Links between chronic exposure to outdoor air pollution and cardiovascular diseases: a review

Environmental Chemistry Letters - Acute exposure to air pollution is associated with an increasing risk of death and cardiovascular disorders. Nonetheless, the impact of chronic exposure to air...     

Usefulness of Mehlich-3 test in the monitoring of phosphorus dispersion from Polish arable soils

A considerable area of soils with low abundance of plant-available phosphorus and relatively low consumption of phosphorus fertilisers recorded in Poland over the last 20–25 years suggests that the dispersion of phosphates from arable soils in Poland can be low. The literature, however, provides reports on a considerable share of Polish agriculture in phosphorus pollution of Baltic Sea waters. The literature provides no data concerning phosphorus sorption parameters of arable soils in Poland. Due to this, the study involved the analysis of sorption properties: 1-point phosphorus sorption index (PSI) and degree of phosphorus saturation, based on molar ratio P, Al, and Fe determined by the Mehlich-3 method (DPS-1_M3?=?P / (Al?+?Fe) and DPS-2_M3?=?P / Al), 59 soils representing the main types of texture of soils in Poland, characterised by variable content of plant-available phosphorus by Egner-Riehm DL, organic carbon, and soil pH. The obtained results suggest that the soil texture has a lower effect on sorption properties (PSI) than the degree of acidification. Sorption parameters of soils increased with soil acidification as a result of an increase in the content of Al and Fe extracted by the Mehlich-3 extract in strongly acidified soils. An important finding of our study was evidencing that within the same class of abundance in plant-available phosphorus, the soils varied in the degree of phosphorus saturation and content of active phosphorus. This suggests the possibility of losses of phosphorus even from soils with low abundance of the component provided they are characterised by a high value of parameters DPS-1_M3 and DPS-2_M3.     

The influence of operational conditions in sequencing batch reactors on removal of nitrogen and organics from municipal landfill leachate.

The removal of nitrogen and organics from municipal landfill leachate in sequencing batch reactors (SBR) was investigated in the present study. The influence of hydraulic retention time (HRT), sludge age, manner of leachate dosage (short filling period of SBR and filling during the reaction period), and operational conditions with and without a mixing phase in the SBR cycle was explored. Four series were performed. In each series, the HRT used in the four SBRs was 12, 6, 3 and 2 days, respectively. Series 1 and 2 were characterized by a short leachate filling period, whereas series 3 and 4 were characterized by filling during the 4 h duration of the reaction in the SBR cycle. In series 1-3 SBR reactors worked with mixing and aeration phases, whereas in series 4 they worked only with an aeration phase. The effectiveness of the removal of organics increased with the extension of the HRT of leachate, particularly under operational conditions with the mixing and aeration phases in the SBR cycle. At 12 days HRT, the SBRs with the mixing and aeration phases in the cycle (series 1-3) showed better results than those with only an aeration phase (series 4). However, at 2 days HRT the operational conditions in SBR reactors with leachate filling over the reaction period (series 3 and 4) were more suitable. The highest efficiency of ammonium removal was obtained in series 1 with a short leachate filling period. In this series, at an HRT of 3-12 days, the ammonium concentration in the effluent did not exceed 1 mg NNH4 L(-1). Nitrogen removal proceeded mainly in the aeration phase as a result of ammonium losses and, to a lesser extent, dissimilative nitrate reduction over the mixing phase. The highest percentage of nitrogen removal as a result of ammonium losses was observed in series with a short filling period and long sludge age (series 1) and also in series without a mixing phase and filling over the aeration phase (series 4), whereas the highest nitrogen consumption for biomass production occurred in series 3 with filling during the reaction period and mixing phase of the cycle.     

Occupational Exposure to Harmful Chemical Substances While Processing Phenol-Formaldehyde Resins

Air pollutants emitted while processing phenol-formaldehyde resins have been investigated. Gas chromatography-mass-selective detection was used to separate and identify chemical compounds. It was determined that workers were exposed to formaldehyde in all workplaces. Besides, phenol, acetaldehyde, acrylaldehyde, 2-furaldehyde, xylene, ethylbenzene, toluene, tetrachlorethene, ethyl acetate, butyl acetate were found during the production of frictional materials; and 2-furaldehyde, phenol, naphthalene, 2-furan-methanol, polycyclic aromatic hydrocarbons (PAHs) during the production of abrasive materials. Quantitative analyses were performed with gas chromatogra-phy and high performance liquid chromatography. Assessment of occupational exposure indicated that chemical compounds emitted during the investigated processes might be dangerous for human health, mainly because of suspected carcinogenic compounds: formaldehyde and PAHs.     

Symptoms and Clinical Findings From the Musculoskeletal System Among Operators at a Call Centre in Sweden—A 10-Month Follow-Up Study

The musculoskeletal health among 57 operators at 1 call centre in Sweden was studied with 10 monthly follow-ups, parallel to a reference group of 1,226 professional computer users in other occupations. Operators at this call centre were more symptom-loaded than the other professional computer users in spite of their younger age and shorter exposure to computer work. Symptoms were long-lasting or recurrent. Muscle tenderness and nerve affections in the neck- shoulder region were the most common specific findings and diagnoses at medical examination of incident symptom cases. More extensive studies should be done on the working conditions and health status among call centre workers.     

Cadmium,zinc, copper and metallothionein levels in the kidney and liver of humans from central Poland

Cd, Zn, Cu, and metallothionein (MT) levels have been determined in the renal cortex and liver of 70 persons who died in Lodz and its surroundings in the years 1985–1989. The mean concentrations were: 44.9±28.6 µg Cd/g, 52.0±16.7 µg Zn/g, 2.4±1.0 µg Cu/g, 0.79±0.40 µmol Hg/g, and 3.5±1.8 µg Cd/g, 66.7±30.5 µg Zn/g, 4.9±2.1 µg Cu/g, 0.50±0.38 µmol Hg/g wet tissue in renal cortex and liver, respectively, with mean age 54.0±13.8. Smokers showed 2.4 times higher levels of Cd in the renal cortex than non-smokers. The mean body burden of Cd was 33.4±17.3 mg. Smoking increases it twofold from 22.0 mg in non-smokers to 41.8 mg in smokers.This work was supported by the grant CPBR 11.12(C-56/86) from the Institute of Rural Medicine, Lublin, Poland.Deceased.     

Cadmium effect on the ovarian structure in earthworm Dendrobaena veneta (Rosa)

Cadmium effects on the ovary structure and oocytes were tested in earthworms Dendrobaena veneta exposed to 10 and 50 mg Cd kg(-1) in soil after 10 and 20 days of the experiment. In both experimental doses cadmium caused damage to the structure of the ovary but the effects were different in each group. At 10 mg Cd kg(-1) concentration in soil, young stages of oocytes and trophocytes were most sensitive to cadmium deleterious effects whereas somatic cells in the ovarian stroma were only slightly affected. Cadmium. at a concentration of 50 mg Cd kg(-1) in soil caused most damage in the somatic cells leading to the occurrence of unnaturally swollen elements and desmosomes destruction. At both experimental concentrations cadmium induced degenerative changes in cell nuclei and an increase in number of cell organelles (RER and Golgi complex elements) in the cytoplasm of oocytes and trophocytes. These also proved to be more active. No ultrastructural changes were manifested in oogonia. In both experimental groups degenerative changes occurred as early as after 10 days of Cd exposure.     

Arsenic Speciation Analysis in Water Samples: A Review of The Hyphenated Techniques

Interests in the determination of different arsenic species in natural waters is caused by the fact that toxic effects of arsenic are connected with its chemical forms and oxidation states. In determinations of water samples inorganic arsenate (As(III), As(V)), methylated metabolities (MMAA, DMAA) and other organic forms such as AsB, AsC, arsenosugars or arsenic containing lipids have the most importance. This article provides information about occurrence of the dominant arsenic forms in various water environments. The main factors controlling arsenic speciation in water are described. The quantification of species is difficult because the concentrations of different forms in water samples are relatively lowcompared to the detection limits of the available analytical techniques. Several hyphenated methods used in arsenic speciation analysis are described. Specific advantages and disadvantages of methods can define their application for a particular sample analysis. Insufficient selectivity and sensitivity of arsenic speciation methods cause searching for a new or modifications already existing techniques. Some aspects of improvement and modifications of the methods are highlighted.     

Traces of DU in samples of environmental bio-monitors (non-flowering plants, fungi) and soil from target sites of the Western Balkan region

This paper reports results of gamma and alpha spectrometric measurements for mosses, lichens, fungi and soil samples from areas in the Balkans targeted by depleted uranium (DU). Samples were collected in 2002 and 2003 in the vicinity of several villages, principally Han Pijesak (Bosnia and Herzegovina, hit by DU in 1995) and Bratoselce (South Serbia, hit by DU in 1999) and in lesser numbers from Gornja Stubla, Kosovo (which is identified as a high natural radon/thoron area) and Presevo close to the Kosovo border. In the course of gamma spectrometric measurements some results suggested samples with unusual high uranium contents which might be considered to be a signature for the presence of DU, although many samples had very high detection limits. Alpha spectrometric measurements directly proved the presence of DU for five samples, all from directly targeted places. These were samples of mosses, lichens and soil. For some samples homogeneity tests were applied which showed a rather even distribution of DU in these samples. No trace of DU was found in any sample from a dwelling.     

Sulfonated cross-linked polyethylenimine for selective removal of mercury from aqueous solutions

Polymeric materials are among the most promising, effective, and increasingly important adsorbents for the removal of toxic metals from wastewater. This study was dedicated to the development of an insoluble, modified chelating polymer for use as an adsorbent for abstraction of Hg from aqueous solutions. Cross-linked polyethylenimine (CPEI) was sulfonated by 3-chloropropanesulfonyl chloride for selective removal of Hg. The binding affinity of the sulfonated CPEI (SCPEI) to Hg was assessed as well as its ability to be regenerated for reuse. It exhibited high removal percentage for Hg up to 87% in synthetic solutions, with high selectivity even in the presence of competing ions: “Mn, Ni, Fe, Pb, Zn, and Cr.” The removal mechanism followed was observed to be adsorption and precipitation at pH 3 and 8, respectively. High adsorption capacities were also observed for wastewater to which the polymer was applied. The Freundlich isotherm was found to be the best fit describing the adsorption process of Hg onto the SCPEI. The pseudo second-order equation was found to better explain the adsorption kinetics, implying chemisorption. The thermodynamic study of the adsorption revealed high activation energies which confirmed the chemisorption as the mechanism of adsorption. The polymer exhibited up to 72% removal efficiency after regeneration, thus showing potential for re-use.