Elaboration of new formulations to remove micropollutants in MSWI flue gas

This study consists in identifying and testing potential inorganic substitutes to carbon based materials commonly used as adsorbents for the removal of organic pollutants such as dioxins and furans released from Municipal Solid Waste Incinerators (MSWI). Although carbon materials enable to reach the current regulation in terms of dioxins and furans emissions, they exhibit a potential auto ignition risk when present in hot flue gases. Here, the adsorption potential of carbon based products is compared to the one of some inorganic materials. Chlorobenzene was chosen as a reference molecule to compare the removal performance of the different adsorbents. This comparison was based on the determination of the adsorption energies derived from temperature programmed desorption (TPD) experiments. In the first part of this study, five inorganic materials were selected according to their chlorobenzene adsorption performance compared to those of carbon based products currently used to remove micropollutants from MSWI flue gases. In the second part of the study, the influence of the inlet concentration of adsorbate on the adsorption potential of sorbents is investigated. Actually, the organic compound concentration was decreased in order to be closer to those met in MSWI. Furthermore, the adsorption experiments were performed with other adsorbates whose molecular mass or chlorine content are higher. Thanks to these adsorption results a new organic free formulation has been proposed for the removal of micropollutants. Tests carried out on an industrial scale, demonstrated that this product enables to reach the current norm concerning dioxins and furans emissions.     

Nonmethane Organic Compound to Nitrogen Oxide Ratios and Organic Composition in Cities and Rural Areas

The observed ranges in nonmethane organic compound (NMOC) concentrations, NMOC composition and nitrogen oxides (NO_X) concentrations have been evaluated for urban and nonurban areas at ground level and aloft of the contiguous United States. The ranges in NMOC to NO_X ratios also are considered. The NMOC composition consistently shifts towards less reactive compounds, especially the alkanes, in air parcels over nonurban areas compared to the NMOC composition near ground level within urban areas. The values for the NMOC to NO_X ratios, 1.2 to 4.2, in air aloft over nonurban areas are lower than in air at ground level urban sites, ≥8, and much lower than in air at ground level nonurban sites, ≥20.

The layers of air aloft over a number of nonurban areas of the United States tend to accumulate NO_X emissions from the tall stacks of large fossil fuel power plants located at nonurban sites. During the night into the morning hours, the air aloft is isolated from any fresh NMOC emissions predominately coming from near surface sources. Conversely, during this extended period of restricted vertical mixing, air near the surface accumulates NMOC emissions while this air is isolated from the major NO_X sources emitting aloft. These differences in the distribution of NMOC and NO_X sources appear to account for the much larger NMOC to NO_X ratios reported near ground level compared to aloft over nonurban areas.

Two types of experimental results are consistent with these conclusions: (1) observed increases in surface rural NO_X concentrations during the morning hours during which the mixing depth increases to reach the altitude at which NO_X from the stacks of fossil fuel power plants is being transported downwind; (2) high correlations of total nitrate at rural locations with Se, which is a tracer for coal-fired power plant NO_X emissions.

The implications of these conclusions from the standpoint of air quality strategies are suggested by use of appropriate scenarios applied to both urban and regional scale photochemical air quality models. The predictions from urban model scenarios with NMOC to NO_X ratios up to 20 are that NO_X control will result in the need for the control of more NMOC emissions than necessary in the absence of NO_X control, in order to meet the O₃ standard. On a regional scale, control of NO_X emissions from fossil fuel power plants has little overall effect regionally but does result on a more local scale in both small decreases and increases in O₃ concentrations compared to the baseline scenario without NO_X control. The regional modeling results obtained to date suggest that NO_X control may be effective in reducing O₃ concentrations only for a very limited set of conditions in rural areas.     

Coupled production and transport of selenium vapor in unsaturated soil: evaluation by experiments and numerical simulation

Volatilization of selenium (Se) from soil to the atmosphere involves several sequential chemical reactions that form volatile Se species, followed by transport of the gaseous Se through the soil. This paper describes a numerical model that simulates the chemical and physical processes governing the production and transport of Se vapor in unsaturated soil. The model couples the four Se species involved in the production of Se vapor through chemical reactions, and allows each to migrate through the soil by advection, liquid or vapor diffusion depending on its affinity for the dissolved or vapor phase. The coupled transformations and transport of the four Se species, i.e., selenate, selenite, elemental and organic Se, and Se vapor, were calculated based on the Crank-Nicolson finite difference method. The model was used to analyze fluxes of Se vapor measured from a soil amended with inorganic Se in the form of selenate and covered with unamended clean soil of various thicknesses. Evolution of Se vapor from the soil was very fast, with measurable amounts of Se detected within 24 h. The peak of Se volatilization, detected at the 6th day, reached 3.31 Se microgram/day for the uncovered soil, but was reduced to near the detection limit (0.05 microgram/day) in the presence of a 8- or 16-cm clean soil cover. With two reaction rate coefficients fitted to the data, the model described Se volatilization very well. The estimated rate coefficient of Se methylation was unexpectedly high, with a value of 0.167/day. The net volatilization of Se, however, was severely inhibited by the fast demethylation, i.e., the reverse reaction which converted volatile Se species back into nonvolatile forms. As a result, Se vapor only penetrated a few centimeters in the soil. The demethylation rate coefficient, assessed by independent transport experiments using dimethyl selenide, was estimated as 186.8/day, corresponding to a half-life of only 5.3 min for Se vapor. Results of this study indicated that rapid demethylation of Se vapor during its diffusive transport through a soil is probably an important limiting factor in the volatilization of Se under natural conditions.     

Evaluation of catalyzed and electrically heated filters for removal of particulate emissions from diesel-A- and JP-8-fueled engines

In-service diesel engines are a significant source of particulate matter (PM) emissions, and they have been subjected to increasingly strict emissions standards. Consequently, the wide-scale use of some type of particulate filter is expected. This study evaluated the effect of an Engelhard catalyzed soot filter (CSF) and a Rypos electrically heated soot filter on the emissions from in-service diesel engines in terms of PM mass, black carbon concentration, particle-bound polycyclic aromatic hydrocarbon concentration, and size distribution. Both filters capture PM. The CSF relies on the engine's exhaust to reach the catalyst regeneration temperature and oxidize soot, whereas the electrically heated filter contains a heating element to oxidize soot. The filters were installed on several military diesel engines. Particle concentrations and compositions were measured before and after installation of the filter and again after several months of operation. Generally, the CSF removed at least 90% of total PM, and the removal efficiency improved or remained constant after several months of operation. In contrast, the electrical filters removed 44-69% of PM mass. In addition to evaluating the soot filters, the sampling team also compared the results of several real-time particle measurement instruments to traditional filter measurements of total mass.     

Adsorption of phenolic compounds by activated carbon--a critical review

Adsorption of phenol and its derivatives on activated carbons is considered based on numerous papers related to this issue. Special attention is paid to the effects of carbon surface functionalities, pH of solution and heterogeneity effects that accompany adsorption of phenolic compounds. Moreover, in this paper the most important aspects are overviewed referring to irreversible adsorption of phenols and impact of different substituents of phenolic compounds on their uptake by activated carbons is considered. Finally, some remarks pertaining to applications of novel adsorbents for phenol adsorption are discussed and illustrated by means of a few examples.     

Equilibrium nonaqueous phase liquid pool geometry in coarse soils with discrete textural interfaces

This paper presents a model for the geometry of nonaqueous phase liquid (NAPL) pools and mounds in homogeneous soils and soils with discrete textural interfaces. It is shown that the concepts of capillary pressure-saturation curve hysteresis and entry pressures are integral to the complete conceptualization of pool and mound geometry. Unless hysteresis is included in the analysis, light NAPL (LNAPL) in homogeneous soils cannot exist in pools at all, and dense NAPL (DNAPL) will not mound on horizontal textural interfaces unless lateral confining boundaries are present. The proposed model also implies that remobilization of DNAPL pools will occur at lower hydraulic gradients than those predicted with previous models. Comparing predicted and experimental DNAPL and LNAPL pool thicknesses and the location of an LNAPL lens with respect to the top of the capillary fringe validate the model.     

Historical marine ecology: examining the role of fisheries in changes in North Sea benthos

The organisms living on and in the sea floor, the benthos, represent an important ecological group. Although some (shellfish) have an economic value, most do not, and so little long-term data are available. We have identified three sources of historic benthic data for the North Sea, a regional sea that has been subjected to multiple human impacts for at least several hundred years. Each dataset has its limitations, but by their use together some issues emerge. Wider community shifts were observed in the shorter term and a number of extirpations at the scale of the North Sea were seen over longer time scales. The extirpated taxa share a number of characteristics consistent with an effect of fisheries such as fragile morphology. We must concentrate now on furthering our understanding of the ecological significance of shifts in dominance of particular functional units and protecting those habitats and species most vulnerable to fisheries-driven extirpation.     

Continuous measurement of peroxyacetyl nitrate (PAN) in suburban and remote areas of western China

Knowledge on atmospheric abundance of peroxyacetyl nitrate (PAN) is important in assessing the severity of photochemical pollution, and for understanding chemical transformation of reactive odd nitrogen and its impact on the budget of tropospheric ozone (O₃). In summer 2006, continuous measurements of PAN were made using an automatic GC–ECD analyzer with an on-line calibrator at a suburban site of Lanzhou (LZ) and a remote site of Mt. Waliguan (WLG) in western China, with concurrent measurements of O₃, total reactive nitrogen (NO_y) and carbon monoxide (CO). At LZ, several photochemical episodes were observed during the study, and the average mixing ratio of PAN (plus or minus standard deviation) was 0.76 (±0.89) ppbv with the maximum value of 9.13 ppbv, compared to an average value of 0.44 (±0.16) ppbv at remote WLG. The PAN mixing ratios in LZ exhibited strong diurnal variations with a maximum at noon, while enhanced concentrations of PAN were observed in the evening and a minimum in the afternoon at WLG. The daily O₃ and PAN concentration maxima showed a strong correlation (r² = 0.91) in LZ, with a regression slope (PAN/O₃) of 0.091 ppbv ppbv^?1. At WLG, six well-identified pollution plumes (lasting 2–8 h) were observed with elevated concentrations of PAN (and other trace gases), and analysis of backward particle release simulation shows that the high-PAN events at WLG were mostly associated with the transport of air masses that had passed over LZ.     

Impact of large scale circulation on European summer surface ozone and consequences for modelling forecast

In this study, we investigate the benefit for European ozone simulation of using day-to-day varying chemical boundary conditions produced by a global chemical weather forecast platform instead of climatological monthly means at the frontiers of a regional model. We performed two simulations over Europe using the regional (0.5 × 0.5°) CHIMERE CTM forced by global scale simulations based on the LMDz-INCA CTM. For summer 2005, ozone differences exceeding 20 ppb can be punctually found between these two simulations in the borders of the domain. The mean of the differences ranges between 0 and 3 ppb beyond 15° of the frontiers of the regional model.Correlations with ground-based ozone measurements at more than 400 stations are slightly increased by the use of daily boundary conditions. The simulation of the temporal variability is significantly enhanced in particular for the daily means and daily maxima. As expected, the gain is higher at the borders of the regional domain.The change of percentile distribution shows that the net impact of high temporal resolution boundary conditions is not of major concern for surface ozone peaks which are mainly due to local photochemistry. The use of daily boundary conditions is however necessary to correctly simulate concentrations in the 20–35 ppb range which are of crucial interest for human and vegetation exposure effects.