Applying the precautionary principle to consumer household cleaning product development

Hazardous chemicals are pervasive in household disinfectant products. Many ingredients have established associations with acute and chronic human health conditions as well as with environmental damage. Although these associations are suggested but not proven, they are of great concern. This article describes the application of the precautionary principle to the selection of an anti-microbial active ingredient for a botanical disinfectant when significant uncertainty exists around the hazard and risk of traditional disinfectant active ingredients. We show that application of the precautionary principle does not stifle innovation and facilitates a responsible approach to product development.     

建立我国海滩质量标准分级体系的探讨

在参考国内外主要海滩质量标准评价体系的基础上,论文根据我国海滩的具体状况,提出适合我国国情的海滩质量标准体系。标准体系包括自然和社会经济两类共54个因子,对不同开发程度的海滩实行不同的评分标准,最终将海滩分为钻石、金、银、铜及不及格5个等级。论文对山东和福建共6个不同开发程度(开发成熟,低度开发/未开发)的海滩进行了试点应用,结果表明,厦门黄厝得分最高,霞浦大京得分最低。同时解释所提出标准的适用性,并对海滩资源可持续开发利用提出管理对策。     

Random parameter models for accident prediction on two-lane undivided highways in India

Introduction

Generalized linear modeling (GLM), with the assumption of Poisson or negative binomial error structure, has been widely employed in road accident modeling. A number of explanatory variables related to traffic, road geometry, and environment that contribute to accident occurrence have been identified and accident prediction models have been proposed. The accident prediction models reported in literature largely employ the fixed parameter modeling approach, where the magnitude of influence of an explanatory variable is considered to be fixed for any observation in the population. Similar models have been proposed for Indian highways too, which include additional variables representing traffic composition. The mixed traffic on Indian highways comes with a lot of variability within, ranging from difference in vehicle types to variability in driver behavior. This could result in variability in the effect of explanatory variables on accidents across locations. Random parameter models, which can capture some of such variability, are expected to be more appropriate for the Indian situation.

Method

The present study is an attempt to employ random parameter modeling for accident prediction on two-lane undivided rural highways in India. Three years of accident history, from nearly 200 km of highway segments, is used to calibrate and validate the models.

Results

The results of the analysis suggest that the model coefficients for traffic volume, proportion of cars, motorized two-wheelers and trucks in traffic, and driveway density and horizontal and vertical curvatures are randomly distributed across locations.

Conclusions

The paper is concluded with a discussion on modeling results and the limitations of the present study.     

A Bayesian assessment of the effect of highway bypasses in Iowa on crashes and crash rate

Introduction

A common contention is that the construction of highway bypasses negatively impacts the economy of local communities by reducing pass-by traffic for businesses. However, as access to specific business' account records is limited, this impact is difficult to quantify. Another common contention is that bypasses contribute to a reduction in overall crashes in the community and in the surrounding areas. Even though a large number of bypasses have been constructed in the State of Iowa over the past several years, their actual impact in terms of traffic safety has not been quantified.

Objectives

This study seeks answers to the following questions: (a) Are bypasses in Iowa associated with a reduction in crash frequencies and crash rates on the bypassed highway? (b) Do bypasses in Iowa introduce a reduction of overall crash frequencies and rates or do they merely shift crashes from the highways through the communities to the bypasses with no significant overall reduction?

Method

We obtained crash information from the Iowa DOT at 19 sites on which a bypass was constructed sometime during the past 23 years. We also obtained the same information at six sites used as comparison sites on which no bypasses were constructed at least until 2005. We them employed a Bayesian approach to estimating the association between the construction of the bypass and crash rates, while also accounting for other factors.

Results

The construction of bypasses in Iowa is associated with a significant increase in traffic safety both on the main road through town and on the combined main road and bypass roadway.     

Validating an evidence-based, self-rated fall risk questionnaire (FRQ) for older adults

Background

Falls are a common, serious, and often unrecognized problem facing older adults. The objective of this study was to provide an initial clinical and statistical validation for a public health strategy of fall risk self-assessment by older adults using a Fall Risk Questionnaire (FRQ).

Methods

Adults age 65 + (n = 40) were recruited at a Los Angeles Veterans Affairs (VA) medical facility and at a local assisted living facility. Participants completed the FRQ self-assessment and results were compared to a “gold standard” of a clinical evaluation of risks using the American/British Geriatrics Society guidelines to assess independent predictors of falls: history of previous falls, fear of falling, gait/balance, muscle weakness, incontinence, sensation and proprioception, depression, vision, and medications. For the comparison, we used an iterative statistical approach, weighing items based on relative risk.

Results

There was strong agreement between the FRQ and clinical evaluation (kappa = .875, p < .0001). Individual item kappa values ranged from .305-.832. After dropping one FRQ item (vision risk) because of inadequate agreement with the clinical evaluation (kappa = .139, p = .321), the final FRQ had good concurrent validity.

Conclusions

The FRQ goes beyond existing screening tools in that it is based on both evidence and clinical acceptability and has been initially validated with clinical examination data. A larger validation with longitudinal follow-up should determine the actual strength of the FRQ in predicting future falls.     

Modelling spills of water-reactive chemicals

This paper describes part of a programme of work undertaken at the Health and Safety Laboratory (HSL) to investigate the behaviour of selected water-reactive chemicals. Following an accidental release, such substances react exothermically with any water present, generating acidic vapours. The STAWaRS (Source Term Assessment of Water Reactive Substances) software was developed for the Health and Safety Executive (HSE) by ESR Technology to model this complex process. The aims of the study described here were to provide experimental validation of the heats of hydrolysis used within STAWaRS, and to perform sensitivity studies on selected STAWaRS input parameters.The heat of hydrolysis of acetyl chloride was measured and showed good correlation with the value used within STAWaRS. Some of the variables that influence the severity of acetyl chloride spills are examined, with reference to predictions made by the STAWaRS model. The heats of hydrolysis of titanium tetrachloride previously measured at HSL are also discussed, and the effect of adopting these experimentally derived values for modelling spills is shown for a hypothetical land use planning case. This study demonstrates the importance of using experimentally validated values for STAWaRS input parameters.     

Numerical simulation of propane detonation in medium and large scale geometries

A modelling strategy has been developed for consequence analysis of medium and large scale gaseous detonation. The model is based on the solution of Euler equations with one-step chemistry. The Van Leer flux limited method which is a total variation diminishing scheme is used for shock capturing. Preliminary calculations were firstly conducted for small domains with fine grids which resolve the wave, relatively coarse grids which have less than 10 grids across the wave and coarse grids in which the minimum grid size is larger than the wave thickness to ensure that the reaction scheme has been properly tuned to capture the correct detonation pressure, temperature and velocity in the resolutions used in the different cases. The model was firstly tested against a medium scale detonation test in a shock tube with U-bends. Reasonably good agreement is achieved on detonation pressure and mean shock wave velocities at different measuring segments of the tube. Following the validation, the detonation of a hypothetical planar propane-air cloud is simulated. The predictions uncovered some interesting features of such large scale detonation phenomena which are of significance in the safety context, especially for accidental investigations. The findings from the present analysis are in line with the forensic evidence on damages in some historic accidents and challenges previous analysis of a major accident in which forensic evidence suggested localised detonation but was considered as the consequence of fire storms by the investigation team.