Conservation in a Region of Political Instability: Bwindi Impenetrable Forest, Uganda

Abstract: Bwindi Impenetrable is the most important forest in Uganda for conservation of biodiversity. It contains over half the world's mountain gorillas. It is surrounded by densely populated agricultural land and lies within a region of political instability. Gazetted as a forest reserve in 1932, little forest now remains outside its boundaries. Transformation of nearby communal swampland to farmland, much owned by a few individuals, shows the probable fate of Bwindi if it had not been declared a protected area. Widespread illegal logging and other activities were among reasons why the status of the forest was raised to national park in 1991. This resulted in local resentment, fed by inadequate consultation and concern about the local people's loss of access to resources. Fires were set in the forest and threats made against the gorillas. Three schemes to provide benefits from the existence of the forest to communities and involve them in park management were then instituted: agreements allowing controlled harvesting of resources in the park, receipt of some revenue from tourism, and establishment of a trust fund partly for community development. Tension between people and park has been reduced. This case demonstrates the importance of protected areas and community involvement in such circumstances. Community support is especially critical, as here, when resources available to park managers are limited and political instability endemic.     

Will Observation Error and Biases Ruin the Use of Simple Extinction Models?

Abstract: Estimating the risk of extinction for populations of endangered species is an important component of conservation biology. These estimates must be made from data that contain both environmental noise in the year-to-year transitions in population size (so-called "process error"), random errors in sampling, and possible biases in sampling ( both forms of observation errors). To determine how much faith to place in estimated extinction rates, it is important to know how sensitive they are to observation error. We used three simple, commonly employed models of population dynamics to generate simulated population time series. We then combined random observation error or systematic biases with those data, fit models to the time series data, and observed how close the extinction dynamics of the fitted models compared with the dynamics of the underlying models. We found that systematic biases in sampling rarely affected estimates of extinction risk. We also found that even moderate levels of random observation error do not significantly affect extinction estimates except over a small range of process errors, corresponding to the region where extinction risk is most uncertain. With more substantial sampling error, estimates of extinction risk degraded rapidly. Field census techniques for a variety of taxa often involve observation errors within ±32% of actual population sizes. For typical time series used in conservation, therefore, we often may not need to be overly concerned about observation errors as an extra source of imperfection in our estimated extinction rates.     

Soft intervention technology as a tool for integrated coastal zone management

After introducing soft defence techniques as an alternative to hard defence techniques, the need is emphasized to consider the coastal area as an integral system. By recalling the main driving factors for coastal management: conflict resolution, resilience and sustainability, we logically arrive at the concepts of ecological engineering and ecotechnology, which are increasingly acknowledged as possible solutions to achieve sustainable use of coastal space as a resource. In this context, we refer to the principles of self design and of ecosystem conservation. In order to deal with real situations we are in need of fundamental ‘tools’ for the application of the soft intervention technology approach. We therefore introduce the concept of physiographic units and develop an initial elaboration for a coastal stretch and for coastal wetlands. The latter deserve more attention because of the already established practices of ecotechnology, at least as far as water and soil quality are concerned, but certainly also concerning morphology, especially in the future. We conclude by briefly discussing how activities undertaken in two research projects currently being conducted under the framework of the Marine Science and Technology Program of the Commission of the European Communities are expected to contribute to the concepts introduced here.     

Analysis of uncertainty consideration in environmental assessment: an empirical study of Canadian EA practice

Identifying and communicating uncertainty is core to effective environmental assessment (EA). This study evaluates the extent to which uncertainties are considered and addressed in Canadian EA practice. We reviewed the environmental protection plans, follow-up programs, and panel reports (where applicable) of 12 EAs between 1995 and 2012. The types of uncertainties and levels of disclosure varied greatly. When uncertainties were acknowledged, practitioners adopted five different approaches to address them. However, uncertainties were never discussed or addressed in depth. We found a lack of suitable terminology and consistency in how uncertainties are disclosed, reflecting the need for explicit guidance, and we present recommendations for improvement. Canadian Environmental Impact Statements are not as transparent with respect to uncertainties as they should be, and uncertainties in EA need to be better considered and communicated.     

An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.     

A Solvent-Free Approach for Production of Films from Pectin and Fungal Biomass

Self-binding ability of the pectin molecules was used to produce pectin films using the compression molding technique, as an alternative method to the high energy-demanding and solvent-using casting technique. Moreover, incorporation of fungal biomass and its effects on the properties of the films was studied. Pectin powder plasticized with 30% glycerol was subjected to heat compression molding (120 °C, 1.33 MPa, 10 min) yielding pectin films with tensile strength and elongation at break of 15.7 MPa and 5.5%, respectively. The filamentous fungus Rhizopus oryzae was cultivated using the water-soluble nutrients obtained from citrus waste and yielded a biomass containing 31% proteins and 20% lipids. Comparatively, the same strain was cultivated in a semi-synthetic medium resulting in a biomass with higher protein (60%) and lower lipid content (10%). SEM images showed addition of biomass yielded films with less debris compared to the pectin films. Incorporation of the low protein content biomass up to 15% did not significantly reduce the mechanical strength of the pectin films. In contrast, addition of protein-rich biomass (up to 20%) enhanced the tensile strength of the films (16.1–19.3 MPa). Lastly, the fungal biomass reduced the water vapor permeability of the pectin films.     

The Influence of Artificial Photodegradation on Properties of Poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate)(PHBV)/Graphite Nanosheets (GNS) Nanocomposites

The potential use of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/graphite nanosheets (GNS) as a biodegradable nanocomposite has been explored. PHBV/GNS nanocomposites films were prepared by solution casting at various concentrations of GNS—0.25, 0.50 and 1.00 wt% GNS. The films were exposed to artificial ultraviolet radiation (UV) during 52 h. The effect of GNS on PHBV photodegradation was investigated and compared to neat PHBV film. The artificial photodegradation induced changes in physical (weight loss), chemical carbonyl index by Fourier transform infrared spectroscopy, thermal degree of crystallinity and melting temperature by differential scanning calorimetry and morphological scanning electron microscopy characteristics. Based on the results obtained from aforementioned analyzes it was verified that GNS inhibits the oxidative degradation of PHBV matrix.     

One-Component Spray Polyurethane Foam from Liquefied Pinewood Polyols: Pursuing Eco-Friendly Materials

The use of petroleum-derived products should be avoided regarding the principles of green and sustainable chemistry. The work reported herein, is aimed at the liquefaction of pine shavings for the production of an environmentally-friendly polyol suitable to be used in the formulations of sprayable polyurethane foams. The biopolyols were obtained in high yield and were used to replace those derived from fossil sources, to produce more “greener” polyurethane foams and therefore, less dependent on petroleum sources, since the polyol component was substituted by products resulting from biomass liquefaction. The partial and fully exchange of the polyols was accomplished, and the results compared with a reference foam. The foams were afterward, chemical, physical, morphological, and mechanically characterized. The complete replacement of polyether polyol and polyol polyester has presented some similar characteristics as that used as a reference, validating that the path chosen for the development of more sustainable materials is on the right track for the contribution to a cleaner world.