Antimicrobial potential of commercial silver nanoparticles and the characterization of their physical properties toward probiotic bacteria isolated from fermented milk products

The application of nanotechnology in the agriculture and food sector is relatively recent compared to its usage in drug delivery or pharmaceuticals. Therefore, this paper presents a study of the effect of silver nanoparticles on probiotic bacteria based on the example of Lactobacillus acidophilus LA-5, Bifidobacterium animalis subsp. lactis BB-12 and Streptococcus thermophilus ST-Y31 isolated from fermented milk products. Probiotic bacteria are one of the most crucial groups of bacteria for the food industry, because of their claimed health-promoting properties. Studies have shown that the type and concentration of silver nanoparticle solutions have a significant impact on the tested probiotic bacteria which are profitable for the digestive system. In the presence of all tested silver nanoparticles, St. thermophilus ST-Y31 growth was inhibited significantly by the dilution method as opposed to the disk-diffusion method. Both the disk-diffusion and the dilution methods showed no significant differences between L. acidophilus LA-5 and B. animalis subsp. lactis BB-12. The concentrations 2 μg mL^?1 and 0.25 μg mL^?1 had the highest antibacterial activity and statistically significant impacts on the tested probiotic strains. To our knowledge, this is the first report on potential antimicrobial effect of nanosilver against the health-promoting probiotic bacteria L. acidophilus LA-5, B. animalis subsp. lactis BB-12 and St. thermophilus ST-Y31 isolated from fermented milk products.     

Stiff Biodegradable Polylactide Composites with Ultrafine Cellulose Filler

Polylactide (PLA) composites with 10–30 wt% of commercial fine grain filler of native cellulose were prepared by melt-mixing, and examined. The composite films had esthetic appearance, glossy surface, creamy color and density close to that of neat PLA. Good dispersion of the filler in PLA matrix was achieved. The composites were stiffer than neat PLA; in the glassy region the storage modulus increased by approx. 30 %. The tensile strength of the composite materials in the temperature range from 25 to 45 °C was similar to that of neat PLA. No marked decrease in molar mass of PLA in the composites occurred during processing in comparison to neat PLA. Moreover, thermogravimetry experiments demonstrated good thermal stability of the composites; 5 % weight loss occurred well above 300 °C.     

Windsor, Ontario exposure assessment study: design and methods validation of personal, indoor, and outdoor air pollution monitoring

The Windsor, Ontario Exposure Assessment Study evaluated the contribution of ambient air pollutants to personal and indoor exposures of adults and asthmatic children living in Windsor, Ontario, Canada. In addition, the role of personal, indoor, and outdoor air pollution exposures upon asthmatic children's respiratory health was assessed. Several active and passive sampling methods were applied, or adapted, for personal, indoor, and outdoor residential monitoring of nitrogen dioxide, volatile organic compounds, particulate matter (PM; PM < or = 2.5 microm [PM2.5] and < or = 10 microm [PM10] in aerodynamic diameter), elemental carbon, ultrafine particles, ozone, air exchange rates, allergens in settled dust, and particulate-associated metals. Participants completed five consecutive days of monitoring during the winter and summer of 2005 and 2006. During 2006, in addition to undertaking the air pollution measurements, asthmatic children completed respiratory health measurements (including peak flow meter tests and exhaled breath condensate) and tracked respiratory symptoms in a diary. Extensive quality assurance and quality control steps were implemented, including the collocation of instruments at the National Air Pollution Surveillance site operated by Environment Canada and at the Michigan Department of Environmental Quality site in Allen Park, Detroit, MI. During field sampling, duplicate and blank samples were also completed and these data are reported. In total, 50 adults and 51 asthmatic children were recruited to participate, resulting in 922 participant days of data. When comparing the methods used in the study with standard reference methods, field blanks were low and bias was acceptable, with most methods being within 20% of reference methods. Duplicates were typically within less than 10% of each other, indicating that study results can be used with confidence. This paper covers study design, recruitment, methodology, time activity diary, surveys, and quality assurance and control results for the different methods used.     

Degradation of bisphenol A using UV and UV/H2O2 processes

Bisphenol A (BPA; 4-[2-(4-hydroxyphenyl)propan-2-yl]phenol) is a substance typically used in the plastic industry. It is used in the production of epoxy resins, polycarbonate, or fire retardants or as a stabilizer and an antioxidant in numerous types of plastics. Bisphenol A is introduced into the environment via municipal and industrial wastewater. Because of its hydrophobic properties, BPA has the potential for sorption on activated sludge during the biological wastewater treatment processes. This study investigated the degradation of BPA by means of UV-radiation and in the UV/H2O2 process with the presence and absence of hydrocarbonate ions (HCO3(-)) as hydroxyl radicals (OH*) scavengers. The calculated value of quantum yield was equal to 0.18, and the value of BPA rate constant with hydroxyl radicals was equal to 3.3 x 10(9) M(-1) s(-1).     

The redox state and activity of superoxide dismutase classes in Arabidopsis thaliana under cadmium or copper stress

The redox state of glutathione and ascorbate as well as the activity of superoxide dismutase classes were determined in leaves of Arabidopsis thaliana grown for seven days in the nutrient solution containing 0, 5 and 50 microM Cd or Cu excess. A decrease in GSH/GSSG ratio was found in plants under Cd and Cu stress. In the plants exposed to Cu stress the activity of all SOD classes increased. However, in the plants treated with Cd the activity of FeSOD and MnSOD was elevated, but CuZnSOD activity was diminished in comparison with control. In these plants the activity of SOD classes was dependent on both the GSH/GSSG and AA/DHA ratios, while in those exposed to Cu excess - on the GSH/GSSG ratio. Differences were shown in the changes both in redox state and activity of SOD classes caused by the metals differing in physiochemical properties. Moreover, relationships between changes in SOD class activities and ROS levels were discussed.     

Aminolysis and aminoglycolysis of waste poly(ethylene terephthalate)

This paper describes the chemical degradation of waste poly(ethylene terephthalate) (PET) with polyamines or triethanolamine, the characteristics of the products, and a search for ways to use these products. Solvolysis of the polymer ester bonds was caused by diethylenetriamine, triethylenetetramine, and their mixtures, as well as mixtures of triethylenetetramine and p-phenylenediamine or triethanolamine. Products of aminolysis or aminoglycolysis of PET obtained in reactions performed at 200–210°C (with a molar ratio of the recurrent polymer unit to amine of 1 : 2) have been characterized using nuclear magnetic resonance (NMR). Viscosity and hydroxyl number measurements have been done for PET/triethanolamine products. Substances from aminolytical reactions with polyamines were tested as hardeners for liquid epoxy resins, and the product of polymer aminoglycolysis with triethanolamine was tested as an epoxy resin hardener, e.g., for water-borne paints, and a polyol component for rigid polyurethane foams. The compositions of epoxy resin hardeners have been characterized using DSC and rheometry. Comparative analyses of the hardened epoxy materials have been done on the basis of glass temperature and mechanical properties data, as well as some specific properties of the coating materials and rigid polyurethane foams. Received: September 15, 2000 / Accepted: September 21, 2000     

Modeling the Effect of Liming on Calcium Concentration in Swedish Lakes

To abate the severe acidification of Swedish lakes are about 7% directly limed (AL-lakes). These are important to include when assessing acidification. Consequently, we need to estimate their chemical status as if they were not lime-affected. We hypothesize that there is a spatial dependence for calcium (Ca) and magnesium (Mg) concentrations. Spatial variation is determined using variograms. We study lakes within two 150 ∗ 150 km quadrates (EMEP150-grid) in the middle and southern parts of Sweden. We model Ca in AL-lakes using the Ca and Mg concentrations in nearby, unaffected lakes (UL-lakes). The mean Ca/Mg for the three or seven closest UL-lakes is used. We assume that Ca/Mg is constant for UL-lakes and that Mg unaltered by liming. For UL-lakes, Ca and Mg are spatially dependent. For AL-lakes, there is a spatial dependence for Mg, but, as anticipated, not for Ca. The modeled Ca for UL-lakes show a good correspondence with measured Ca; r ² > 0.6; slopes close to 1 and intercepts almost 0. Using three or seven nearby lakes when modeling Ca give similar results. Modeled Ca was higher than measured Ca for 36% (three closest lakes) and 38% (seven closest) of the modeled AL-lakes in the middle part of Sweden. The corresponding results for the southern part were 10% and 9%, respectively. This model is an acceptable estimator of Ca in limed lakes and for estimating critical loads and acidification status on an EMEP-scale.     

Sulfonated cross-linked polyethylenimine for selective removal of mercury from aqueous solutions

Polymeric materials are among the most promising, effective, and increasingly important adsorbents for the removal of toxic metals from wastewater. This study was dedicated to the development of an insoluble, modified chelating polymer for use as an adsorbent for abstraction of Hg from aqueous solutions. Cross-linked polyethylenimine (CPEI) was sulfonated by 3-chloropropanesulfonyl chloride for selective removal of Hg. The binding affinity of the sulfonated CPEI (SCPEI) to Hg was assessed as well as its ability to be regenerated for reuse. It exhibited high removal percentage for Hg up to 87% in synthetic solutions, with high selectivity even in the presence of competing ions: “Mn, Ni, Fe, Pb, Zn, and Cr.” The removal mechanism followed was observed to be adsorption and precipitation at pH 3 and 8, respectively. High adsorption capacities were also observed for wastewater to which the polymer was applied. The Freundlich isotherm was found to be the best fit describing the adsorption process of Hg onto the SCPEI. The pseudo second-order equation was found to better explain the adsorption kinetics, implying chemisorption. The thermodynamic study of the adsorption revealed high activation energies which confirmed the chemisorption as the mechanism of adsorption. The polymer exhibited up to 72% removal efficiency after regeneration, thus showing potential for re-use.     

Release of Cd immobilized by soil constituents and its bioavailability

Release of Cd immobilized by soil constituents (clay, humic acids, bacterial cells) in vitro and under soil conditions and its bioavailability to lettuce were studied. The most resistant to extraction with 0.02 M EDTA in vitro as well as under soil conditions was cadmium immobilized by humic acids during decomposition of contaminated plant residues but Cd‐dead cells when 0.1 M NaNO₃ was the extractant.

Cadmium addition (3 mg kg^‐1) to soil and its form were without effect on plant growth and amount of metal accumulated in roots. Tops of plants grown in soil supplemented with Cd‐resting cells contained significantly less metal then other ones.     

Role of physical activity in health promotion and (individual) sustainable development

Regular physical activity may be a tool in the prevention of sedentary behaviour, overweight, obesity, and obesity-related diseases and plays a fundamental role in health promotion. Moreover, it helps to educate, to develop tolerance and respect for others, to increase interindividual and international exchange, plays a role in social integration, and contributes to an increase in individual sustainable development (ISD). ISD is an extension of the concept of the sustainable development (SD). Its aim is to promote a long, healthy and autonomous life, in conformity with the physical and social environment and economic needs. ISD implies individual participation in the decision-making process, self-determination and freedom and/or responsibility in making individual choices.