caught in the estuary, whereas older fishes were caught in the adjacent coastal waters and acquired at Figueira da Foz Regional Office of Docapesca-Portos e Lotas, SA. Both contaminants concentrations follow the pattern: liver > gills > muscle. Hepatosomatic index had the lowest values in younger fishes and the highest values in older fishes. Condition factor values remain stable with age. Younger fishes had higher PCBs concentrations than the older fishes. In opposition HCB was only detected in fish from 3+ to 5+ and its concentration tended to increase with age. Overall P. flesus is considered safe for human intake.     

Mercury bioaccumulation and decontamination kinetics in the edible cockle Cerastoderma edule

Mercury bioaccumulation and decontamination kinetics in the edible cockle Cerastoderma edule were studied through a mesocosms experiment after a medium-term exposure to the metal.The results revealed that the bivalve presented distinct bioaccumulation kinetics according to the different tissues. While the gills showed a linear accumulation pattern, the digestive gland and the entire organism presented a saturation model, with higher accumulation during the first 7d of exposure and lower during the rest of the time. In addition, the bioaccumulation rate was not proportional to the Hg concentration, since the organisms under lower contamination presented higher bioconcentration factors than the ones under higher contamination. Gills were the tissues with higher mercury accumulation capability.Concerning the decontamination phase, C. edule lost approximately 80% of the mercury after 24 h exposure in clean seawater. Nevertheless, never reached the original condition, showing in the final (20 d detox), Hg levels (>0.5 ppm) higher than those allowed by the legislation regulating human food consumption. This represents a matter of concern for Human health.     

Sources of potentially toxic elements and organic pollutants in an urban area subjected to an industrial impact

Urban and industrial development has caused a major impact on environmental soil quality. This work assesses the extent and severity of contamination in a small urban area subjected to an industrial impact and identifies the major anthropogenic inputs. Twenty-six soil samples were collected from agricultural and urban sites, and concentrations of potentially toxic elements (As, Cd, Cu, Cr, Fe, Mn, Ni, Pb and Zn), PAHs and PCBs, were determined. In spite of the low median concentrations observed, some sites represent a potential hazard for human health and ecosystems. Concentrations of contaminants were higher than those found in a nearby city, indicating that the study area is affected by the surrounding industry. The use of multivariate statistical analyses allowed for the identification of the main factors controlling the variability of potentially toxic elements and organic pollutants in the soils. The presence of Cr, Fe, Mn and Ni was associated with geogenic inputs, and Cu, Pb, Zn, As, PAHs and PCBs were associated with anthropogenic inputs. Industry and traffic were the most important anthropogenic sources. Soil characteristics were identified as important factors controlling the spatial variability of elements, both from recognised natural and anthropogenic origin. Differences between land uses were observed, which may be attributed to both management practices and proximity to sources.     

Major inputs and mobility of potentially toxic elements contamination in urban areas

Soil quality in urban areas is affected by anthropogenic activities, posing a risk to human health and ecosystems. Since the pseudo-total concentrations of potentially toxic elements may not reflect their potential risks, the study of element mobility is very important on a risk assessment basis. This study aims at characterising the distribution and major sources of 34 elements in two Portuguese urban areas (Lisbon and Viseu), with different geological characteristics, industrial and urban development processes. Furthermore, the potential availability of As, Co, Cr, Cu, Ni, Pb and Zn was assessed, by measuring the fraction easily mobilised. Lisbon is enriched in elements of geogenic and anthropogenic origin, whereas in the smaller city, the high levels observed are mainly related to a geogenic origin. Background values can be more relevant than the dimension of the city, even when anthropogenic components may be present, and this parameter should be considered when comparing results from different cities. Regarding the potential available fraction, a high variability of results was observed for elements and for sampling sites with an influence of the soil’s general characteristics. Elements showing very high concentrations due to geological reasons presented, in general, a low mobility and it was not dependent on the degree of contamination. For elements with major anthropogenic origin, only Zn was dependent on the pseudo-total content. Yet, the highest available fractions of some elements, both with major geogenic and anthropogenic origin, were observed in specific contaminated samples. Therefore, a site-specific evaluation in urban soils is important due to the high spatial variability and heterogeneity.     

Mercury pollution in Ria de Aveiro (Portugal): a review of the system assessment

The Ria de Aveiro (Portugal) is a coast al lagoon adjacent to the Atlantic Ocean and it has an inner bay (Laranjo bay) that received a highly contaminated effluent discharged by a mercury cell chlor-alkali plant from the 1950s until 1994. The aim of this study is to review in a holistic way several research studies that have been carried out in the Ria de Aveiro, in order to evaluate the remobilization of the mercury accumulated within the system and the recovery of the lagoon. The spatial distribution of the total mercury in the surrounding terrestrial environment has also been considered. Results indicate that the main mercury contamination problems in the Ria de Aveiro are confined to the Laranjo bay. Mercury export to the coastal waters and its impact on the nearshore compartments (water column, sediment and biota) are low. No direct effects of the mercury from nearby industrial activities were detected in Aveiro's urban soils, although historical mercury contamination is still affecting soil quality in the immediate vicinity of the chlor-alkali plant, located in Estarreja. Moreover, macrophyte harvesting for human direct or indirect use and the consumption of mussels, crabs and the sea bass from the Laranjo bay may constitute a health risk. Further studies focusing on developing skills for the restoration of the ecosystem are presently underway.     

Tipping Elements in the Arctic Marine Ecosystem

The Arctic marine ecosystem contains multiple elements that present alternative states. The most obvious of which is an Arctic Ocean largely covered by an ice sheet in summer versus one largely devoid of such cover. Ecosystems under pressure typically shift between such alternative states in an abrupt, rather than smooth manner, with the level of forcing required for shifting this status termed threshold or tipping point. Loss of Arctic ice due to anthropogenic climate change is accelerating, with the extent of Arctic sea ice displaying increased variance at present, a leading indicator of the proximity of a possible tipping point. Reduced ice extent is expected, in turn, to trigger a number of additional tipping elements, physical, chemical, and biological, in motion, with potentially large impacts on the Arctic marine ecosystem.     

Kinetic of formation for single carbon dioxide and mixed carbon dioxide and tetrahydrofuran hydrates in water and sodium chloride aqueous solution

A laboratory-scale reactor system is built and operated to measure the kinetic of formation for single and mixed carbon dioxide–tetrahydrofuran hydrates. The T-cycle method, which is used to collect the kinetic data, is briefly discussed. For single carbon dioxide hydrate, the induction time decreases with the increase of the initial carbon dioxide pressure up to 2.96 MPa. Beyond this pressure, the induction time is becoming relatively constant with the increase of initial carbon dioxide pressure indicating that the liquid phase is completely supersaturated with carbon dioxide. Experimental results show that the inclusion of tetrahydrofuran reduces the induction time required for hydrate formation. These observations indicate hydrate nucleation process and onset growth are more readily to occur in the presence of tetrahydrofuran. In contrast, the presence of sodium chloride prolongs the induction time due to clustering of water molecules with the ions and the salting-out effects. It is also shown that the degree of subcooling required for hydrate formation is affected by the presence of tetrahydrofuran and sodium chloride in the hydrate forming system. The presence of tetrahydrofuran in the hydrate system significantly reduces the amount of carbon dioxide uptake. The apparent rate constant, k, for those systems are reported.     

Effects of tertiary treatment by fungi on organic compounds in a kraft pulp mill effluent

Background, aim and scope  

Pulp and paper mills generate a plethora of pollutants depending upon the type of pulping process. Efforts to mitigate the environmental impact of such effluents have been made by developing more effective biological treatment systems in terms of biochemical oxygen demand, chemical oxygen demand, colour and lignin content. This study is the first that reports an evaluation of the effects of a tertiary treatment by fungi (Pleurotus sajor caju, Trametes versicolor and Phanerochaete chrysosporium and Rhizopus oryzae) on individual organic compounds of a Eucalyptus globulus bleached kraft pulp and paper mill final effluent after secondary treatment (final effluent).     

Effects of solar radiation on the fluorescence properties and molecular weight of fulvic acids from pulp mill effluents

The pulp and paper industry generates large volume of wastewater that adversely affects water resources. Lignin derived macromolecular compounds, similar to natural humic substances, are the main waste products in the pulp mill effluents. The UV-Vis and fluorescence spectroscopies were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. Solar irradiation of the solutions of these fulvic acids caused solution acidification and decay both in the UV-Vis absorbance and in the fluorescence. This decay was not the same for the whole spectra but pointed to the selective photodegradation of lignin typical structures. Furthermore, by sequential ultrafiltration it was found that during irradiation, the high-molecular weight fractions were destroyed and low-molecular-weight constituents, potentially more able to penetrate the cell membranes of living organisms were formed. Photodegradation of macromolecular organic matter from a kraft pulp mill effluent may be a key process occurring in natural waters that modifies the physicochemical properties of such effluents.