Determining Attenuation of Impulse Noise With an Electrical Equivalent of a Hearing Protection Device

Determining the effectiveness of impulse noise attenuation with hearing protection devices (HPDs) is an important part of their selection. Measuring impulse noise parameters under an HPD would involve exposing subjects to impulses with a high peak sound pressure level. This paper presents a computational method of determining impulse noise parameters under the cups of earmuffs. Calculations are done using the transfer function of earmuffs, determined with Shaw’s electrical equivalent of an HPD, taking into account the design parameters of earmuffs. The developed method was used for calculations in the presence of impulse noise generated by gunshots. To verify the computational method, the results of these calculations were compared with the results of measurements.     

Sediment phosphorus extractants for phosphorus-31 nuclear magnetic resonance analysis: a quantitative evaluation

The influence of pre-extractant, extractant, and post-extractant on total extracted amounts of P and organic P compound groups measured with 31P nuclear magnetic resonance (31P-NMR) in lacustrine sediment was examined. The main extractants investigated were sodium hydroxide (NaOH) and sodium hydroxide ethylenediaminetetraacetic acid (NaOH-EDTA) with bicarbonate buffered dithionite (BD) or EDTA as pre-extractants. Post extractions were conducted using either NaOH or NaOH-EDTA, depending on the main extractant. Results showed that the most efficient combination of extractants for total P yield was NaOH with EDTA as pre-extractant, yielding almost 50% more than the second best procedure. The P compound groups varying the most between the different extraction procedures were polyphosphates and pyrophosphates. NaOH with BD as pre-extractant was the most efficient combination for these compound groups.     

Level and origin of iodine-129 in the Baltic Sea

Environmental samples, such as seawater, seaweed, lake water, lake sediment and grass collected from the Baltic Sea area were analyzed for 129I and 127I by radiochemical neutron activation analysis. In 2000, the concentration of 129I in the seawater from Borholm and M?en in the Baltic Sea has reached 6.0 x 10(-13) and 16 x 10(-13) g/l, respectively, these are more than two orders of magnitude higher than the global fallout level. The highest value of 270 x 10(-13) g/l being found in the seawater from the Kattegat. By comparison of the level of 129I in the lake water and precipitation in this region, it is estimated that more than 95% of 129I in the Baltic Sea originates from reprocessing emissions, especially from the French nuclear fuel reprocessing plant at La Hague. More than 30% of 129I in the south Baltic and 93% in the Kattegat directly originates from the marine discharges of the European reprocessing plants.     

Fauna of the green alga Cladophora glomerata in the Baltic Sea: density, diversity, and algal decomposition stage

The green alga Cladophora glomerata (L.) is a common macrophyte in the northern Baltic Sea, where it forms drifting mats during summer. We studied the effect of its stage of decomposition on the density, diversity, and resource usage of associated meio- and macrofauna. We hypothesised that mobile species would show small variation in food preferences among decomposition stages, while high variation was expected in stationary species, as reflected in their stable isotope signatures. The assemblage structure of the fauna differed between the 3 studied algal degradation stages, Green (attached, healthy), Degraded (attached, but starting to decay), and Drift (detached, decaying). C/N ratios were highest in green algae and decreased in decaying algal stages. Variation in stable isotope ratios of stationary and mobile species supported our resource use hypothesis. The decomposition stage of C. glomerata significantly affected the carbon and nitrogen stable isotope ratios of both the alga and its main grazer species. Higher invertebrate diversity in the more decaying stages was probably facilitated by decomposer microbes adding resource types and by the proximity of the detached algal mats to the sediment.     

Does the wood-borer Sphaeroma terebrans (Crustacea) shape the distribution of the mangrove Rhizophora mucronata?

Field surveys were conducted to evaluate the occurrence of the isopod borer Sphaeroma terebrans (Crustacea) in aerial roots (prop roots) of the red mangrove Rhizophora mucronata on several different spatial scales (m to 100 km) in East Africa. In 6 out of 17 sites studied in Kenya and on Zanzibar Island, Tanzania, no signs of the isopods were found. When the isopods were present the frequency of infestation was high. Trees in muddy substrates in the lower intertidal, in particular at fringing channels or the open sea, showed high prevalence and intensity of infestation, with large part of their roots damaged or dead. Trees at the upper range of Rhizophora, in sandy and muddy areas, showed no signs of isopod infestation. This pattern recurred in mangrove forests on large spatial scales and there was no indication that island forests differed from the mainland forests. This indicates that sediment characteristics, vertical height in the tidal zone, and direct exposure to incoming water are the major factors controlling the abundance of S. terebrans. The isopod may play an important role in determining the lower intertidal limits of R. mucronata. Trees with numerous dead or nongrowing roots, as result of Sphaeroma attack, are likely to tumble due to a lack of root support and this is most likely to occur along channels at the lower, muddy intertidal. Tumbled trees were frequently observed along channels in the lower, muddy intertidal, but rarely in the mid or high intertidal. Implications for management of mangrove forests are discussed.     

UN/ECE ICP Materials Dose-response Functions for the Multi-pollutant Situation

A “multi-pollutant exposure programme” reflecting the new pollution situation where SO₂ is no longer the dominating pollutant has been performed by the International Co-operative Programme on Effects on Materials, including Historic and Cultural Monuments (ICP Materials) within the activities of the Convention on Long-range Transboundary Air Pollution. The main results obtained in the period 1997–2003 are summarised. Dose-response functions are presented for carbon steel, zinc, copper, bronze and limestone. Parameters involved in the functions include besides SO₂ and pH, which were included in the previously developed functions from ICP Materials, also the effect of particulate matter and HNO₃.     

Organochlorine compounds in red deer (Cervus elaphus L.) and fallow deer (Dama dama L.) from inland and coastal Croatia

Polychlorinated biphenyl (PCB) and organochlorine pesticide (OCP) levels in fat tissue of red and fallow deer (Cervus elaphus L. and Dama dama L.) from two inland and an Adriatic area were established. Of 17 analysed PCBs, PCB-28, PCB-138, PCB-153, PCB-180 and PCB-118 were found in all samples, whilst PCB-101 and PCB-170 were found in more than 50% of samples. They ranged between 0.03 and 5.98 ng g(-1) fat weight. Of seven analysed OCPs, HCB, γ-HCH and 1,1-dichloro-2,2-di(4-chlorophenyl)ethylene (DDE) were found in all samples, whilst β-HCH was found in more than 50% of samples. They ranged between 0.17 and 22.14 ng g(-1) fat weight. The dominating compounds were DDE, PCB-138, PCB153, PCB-118 and PCB-180. According to the Duncan multistage test, the levels of PCB-138, PCB-153, PCB 170 and PCB-180 were significantly higher in perirenal fat samples of specimens taken from the Adriatic area. DDE was significantly higher in the inland deer samples. Some species differences were determined and were mostly related to higher PCB and β-HCH levels in fallow deer samples and higher DDE levels in red deer samples. No sex difference was established. As for age, significantly higher levels of PCB-118 and PCB-52 were found in fawns.     

Analysis of brood sex ratios: implications of offspring clustering

Generalized linear models (GLMs) are increasingly used in modern statistical analyses of sex ratio variation because they are able to determine variable design effects on binary response data. However, in applying GLMs, authors frequently neglect the hierarchical structure of sex ratio data, thereby increasing the likelihood of committing 'type I' error. Here, we argue that whenever clustered (e.g., brood) sex ratios represent the desired level of statistical inference, the clustered data structure ought to be taken into account to avoid invalid conclusions. Neglecting the between-cluster variation and the finite number of clusters in determining test statistics, as implied by using likelihood ratio-based L²-statistics in conventional GLM, results in biased (usually overestimated) test statistics and pseudoreplication of the sample. Random variation in the sex ratio between clusters (broods) can often be accommodated by scaling residual binomial (error) variance for overdispersion, and using F-tests instead of L²-tests. More complex situations, however, require the use of generalized linear mixed models (GLMMs). By introducing higher-level random effects in addition to the residual error term, GLMMs allow an estimation of fixed effect and interaction parameters while accounting for random effects at different levels of the data. GLMMs are first required in sex ratio analyses whenever there are covariates at the offspring level of the data, but inferences are to be drawn at the brood level. Second, when interactions of effects at different levels of the data are to be estimated, random fluctuation of parameters can be taken into account only in GLMMs. Data structures requiring the use of GLMMs to avoid erroneous inferences are often encountered in ecological sex ratio studies.