Recycled sand in lime-based mortars

The increasing awareness of the society about safe guarding heritage buildings and at the same time protecting the environment promotes strategies of combining principles of restoration with environmentally friendly materials and techniques. Along these lines, an experimental program was carried out in order to investigate the possibility of producing repair, lime-based mortars used in historic buildings incorporating secondary materials. The alternative material tested was recycled fine aggregates originating from mixed construction and demolition waste. Extensive tests on the raw materials have been performed and mortar mixtures were produced using different binding systems with natural, standard and recycled sand in order to compare their mechanical, physical and microstructure properties. The study reveals the improved behavior of lime mortars, even at early ages, due to the reaction of lime with the Al and Si constituents of the fine recycled sand. The role of the recycled sand was more beneficial in lime mortars rather than the lime–pozzolan or lime–pozzolan–cement mortars as a decrease in their performance was recorded in the latter cases due to the mortars’ structure.     

The temporal stability and developmental differences in the environmental impacts of militarism: the treadmill of destruction and consumption-based carbon emissions

This study examines the relationship between national-level militarism and consumption-based carbon dioxide emissions. We analyze panel data from 1990 to 2010 for 81 nations to determine whether the magnitude of the effects of (1) military expenditures as percent of total gross domestic product and (2) military personnel as percent of total labor force on carbon emissions change over time. Results of two-way fixed effects models highlight the temporal stability of the environmental impacts of both national-level military characteristics. The findings also reveal that the effect of military expenditures on emissions is larger in the more developed OECD nations than in the developing non-OECD nations. Overall, the results support the treadmill of destruction perspective, which suggests that the nations’ militaries are an important social institution to consider in sustainability science research on the human drivers of global environmental change.     

Application of activated M/ZnO (M = Mn,Co, Ni,Cu, Ag) in photocatalytic degradation of diazo textile coloring dye

Activated ZnO powder has been prepared by procedures involving first its dissolution in nitric acid, then simultaneous treatment by adding NH₄OH and CO₂ bubbling leading to precipitation as Zn(OH)CO₃ (ZH) and further thermal decomposition of ZH at 400 °C. The gas evolution leads to formation of pores and increase in the specific surface area. Chemically activated M/ZnO powders doped with Mn, Co, Ni, Cu, and Ag have been obtained by the impregnation method. The samples have been characterized by ultraviolet-visible (UV-Vis) spectroscopy, diffuse reflectance (DR) UV-Vis, X-ray diffraction (XRD), single point Brunauer–Emmet–Teller (BET), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS) methods. The experiments have shown that metal-doped activated ZnO powders possess higher photocatalytic activities in oxidative discoloration of model contaminant textile coloring dye Reactive Black 5 in slurry reactor compared to that of the pure ZnO. The XRD and XPS data have shown the presence of defects, nonstoichiometricity implying the formation of solid solutions. Copper-doped (1.5 wt%) activated ZnO (Cu²⁺ replaces Zn²⁺) is outstanding in its photocatalytic performance in discoloration of the dye due to the higher specific surface area and improved charge carrier separation.     

Carbon dioxide emissions,output, and energy consumption categories in Algeria

This study examines the relation between CO₂ emissions, income, non-renewable, and renewable energy consumption in Algeria during the period extending from 1980 to 2011. Our work gives particular attention to the validity of environmental Kuznets curve (EKC) hypothesis. The autoregressive distributed lag (ARDL) with break point method outcome demonstrates the positive effect of non-renewable type of energy on CO₂ emissions consumption. On the contrary, the results reveal an insignificant effect of renewable energy on environment improvement. Moreover, the results accept the existence of EKC hypothesis but the highest gross domestic product value in logarithm scale of our data is inferior to the estimated turning point. Consequently, policy-makers in Algeria should expand the ratio of renewable energy and should decrease the quota of non-renewable energy consumption.     

Predictive Model of Avian Electrocution Risk on Overhead Power Lines

Electrocution on overhead power structures negatively affects avian populations in diverse ecosystems worldwide, contributes to the endangerment of raptor populations in Europe and Africa, and is a major driver of legal action against electric utilities in North America. We investigated factors associated with avian electrocutions so poles that are likely to electrocute a bird can be identified and retrofitted prior to causing avian mortality. We used historical data from southern California to identify patterns of avian electrocution by voltage, month, and year to identify species most often killed by electrocution in our study area and to develop a predictive model that compared poles where an avian electrocution was known to have occurred (electrocution poles) with poles where no known electrocution occurred (comparison poles). We chose variables that could be quantified by personnel with little training in ornithology or electric systems. Electrocutions were more common at distribution voltages (≤33 kV) and during breeding seasons and were more commonly reported after a retrofitting program began. Red‐tailed Hawks (Buteo jamaicensis) (n = 265) and American Crows (Corvus brachyrhynchos) (n = 258) were the most commonly electrocuted species. In the predictive model, 4 of 14 candidate variables were required to distinguish electrocution poles from comparison poles: number of jumpers (short wires connecting energized equipment), number of primary conductors, presence of grounding, and presence of unforested unpaved areas as the dominant nearby land cover. When tested against a sample of poles not used to build the model, our model distributed poles relatively normally across electrocution‐risk values and identified the average risk as higher for electrocution poles relative to comparison poles. Our model can be used to reduce avian electrocutions through proactive identification and targeting of high‐risk poles for retrofitting. Modelo Predictivo del Riesgo de Electrocución de Aves en Líneas Eléctricas Elevadas     

Optimal Policy Mechanism Design for Cross-Sector and Multi-Stage Pollution Control with a Bilevel Model: Application to SO<Subscript>2</Subscript> Emission in China

In this paper, we construct a multi-stage coordinated programming model under tax system to control SO₂ emission. The model is based on an explicitly formulated SO₂ abatement cost function created under Chinese condition. Analysis of the effectiveness and impact on the economy of the model is carried out with consideration of game theory. By solving the model, theoretical results show that the volume-based multi-stage SO₂ tax system has two properties: effectiveness and equal-rate. Based on these theoretical results, empirical study is also performed using Chinese historical data. Compared with yearly single-stage programming model, the tax rate generated by the coordinated multi-stage programming model is time-invariant and rather moderate in scale. The total abatement cost among planning years in our model is 21.03 % less than the actual number and 6.68 % less than that in the single-stage situation. The tax payment suggested by our model is 10.62 % less than by the single-stage model. In general, a coordinated multi-stage programming model helps reduce the overall costs of environmental protection while achieving the same emission control target with less burden added to the economy.     

The measurement of water scarcity: Defining a meaningful indicator

Metrics of water scarcity and stress have evolved over the last three decades from simple threshold indicators to holistic measures characterising human environments and freshwater sustainability. Metrics commonly estimate renewable freshwater resources using mean annual river runoff, which masks hydrological variability, and quantify subjectively socio-economic conditions characterising adaptive capacity. There is a marked absence of research evaluating whether these metrics of water scarcity are meaningful. We argue that measurement of water scarcity (1) be redefined physically in terms of the freshwater storage required to address imbalances in intra- and inter-annual fluxes of freshwater supply and demand; (2) abandons subjective quantifications of human environments and (3) be used to inform participatory decision-making processes that explore a wide range of options for addressing freshwater storage requirements beyond dams that include use of renewable groundwater, soil water and trading in virtual water. Further, we outline a conceptual framework redefining water scarcity in terms of freshwater storage.     

Leaching behaviour of different scrap materials at recovery and recycling companies: Full-, pilot- and lab-scale investigation

Scrap material recovery and recycling companies are confronted with waste water that has a highly fluctuating flow rate and composition. Common pollutants, such as COD, nutrients and suspended solids, potentially toxic metals, polyaromatic hydrocarbons and poly chlorinated biphenyls can exceed the discharge limits. An analysis of the leaching behaviour of different scrap materials and scrap yard sweepings was performed at full-scale, pilot-scale and lab-scale in order to find possible preventive solutions for this waste water problem. The results of these leaching tests (with concentrations that frequently exceeded the Flemish discharge limits) showed the importance of regular sweeping campaigns at the company, leak proof or covered storage of specific scrap materials and oil/water separation on particular leachates. The particulate versus dissolved fraction was also studied for the pollutants. For example, up to 98% of the polyaromatic hydrocarbons, poly chlorinated biphenyls and some metals were in the particulate form. This confirms the (potential) applicability of sedimentation and filtration techniques for the treatment of the majority of the leachates, and as such the rainwater run-off as a whole.