Natural Products: Repellency and Toxicity of Wild Tomato Leaf Extracts to the Two-Spotted Spider Mite,Tetranychus urticae Koch

The potential of using phytochemicals from leaves of wild tomato for controlling the two-spotted spider mite, Tetranychus urticae Koch, is explored in this study as a promising alternative to the use of synthetic pesticides. Wild tomato accessions of Lycopersicon hirsutum plants that are not consumed by humans were planted under greenhouse conditions for mass production of leaves. Crude extracts from leaves of three accessions of L. hirsutum, six accessions of L. hirsutum f. glabratum, and one accession each of L. pennellii and L. pimpinellifolium were prepared in chloroform, ethanol and hexane. Two spider mite bioassays, one a measure of antibiosis and the other a measure of repellency, were utilized to determine the acaricidal performance of the crude extracts. The bioassay for antibiosis was a 6-h no-choice test. The bioassay for repellency utilized a ring bioassay. Chloroform leaf extracts of L. hirsutum f. glabratum accessions (PI-251304, PI-134417, PI-134418, and PI-126449) exhibited greatest antibiotic activity on two-spotted spider mites; the hexane extracts exhibited greatest repellency. Extracts from PI-251304, PI-126449, PI-134417, and PI-134418 were especially lethal (chloroform) or repellent (hexane). We investigated differences in chemical composition of the crude leaf extracts that may explain the observed differences in mortality and repellency among the different accessions. Major chemical compounds (α -curcumene, α -zingiberene, trans-caryophyllene, 2-undecanone, and 2-tridecanone) known to have pesticidal efficacy were detected and quantified in the crude leaf extracts using a gas chromatograph (GC) equipped with a mass spectrometer (GC/MS). Lethality of extracts was mainly associated with the presence of high concentrations of 2-tridecanone; repellency of extracts was mainly associated with the presence of trans-caryophyllene. Leaf extracts of L. hirsutum f. glabratum accessions that contain significant quantities of 2-tridecanone and/or trans-caryophyllene could be useful for managing populations of spider mites, which could reduce reliance on synthetic pesticides.     

Sorption of Pesticides on Kaolinite and Montmorillonite as a Function of Hydrophilicity

Pesticides and other organic species are adsorbed by soil via different mechanisms, with bond strengths that depend on the properties of both the soil and the pesticide. Since the clay fraction in soil is a preferential sorbent for organic matter, reference kaolinite and montmorillonite are useful models for studying the mechanism and the strength of sorption. This paper presents the results of batch experiments to investigate the interactions of kaolinite KGa-1 and montmorillonite SWy-1 with the following pesticides and organic species resulting from the natural degradation of pesticides in the environment: atrazine (1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine), simazine (1-chloro-3,5-bisethylamino-2,4,6-triazine), diuron [1,1-dimethyl-3-(3,4-dichlorophenyl)urea], aniline, 4-chlorophenol, 2,4-dichlorophenol, and 2,4,6-trichlorophenol. Each of these chemicals has different hydrophilicity. Systems containing 2.0 g of clay were put in contact with 100.0 mL of solutions of the pesticides at known concentration ranging from 1.0 to 5.0 mg/L, and the amount of solute adsorbed was evaluated through RP-HPLC analysis of the pesticide still present in the aqueous suspension. To test for electrostatic interactions between the clay surface and the pesticides, potentiometric titration was used to determine the permanent surface charge of clays. Experiments were performed at different pH values. The results indicate that, for the chemicals studied, neutral molecules are preferentially retained relative to ionized ones, and that montmorillonite is a more effective sorbent than kaolinite.     

Screening Capsicum Accessions for Capsaicinoids Content

Ninety Capsicum accessions selected from the USDA Capsicum germplasm collection were screened for their capsaicinoids content using gas hromatography with nitrogen phosphorus detection (GC/NPD). Fresh fruits of Capsicum chinense, C. frutescens, C. baccatum, C. annuum, and C. pubescens were extracted with methanol and analyzed for capsaicin, dihydrocapsaicin, and nordihydrocapsaicin. Mass spectrometry of the fruit crude extracts indicated that the molecular ions at m/z 305, 307, and 293, which correspond to capsaicin, dihydrocapsaicin, and nordihydrocapsaicin, respectively, have a common benzyl cation fragment at m/z 137 that can be used for monitoring capsaicinoids in pepper fruit extracts. Capsaicin and dihydrocapsaicin were the dominant capsaicinoids detected. Capsaicin concentrations were typically greater than dihydrocapsaicin. Concentrations of total capsaicinoids varied from not detectable to 11.2 mg fruit^?1. Statistical analysis revealed that accession PI-441624 (C. chinense) had the highest capsaicin content (2.9 mg g^?1 fresh fruit) and accession PI-497984 (C. frutescens) had the highest dihydrocapsaicin content (2.3 mg g^?1 fresh fruit). Genebank accessions PI-439522 (C. frutescens) and PI-497984 contained the highest concentrations of total capsaicinoids.     

Antioxidants in Hot Pepper: Variation Among Accessions

The U.S. Department of Agriculture (USDA) pepper (Capsicum spp.) germplasm collection contains several thousand members or accessions. Many of these species and cultivars have not been analyzed for their concentrations of ascorbic acid, capsaicin, and total phenolic compounds, which are important antioxidants having a number of benefits for human health. The objective of this investigation was to select candidate accessions of hot pepper having high concentrations of ascorbic acid, capsaicin, free sugars, and total phenols for use as parents in breeding for these compounds. Seventeen accessions of pepper from the core Capsicum germplasm collection (four accessions of Capsicum chinense; five accessions of C. baccatum; six accessions of C. annuum; and two of C. frutescens) were field grown and their mature fruits were analyzed for their antioxidant composition. Concentrations of these compounds tended to be higher in C. chinense and C. baccatum, than in C. annuum and C. frutescens. Across all accessions the concentration of total phenols was correlated with ascorbic acid (r = 0.97) and free sugars (r = 0.80). Concentrations of total phenols (1.4, 1.3, and 1.3 mg g^?1 fruit) and ascorbic acid (1.6, 1.2, and 1.3 mg g^?1 fruit) were significantly greater in PI-633757, PI-387833, and PI-633754, respectively, compared to other accessions analyzed. Total capsaicinoids concentrations were greatest (1.3 mg g^?1 fruit) in PI-438622 and lowest (0.002 mg g^?1 fruit) in Grif-9320. The great variability within and among Capsicum species for these phytochemicals suggests that these selected accessions may be useful as parents in hybridization programs to produce fruits with value-added traits.     

The Effect of Nucleating Particulates on Photochemical Aerosol Formation

The role of nucleating particulates in the formation of photochemical aerosols has been studied in a steady, laminar flow of ultrafiltered air containing NO₂ and octene-1 in the concentration range of (30 to 170 ppm) when subjected to intense irradiation under isothermal conditions. The particulates consisted of monodisperse polystyrene latex (d = 0.36 μ.) in concentrations similar to those in the atmosphere (6 × 10¹ to 3 × 10³ cm^–3); the irradiation intensity varied between (6 to 40 × 10³ lumen/liter) and the mean exposure duration between 30 and 180 sec. Samples of the flow prior to and after its photoactivation were withdrawn either by an Aerosol Spectrometer (AS) or by a Royco Aerosol Photometer (PH). While these indications refer thus to the same system, they differ, because the photometric data include all colloidal components in the airborne state, whereas the counts obtained from the AS deposits refer only to the nucleated latex particles. The following pattern becomes evident: The photochemical reaction yields fractional products (less than three percent) which have the tendency to agglomerate (or polymerize) due to their relatively low volatility—independent of the presence or absence of nucleating particulates. In their presence, this reaction becomes kinetically more probable and thus faster, hence the accumulant formation occurs preferably on the nuclei and causes their growth such that, e.g., a 10-fold higher nuclei concentration will produce under the same conditions 10 times the accumulant mass while autonucleation is suppressed. The growth process appears thus principally different from that of fog formation by H₂O-condensation, whereas for identical super saturation it is inversely proportional to the nuclear concentration. In the absence of nuclei autonucleation, i.e., self-agglomeration, occurs at a much lesser reaction rate and higher photon demand. The growth rate of the nuclei, when present, depends on the concentration of the oxidation catalyst (NO₂), its interaction with the nuclei surface is indicated. Under identical conditions the mass of nuclear accumulant is directly proportional to the concentration of the reactive hydrocarbon, while the growth rate depends on the light intensity and the exposure duration. The findings indicate that density and nature of particulate matter present in an air mass prior or during photo-activation are—aside from the chemical reactant levels—of major significance in aerosol formation.     

Sulfur Dioxide Removal and Recovery from Pulp Mill Power Plants

The use of soda ash liquor to scrub SO₂ rich power plant flue gases was studied using an Airetron pilot scrubber with a maximum capacity of 3000 cfm. The relative effects of the major operating variables— temperature, soda ash concentration, and the gas/liquid flow ratio—on the absorption phenomenon were determined. Orthogonal factorial experiments were used to derive a response function relating mass transfer values to operating variables. The economics of a full scale NSSC installation are discussed.     

Instrumenting Light Aircraft for Air Pollution Research

Light aircraft and helicopters have been occasionally used to conduct aerial traverses for a single pollutant or atmospheric tracer. The continuous analyzer or sample collector is temporarily tied down with a seat belt or hand held. Flight variables are visually observed and written on the recorder chart, a notebook or possibly voice-recorded on a portable tape recorder. The versatile airborne instrumentation package described can measure and record up to 27 pollutant and flight variables from a Cessna Skymaster center-line thrust, light twin. Real-time analysis instrumentation include non-dispersive infrared analyzers for CO₂, CO, and hydrocarbons, conductivity and coulometric analyzers for sulfur dioxide and sulfur-containing gases, and Charlson-Ahlquist visual range nephelometer. A Battelle “bulk sampler” is used to collect particulates for weighing and microscopic examination. Indicated air speed, altitude, rate of climb, magnetic heading, temperature, and relative humidity are continuously measured. All variables are sequentially recorded on a 7-track, 200 bit per second, 27-channel, magnetic tape data logging system. Measured variables are recorded once each 0.3 to 0.8 sec—equivalent to 33-100 ft of traversedepending upon the number of variables recorded (i.e., between 9 and 27) when flying at 90 mph. Tape data are reduced directly by IBM 360 computer to a digital print-out or from tape to an X-Y analog plot.     

Photochemical Reactivities of Paraffinic Hydrocarbon-Nitrogen Oxide Mixtures Upon Addition of Propylene or Toluene

Effects associated with photochemical air pollution were measured during irradiation of n-butane-nitrogen oxide or n-butane-ethane-nitrogen oxide mixtures, with small amounts of propylene or toluene added. The effects measured including nitrogen dioxide and oxidant dosages, yields of formaldehyde and peroxy-acetyl nitrate, and eye irritation response. The results obtained clearly show that beneficial effects result from selective changes in hydrocarbon composition as well as from reduction of total hydrocarbon concenfration. Exclusion of olefins and alkylbenzenes was highly effective in reducing oxidant dosage, formaldehyde and peroxyacetyl nitrate concentrations, and eye irritation response. The only penalty was a modest increase in nitrogen dioxide dosage. A large reduction in nitrogen oxide concentration reduced nitrogen dioxide dosage and eye irritation response, but with the penalty of a large increase in oxidant dosage. The desirability of preferentially reducing olefins and alkylbenzenes rather than paraffinic hydrocarbons, acetylene, and benzene is strongly supported by this study. Research and development efforts should be directed toward preferential hydrocarbon control by mechanical or catalytic control